
igilant II Coal Stove
V
Model • 2310
Enjoy the Warmth and Comfort of Coal
For steady, low maintenance, high-output heat, nothing compares to a coal stove by Vermont Castings®. Weʼve created a stove that
can heat up to 2,000 square feet for up to 18 hours on a single load. Thereʼs even an automatic thermostat to ensure steady heat
flow to your home. Classic style and modern convenience – a Vermont Castings exclusive.
1
This value can vary depending on how the unit is operated, and the type and moisture content of the fuel used. Figure shown is based on maximum fuel consumption obtained
under laboratory conditions and on average efficiencies.
2
These values are based on operation in building code-conforming homes under typical winter climate conditions in New England. If your home is of non-standard construction
(e.g., usually well-insulated, not insulated, built underground, etc.) or if you live in a more severe or more temperate climate, these figures may not apply. Since so many
variables affect performance, consult your Vermont Castings Authorized Dealer to determine realistic expectations for your home.
Features and Benefits
Standard Features:
• “Whole house” heater - up to
2,000 sq. ft.
• Clean and convenient top loading
• Special “shaker” grate system for
easy operation
• Large swing-out ash pan on the cover
• Automatic thermostat for steady heat
• Durable cast-iron construction
• Up to 18 hours on a single load
of anthracite
• For burning coal only. No other solid
fuel should be used (except for starting
the fire)
• Available in Classic Black only
Optional Features:
• Warming shelves
• Clearance reducing heat shields
• Height reducing short legs
• Outside air adaptor
YOU R DE ALE R
Specifications:
• Coal type - Anthracite or Bituminous
(Class B)
• Coal size - Pea or Nut (Anthracite)
• Maximum heat output - 50,000 BTUs/hr
• Maximum area heated - 2,000 ft.
• Fuel capacity - 45lbs (20 kg)
• Fuel loading - top
• Glass panel - Hi-temperature ceramic
• Weight - 425lbs (212 kg)
• Flue exit position - Top or rear
• Flue exit size - 6” Round Standard
8” Oval Optional
1
2
© 2008 CFM Corporation - All rights reserved. Vermont Castings®is a registered trademark of CFM Corporation.
In the interest of constant product improvements, we reserve the right to change specifications without notice.
Before installations, please read Installation Instructions and check all local Building Codes and Gas Regulations.
Please see your Dealer or visit www.vermontcastings.com for complete warranty information.
HC021-1000-9107
Printed in Canada