Versitron S7085x Installation Manual
S7085x
8-Port 10/100
Fast Ethernet Switch
Installation Guide
Copyright January 2003
VERSITRON, Inc.
83 Albe Drive / Suite C
Newark, DE 19702
www.versitron.com
The information contained in this document is subject to change without prior notice. Copyright ©. All
rights reserved.
TRADEMARKS
Ethernet is a registered trademark of Xerox Corp.
Warning
This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and if not installed and used in accordance with the instruction
manual may cause harmful interference to radio communications. However, there is not guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment on and off, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
•
connected.
Consult the dealer or an experienced radio technician for help.
Notice: The changes or modifications not expressly approved by the party responsible for compliance
could void the user authority to operate the equipment.
CISPR 22 CLASS B
This device complies with EMC directive of the European Community and meets or exceeds the
following technical standard:
EN 55022 - Limits and Methods of Measurement of Radio Interference Characteristics of Information
Technology Equipment. This device complies with CISPR 22 Class B.
CE NOTICE
Marking by the symbol indicates compliance of this equipment to the EMC directive of the
European Community. Such marking is indicative that this equipment meets or exceeds the following
technical standards:
EN 55022/CISPR 22 Class B
EN 55024 – EN61000-3-2, EN61000-3-3, EN61000-4 series
2
www.versitron.com
Table of Contents
1. Introduction........................................................................ 4
1.1 Features........................................................................................5
1.2 Specifications...............................................................................6
2. Installing the Switch........................................................... 8
2.1 Unpacking....................................................................................8
2.2 Checking AC Power ....................................................................8
2.3 Installing the Switch ....................................................................9
3. Making Network Connections .......................................... 10
3.1 Switched Ports .............................................................................10
3.2 Making UTP Connections ...........................................................10
3.3 Making Fiber Connection............................................................11
4. LED Indicators................................................................... 12
4.1 LED Panel....................................................................................12
4.2 Interpretation................................................................................12
3
www.versitron.com
1. Introduction
This 8-port Fast Ethernet switch series provides seven 10/100 TP ports and one 100BaseFX fiber
port, each capable of transmitting or receiving information simultaneously at full wire speed to
control and allocate the network bandwidth.
The key features of this switch unit are:
.
Optimized Bandwidth: Combining eight 10/100Mbps-based Fast Ethernet switched ports, the
switch delivers a high network bandwidth for your Fast Ethernet network.
.
Easy Migration: With 10BaseT support on each 10/100 port, the switch provides a non-
disruptive and smooth migration path from Ethernet to a Fast Ethernet network.
.
Fiber Uplink Support: With 100BaseFX port, the switch provides connectivity to a Fast
Ethernet network via fiber cable.
.
Easy Installation: With the functions of auto-speed-sensing and auto-negotiation on each port,
the switch supports plug-and-play installation which eliminates configuration problems.
4
www.versitron.com
Loading...