VXR
-
9000
E
SERIES
25 Watt Rack-Mount FM Repeater
FREQUENCY RANGE: 146 – 174 MHz (VHF)
440 – 470 MHz (UHF)
32 CHANNELS SYNTHESIZED
POWER OUTPUT: 25 W
WIDE OR NARROW BANDWIDTH
PROGRAMMABLE
PLL STEP SIZES: 2.5/5.0/6.25 kHz
LOW LEVEL AND HIGH LEVEL ENCRYPTION
OPTIONS
8 cm SQUARE COOLING FAN WITH
"MALFUNCTION"
CTCSS REVERSE BURST WITH
PROGRAMMABLE LENGTH
MULTI-TONE DECODE
5-STEP COMMAND SEQUENCE FOR STARTUP,
POWER SOURCE: MAIN TO SUB, AND SUB TO MAIN
CW ID AND CW MESSAGES SELECTED BY TRIGGER
COAXIAL RELAY DRIVERS FOR SINGLE
ANTENNA OPERATION; ALSO TX ATTENUATOR
PROGRAMMED MESSAGE BANKS FOR
MAINTENANCE LOGS OR ANY OTHER FREE TEXT
REPEATER OCCUPATION SETTINGS TO HOLD
THE LAST TONE CODE (PRESET TIMER)
AUDIO VOICE COMPANDING BUILT IN
CHANNEL SCANNING WITH PRIORITY CHANNEL
AUTOMATIC DC BACKUP SWITCHING WITH ALERT
PER CHANNEL
SENSOR OUTPUT
VXR
-
9000
25 Watt Rack-Mount FM Repeater
E
SERIES
HIGH PERFORMANCE
25 WATTS OF POWER
The VXR-9000E provides 25 Watts of clean, reliable power
output in its standard configuration.
EXCELLENT RECEIVER PERFORMANCE
The VXR-9000E is crafted to survive in the most difficult RF
environments. Outstanding selectivity, intermodulation
rejection, and spurious and image rejection performance
ensure reliable service during peak spectrum congestion times.
AUDIO COMPANDING PER CHANNEL
The VXR-9000E’s versatile configuration capability permits
inclusion
wide-band, non-compandered
DC BACKUP WITH ALERT
Should DC power fail at the repeater site, the VXR-9000E
will automatically revert to a backup DC power source, if
available. Under emergency DC power, the repeater will
transmit an alert message, to alert the communications
supervisor that the DC power situation requires immediate
attention at the repeater site.
of
narrow-band, compandered channels among
channels.
CONSERVATIVE DESIGN FOR HIGH RELIABILITY
The large-diameter cooling fan (8 cm) is thermostatically
controlled, ensuring a stable temperature environment for
the VXR-9000E. Fan operation may be programmed via
software (Off, Continuous, or Temperature-Controlled),
and a "Malfunction" alarm is provided.
VERSATILITY
READY FOR RACK MOUNTING
For easy integration into existing repeater sites, the VXR9000E is shipped ready for mounting in a standard 19"
32 CHANNEL CAPACITY
The VXR-9000E may be dealer-programmed with up to
32 channels over a wide frequency range, and may be
operated either in a "Repeater" or "Base Station" mode,
depending on your application.
SIX DUAL-FUNCTION PROGRAMMABLE KEYS ON
FRONT PANEL
Over twenty different functions are available for selection
and assignment to any of the six dual-function programmable
keys on the front panel of the VXR-9000E. These functions
include Channel Up/Down, High/Low Power, Repeater/Base
mode, Encryption On/Off, Transmit/Receive, Panel Lights
On/Off, and many more!
Reliable in operation, and flexible in setup options, the VXR-9000E is a high-tech 25Watt FM Repeater designed for advanced commercial applications. Its slim-line design
is crafted for easy installation in a standard 19-inch rack mount, and all programming
parameters may be accomplished by the Dealer in minutes using a personal computer
and Vertex Standards CE60 Programming Software.
DSUB 25-PIN ACCESSORY CONNECTOR ON REAR PANEL
For convenient interfacing to external controllers or other
accessories,
provides access to
for a specialized connector.
the rear-panel DSUB 25-Pin Accessory Jack
important repeater circuitry without the need
PROGRAMMABLE MESSAGE BANKS
Enter date, subject, and notes such as programming or
service memos, for recall at any time in the future.
SECURITY
SELECTABLE ENCRYPTION OPTIONS
The VXR-9000E may be set up for either rolling code or
inversion-type encryption (optional module required). The
security required by your customer is available for easy
installation.
FIVE-STEP AUTOMATIC COMMAND SEQUENCE
During certain operating events (such as Startup, switch
from main DC to backup DC, etc.) the VXR-9000E may be
programmed to undertake an automatic sequence of
commands, so it can be configured for the particular event.
For example, if DC fails and the repeater switches to
emergency DC, the repeater can be set up to switch to
Low Power, send a CW ID advising of
situation, and other auto-command sequences, as well.
the DC power
TWO-TONE DECODE STARTUP
The VXR-9000E may be booted up using two-tone
commands. Four popular two-tone formats are supported,
and the precise frequencies of each of the two tones may
be manually adjusted from 100 Hz to 5 kHz, in 0.1 Hz
steps.
Specifications
VXR-9000E (VHF) VXR-9000E (UHF)
General Specifications
Frequency Range
146~174 MHz (C) 440~470 MHz (CS)
Number of Channels 32 Channels
Channel Spacing 2.5 kHz/5 kHz/6.25 kHz
Operating Voltage 13.6V DC ±10 %
Current Drain 8 A Maximum
Duty Cycle Receive : 100 % , Transmit : 100 % (@12.5 W output)
Frequency Stability 1.5 ppm , 1.0 ppm (30 min after wake up)
Operating Temperature Range
Dimensions (W x H x D) 19" x 3.5" x 13.5" (483 x 88 x 343 mm)
Weight (approx.) 21.4 lbs. (9.7 kg)
Receiver Specifications
Antenna Impedance 50 Ohms
Antenna Connector BNC
Receiver Type Double-Conversion Superheterodyne
Sensitivity -4 dBµ EMF (20dB SINAD)
Selectivity 70 dB (Wide), 60 dB (Narrow)
Intermodulation 70 dB
Image Rejection 70 dB
Squelch Threshold
Audio Output 4 W @ 4 Ohms
Audio Distortion < 3 %
Hum and Noise > 50 dB
Audio Frequency Response
Conducted Spurious < –90 dBm
Transmitter Specifications
RF Output Power (50 W) 50/25/10 W (High/Mid/Low)
Antenna Impedance 50 Ohms
Antenna Connector Type-N
Modulation Type 16K0F3E/8K50F3E
System Deviation ±5.0 kHz (Wide), ±2.5 kHz (Narrow)
Hum and Noise >50 dB (Wide), >45 dB (Narrow)
Microphone Sensitivity 5mV
Audio Frequency Response
Spurious Emission -36 dBm <1 GHz, -30 dBm >1 GHz
Audio Distortion 2.5% @1 kHz
Microphone Impedance 600 Ohms
Measurements per EN 300 086 standards unless noted above. Specifications subject to change without
notice or obligation. Various accessories listed may not be available in some countries.
De-emphasis : 6 dB/oct (From 300 Hz to 3 kHz)
Pre-emphasis : 6dB/oct (From 300 Hz to 3 kHz)
134~160 MHz (A) 400~430 MHz (A)
–22° F to +140° F (–30° C to +60° C)
0.4
µV (Adjustable)
Accessories & Options
MD-11A8J Desktop Microphone
MH-27A8J Hand Microphone
FVP-25 Encryption Unit
FVP-35
FIF-9 4 Wire Line Interface Unit
Supplied Accessories
DC Power Cord, Blade Fuse,
Knob Cap
Rolling Code Encryption Unit
Rear Panel
Backup Power Source Terminals
External Speaker Jack
VERTEX STANDARD CO., LTD.
4-8-8 Nakameguro, Meguro-ku, Tokyo 153-8644, Japan
For our latest product news, visit us on the Internet:
http://www.vxstd.com
2004.0305NA(EU)
B9200457 Printed in Japan
Circuit Protection Fuse
Main Power Source Connector
VERTEX STANDARD
US Headquarters
10900 Walker Street, Cypress, CA 90630, U.S.A.
YAESU EUROPE B.V.
P.O. Box 75525, 1118 ZN Schiphol, The Netherlands
YAESU UK LTD.
Unit 12, Sun Valley Business Park, Winnall Close
Winchester, Hampshire, SO23 0LB, U.K.
VERTEX STANDARD HK LTD.
Unit 5, 20/F., Seaview Centre, 139-141 Hoi Bun Road,
Kwun Tong, Kowloon, Hong Kong
RX Antenna Jack
http://www.yaesu.co.uk
E-mail: sales@yaesu.co.uk
TX Antenna Jack
D-SUB 25-pin Accessory Connector
www.vertexstandard.com
http://www.vxstd.com.hk
Loading...