VersiVision FVT1103, FVT1104, FVT1105, FVR1103, FVR1104 Technical Manual

VersiVision

FVT1100/FVR1100 Series

Fiber Optic Video Modems

Technical Manual

Also covers FVR1100M modules

Copyright Aug 2005

VERSITRON, Inc.

83 Albe Drive / Suite C

Newark, DE 19702

www.versitron.com

1 www.versitron.com

PROPRIETARY DATA

All data in this manual is proprietary and may not be disclosed,

used or duplicated, for procurement or manufacturing purposes,

without prior written permission by

VERSITRON, Inc

.

WARRANTY

All VERSITRON products are warranted against defects in materials and workmanship for one year from date of
delivery. We will repair or, at our option, replace parts, which during normal usage prove to be defective during the
warranty period provided that:

1. You call VERSITRON at [phone] or [phone] and obtain a Return Maintenance Authorization (RMA)
Number. Please reference your RMA number on the outside of the shipping box.

2. Shipping charges are pre-paid.

No other warranty is expressed or implied and we are not liable for consequential damages. For repairs outside of the
warranty period, the same procedure must be followed.

2 www.versitron.com

TABLE OF CONTENTS

SECTION 1: GENERAL DESCRIPTION

INTRODUCTION…………………………………………………………………….4
DESCRIPTION OF EQUIPMENT…………………………………………………...4

FUNCTIONAL CHARACTERISTICS……………………………………………....5

PHYSICAL CHARACTERISTICS……………………………………………..........5

SPECIFICATIONS…………………………………………………………..........5-6

SECTION 2: INSTALLATION

INSTALLATION PROCEDURE……………………………………………………7
SYSTEM DIP SWITCH SETTINGS………………………………………………..8

SYSTEM TERMINAL BLOCK CONNECTIONS……………................................8

INDICATOR LEDs………………………………………………………………….9

TRANSMITTER AND RECEIVER…………………………………………………9

SECTION 3: TROUBLESHOOTING

OPTICAL FIBER………………………………………………………………….10

GENERAL……………………………………………………………………........10

DATA LINK……………………………………………………………………….10

LIST OF ILLUSTRATIONS

FIGURE 1: FVT1103 and FVR1103……………………………………………….5

FIGURE 2: PSACV1 Power Supply………………………………………………..7

FIGURE 3: VCA1100 Data Cable………………………………………………….7

3 www.versitron.com

SECTION 1

GENERAL DESCRIPTION

INTRODUCTION

This manual provides information on the installation and operation of the VersiVision
FVT1100/FVR1100 Series Fiber Optic Video Modems. Section 1 contains a general description of the
equipment. Section 2 contains installation instructions. Section 3 contains maintenance and
troubleshooting information.

Model

Number

FVT1103

FVT1104

FVT1105

FVR1103

FVR1104

FVR1105

Transmitter; 1-channel simplex video + 1-channel return data;

Multimode; ST; 3km standalone

Transmitter; 1-channel simplex video + 1-channel return data;

Multimode; SC; 3km standalone

Transmitter; 1-channel simplex video + 1-channel return data;

Singlemode; SC; 30km standalone

Receiver; 1-channel simplex video + 1-channel return data;

Multimode; ST; 3km standalone

Receiver; 1-channel simplex video + 1-channel return data;

Multimode; SC; 3km standalone

Receiver; 1-channel simplex video + 1-channel return data;

Singlemode; SC; 30km standalone

Description

FVR1103M

FVR1104M

FVR1105M

Receiver module; 1-channel simplex video + 1-channel return data;

Multimode; ST; 3km; installed in Model FVC14 chassis

Receiver module; 1-channel simplex video + 1-channel return data;

Multimode; SC; 3km; installed in Model FVC14 chassis

Receiver module; 1-channel simplex video + 1-channel return data;

Singlemode; SC; 30km; installed in Model FVC14 chassis

DESCRIPTION OF EQUIPMENT

Functional Characteristics

The VersiVision FVT1100 and FVR1100 Series Fiber Optic Video Modems are used to extend a
frequency modulation (FM) video signal and return data over a single

fiber optic cable. These modems
provide high quality transmission of one channel simplex video and one channel return data at distances to
3km using multimode fiber and distances to 30km using singlemode fiber. A BNC connector provides the
copper interface for the video input/output and a DB9 connector provides the copper interface for the data
input/output. RS-422, RS-485, and RS-232 data interfaces are supported. ST and SC optical connectors
are standard for the fiber optic interface. The FVT1100 and FVR1100 video modems are completely
compatible with NTSC, PAL, or SECAM video standards.

4 www.versitron.com