Vertex Puratek Installation And Maintenance Manual

Puratek Aquarium Reverse Osmosis

Installation and Maintenance Manual

Thank You for your purchase of a Puratek System by Vertex™ Aquaristik. With
proper installation and maintenance, this system will provide you with high quality
water for years to come. All Puratek products are rigorously tested for safety,
efficiency and reliability.
We prioritize with ease of use, Maximum Purity & Minimum Waste water
production.
Please take a moment to read these instructions to ensure optimal performance.
When using or installing electrical devices, take care and/or consult a
professional. Your safety is our number one concern.

Important Reminders

Be sure to follow these directions carefully. Failure to do so may result in damage
to your Puratek RO Unit and or possible damage to property.

Dealers and or the manufacturer are not responsible & cannot be held
accountable for any personal or property damage resulting from the use or
misuse of this product.

Carefully remove your new Puratek RO Unit from its original packaging, inspect
the unit for damages. All damages must be reported to your dealer WITHIN 48
hours of receipt and marked by the delivery driver on the waybill.
Each Puratek RO Unit will have the following parts:

- Top Bracket including: Auto shut off, Oil filled pressure gauge, Restrictor
bypass valve, Reverse Osmosis Chamber

- 100 GPD Reverse Osmosis Membrane

- Clear Canister for Sediment filter and sediment filter.

- Clear Canister for Carbon block and Carbon block.

- 0.25” OD tubing.

- Water line connections & Accessories.

- Filter Housing wrench.

Once you have verified that there is no damage and that all the parts are present,
you may begin installation.

System Specifications

Daily Production: 100GPD / 264l
Inlet Water Temperature: 5-45℃ / 41-113 F

Main Rejection: 99%
Treatment Stages: 3
Back Flush: Manual

Reverse Osmosis layout and components

Installation

Chambers when facing the Puratek unit

3

Left right

2 1