Verona VEECT212FSS Installation Manual

IMPORTANT - PLEASE READ AND FOLLOW
Before beginning, please read these instructions completely and carefully.Do not remove permanently affixed labels, warnings, or plates from the product. This
may void the warranty.
Please observe all local and national codes and ordinances.Please ensure that this product is properly grounded.The installer should leave these instructions with the consumer who should retain
The electrical connection should always be accessible
Electrical installation must be in accordance with the National Electrical Code, ANIS/NFPA70 - latest edition and/or local codes. IN CANADA: Electrical installation must be in accordance with the current CSA C22.1 Canadian Electrical Codes Part 1 and/or local codes.
BUILT-IN CERAMIC COOKTOP
• USERS OPERATING INSTRUCTIONS
• INSTALLATION ADVICE
Model VEECT212F..
2
Dear Customer,
Thank you for having purchased and given your preference to our
product.
The safety precautions and recommendations reported below are for your own safety and that of others. They will also provide a means by which to make full use of the features offered by your appliance.
Please preserve this booklet carefully. It may be useful in future, either to yourself or to others in the event that doubts should arise relating to its operation.
This appliance must be used only for the task it has explicitly been designed for, that is for cooking foodstuffs. Any other form of usage is to be considered as inappropriate and therefore dangerous.
The manufacturer declines all responsibility in the event of damage caused by improper, incorrect or illogical use of the appliance.
3
IMPORTANT PRECAUTIONS AND RECOMMENDATIONS
After having unpacked the appliance, check to ensure that it is not damaged. If you have any doubts, do not use it and consult your supplier or a professionally qualified technician.
Packing elements (i.e. plastic bags, polystyrene foam, nails, packing straps, etc.) should not be left around within easy reach of children, as these may cause serious injuries.
The packaging material is recyclable and is marked with the recycling symbol .
Do not attempt to modify the technical characteristics of the appliance as this may become dangerous to use.
The manufacturer cannot be considered responsible for damage caused by unreasonable, incorrect or rash use of the appliance.
If you should decide not to use this appliance any longer (or decide to substitute an older model), before disposing of it, it is recommended that it be made inoperative in an appropriate manner in accordance to health and environmental protection regulations, ensuring in particular that all potentially hazardous parts be made harmless, especially in relation to children who could play with old appliances.
The appliance should be installed and all the electrical connections made by a qualified engineer in compliance with local regulations in force and following the manufacturer's instructions
TIPS FOR THE USER
During and after use of the cooktop, certain parts will become very hot. Do not
touch hot parts.
Keep children away from the cooking hob when it is in use.Before any cleaning or maintenance, switch off the electricity to the cooktop.
Risk of fire!
Do not leave inflammable material on the cooktop.Make sure that the electrical cables of other appliances installed nearby cannot
come into contact with the cooktop.
Never cook the food directly on the vitroceramic surface, but in special pans or
containers.
IMPORTANT PRECAUTIONS AND RECOMMENDATIONS FOR USE OF ELECTRICAL APPLIANCES
Use of any electrical appliance implies the necessity to follow a series of fundamental rules. In particular:
Never touch the appliance with wet hands or feet;Do not operate the appliance barefooted;Do not allow children or disabled people to use the appliance without your
supervision.
The manufacturer cannot be held responsible for any damages caused by improper, incorrect or unreasonable use of the appliance.
USER INSTRUCTIONS
4
VITROCERAMIC HOB (Fig. 1.1)
Electrical insulation Class I
COOKING POINTS
1. Zone Ø 145 - 1200 W
2. Zone Ø 180 - 1700 W
CONTROL PANEL DESCRIPTION
3. Rear zone control knob
4. Front zone control knob
5. Rear zone residual heat indicator
6. Front zone residual heat indicator
7. Power indicator light
features
SCHOTT
1
3
4
5
67
8
9
11
10 10
12
OFF
2
1
3
4
5
67
8
9
11
12
OFF
2
Fig. 1.1
3
5 7 6
4
1
2
Loading...
+ 8 hidden pages