Vermona VSR-3 User Manual

2ZQHU¶V0DQXDO

VSR-3

YLQWDJHVSULQJUHYHUE

Foreword

More than 70 years ago spring reverb systems were used to bring the
natural reverberations of cathedrals into the homes of Hammond organ
players. Over the years they got smaller and more reliable and became what
we know today as spring tanks.

Nowadays reverbs were simulated more accurate and natural with the help
of digital technology and software. Despite, or maybe because of this, the
typical spring reverb sound with all its rough edges and flaws is highly
requested.

The VSR-3 vintage spring reverb creates this classic sound - not by
simulation but by using real springs combined with modern low-noise
circuitry.

We are proud to welcome you as VERMONA VSR-3 user and hope that you
will enjoy to use it during music production and performances.

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions. Alway include these instructions when passing
the product on to third parties.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Only clean the product when it is not connected to the mains power
supply. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched, particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use

- 2 -

caution when moving the cart/apparatus combination to avoid injury
from tip-over.

13. Unplug this apparatus during lightning storms or when unused for
long periods of time.

14. Refer all servicing to qualified service personnel.Servicing is required
when the apparatus has been damaged in any way, such as power
supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, when the apparatus has been exposed
to rain or moisture, does not operate normally, or has been dropped.

15. To completely disconnect this apparatus from the AC mains,
disconnect the power supply cord plug from the AC receptacle.

16. WARNING: To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture.

17. Do not expose this equipment to dripping or splashing and ensure
that no objects filled with liquids, such as vases, are placed on the
equipment.

18. The mains plug of the power supply cord shall remain readily
accessible.

Installation

• Ensure that the room in which you use this product is wired in accordance

with the local electrical code and checked by a qualified inspector.

• Only use this product indoors.

• Do not install the product in hot, humid, or excessively dusty locations, in

direct sunlight or in locations where it is exposed to externally generated
vibrations.

• Do not place burning objects (e.g. candles) on top of or near the product.

• If condensation has formed on the product, e.g. because it was moved

from a cold environment to a warm one, allow the product to acclimatize
to room temperature before using it.

• Do not overload wall outlets and extension cables as this may result in

fire and electric shock.

Owner's Manual VERMONA VSR-3 - vintage spring reverb

- 3 -