Verpan Flying Chair Assembly Instructions Manual

ASSEMBLY

INSTRUCTION

Flying Chair.

Verner Panton (1964)

Please read assembly thoroughly before assembly.

The assembly and installation should be carried out by a qualied person due to the fact that wrong assembly can
lead to the furniture falling and resulting in personal injury or damage.

NB! Screws or ttings for mounting the Flying Chair are not included due to different demands depending on ceiling
type. The tting and mounting point shall withstand a load of at least 500 kg. Use screws and ttings appropriate for
the ceiling material. Please ask an expert/specialised retailer for guidance according to specic project.

Approx. 2,4 m
If oor-to-ceiling-hight is higher, you
will need to add a custom extension

construction (not included).

1. place the top ring in a properly
mounted hook (not included) in

the ceiling.

Recommended seat hanging height 40-50 cm

2 . Hook each rope to the seat
brackets. Make sure the buckles

are securely closed.