VeriWave, Inc. WaveDeploy WiFi(WF1101)/Ethernet(EF1101) Users Guide
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE
SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND
RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED
WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL
RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET
FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE
INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE
LICENSE OR LIMITED WARRANTY, CONTACT YOUR VERIWAVE REPRESENTATIVE FOR A COPY.
The following information is for FCC compliance of Class A devices: This equipment has been tested and found to
comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio-frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in which case users will be required to correct
the interference at their own expense.
Modifying the equipment without VeriWave written authorization may result in the equipment no longer complying
with FCC requirements for Class A digital devices. In that event, your right to use the equipment may be limited by
FCC regulations, and you may be required to correct any interference to radio or television communications at your
own expense. Modifications not expressly approved by VeriWave could void the user’s authority to operate the
equipment under FCC rules.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the device.
To reduce potential radio interference to other users, only the antenna provided from Veriwave may be used so that
the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF
THESE SUPPLIERS ARE PROVIDED “AS IS” WITH ALL FAULTS. VERIWAVE AND THE ABOVE-NAMED
SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT
LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL VERIWAVE OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL,
CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS
OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL,
EVEN IF VERIWAVE OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
VeriWave, Inc. WaveDeploy WiFi(WF1101)/Ethernet(EF1101) Users Guide
Table of Contents
TABLE OF CONTENTS ............................................................................................................................................ 3
1.4 RELATED PUBLICATIONS .................................................................................................................................. 5
4.3 COMMON REAR PANEL DISPLAY AND CONNECTORS ...................................................................................... 12
4.4 WAVEDEPLOY WIFI FRONT PANEL DISPLAY AND CONNECTORS ................................................................... 13
4.5 WAVEDEPLOY ETHERNET FRONT PANEL DISPLAY AND CONNECTORS .......................................................... 14
5.0 HOW TO SETUP ............................................................................................................................................. 15
6.3 POWER CHARACTERISTICS ............................................................................................................................. 22
VeriWave, Inc. WaveDeploy WiFi(WF1101)/Ethernet(EF1101) Users Guide
1.0 PREFACE
1.1 Audience
This guide is for the network or computer technician responsible for installation and or monitoring
of the VeriWave WaveDeploy WF1101 and EF1101 devices. We assume that you are familiar with
the concepts and terminology of Ethernet, WiFi and local area networking.
1.2 Purpose
The VeriWave WaveDeploy WiFi (WF1101) / Ethernet(EF1101) Users Guide documents the
hardware features of the VeriWave WaveDeploy WF1101 and EF1101 test units. It describes the
physical and performance characteristics of the WaveDeploy WF1101/EF1101 units, explains how
to install WaveDeploy WF1101/EF1101 units and provides troubleshooting information as well as
the hardware specification for the WaveDeploy WF1101/EF1101 units.
1.3 Conventions
This guide uses the following conventions to convey instructions and information:
Command descriptions use these conventions:
Commands and keywords are in boldface. Arguments for which you supply values are in italic.
Examples use these conventions:
Terminal, GUI and system displays are in screen font. Information you enter is in boldface screen font. Nonprinting characters, such as passwords or tabs, are in angle brackets (< >).
Notes, tips, help, cautions and warnings use the following conventions and symbols:
Means that the reader should take note. Notes contain helpful suggestions or reference to
materials not contained in this manual.
Means the following information will help you solve a problem. The tips information
might not be troubleshooting or even an action, but could be useful information.
Indicates where you might find further help or support. The information may be
located outside of this document.
Means that the reader should be careful. In this situation, you might do something
that could result in equipment damage or loss of data.
This warning symbol means danger. You are in a situation that could cause bodily
injury. Before you work on any equipment, be aware of the hazards involved with
electrical circuitry and be familiar with standard practices for preventing accidents.
The documentation must be consulted in all cases where this symbol is marked.
Page 4 of 26
VeriWave, Inc. WaveDeploy WiFi(WF1101)/Ethernet(EF1101) Users Guide
1.4Related Publications
All VeriWave WaveDeploy documentation can be found at:
http://www.WaveDeploy.com
Requirements and procedures for initial configurations and software upgrades tend to
change and therefore appear only in the release notes. Before installing, configuring or
upgrading the VeriWave WaveDeploy WF1101 or EF1101 units refer to the release notes on
WaveDeploy.com for the latest information.
1.5 Obtaining Technical Assistance
VeriWave provides WaveDeploy.com as a starting point for all technical assistance. Customers and
partners can obtain documentation, troubleshooting tips, and sample configuration from online tools.
For WaveDeploy.com registered users, additional troubleshooting tools are available from the
VTAC(Veriwave Technical Assistance Center). In addition you can resolve technical issues with
online technical support, download and test software packages and order VeriWave learning
material and merchandise.
To access WaveDeploy.com, go to the following website:
http://www.WaveDeploy.com
In addition to WaveDeploy.com, VeriWave.com is the foundation of a suite of interactive services
that provide immediate open access to VeriWave information and resources at anytime from
anywhere in the world. VeriWave.com provides a broad range of features and services to help
customers and partners streamline business processes and improve productivity. Through
VeriWave.com you can find information about VeriWave and our network test solutions, services
and programs.
To access VeriWave.com, go to the following website:
http://www.VeriWave.com
1.6 VeriWave Technical Assistance Center
The VeriWave TAC (VTAC) is available to all customers who need technical assistance with a
VeriWave product or technology that is under warranty or covered by a maintenance contract.
The solution to many problems can be found at www.wavedeploy.com. VeriWave strongly
recommends that you consult this resource first as it will usually provide the fastest means to answer
any questions.
Page 5 of 26
VeriWave, Inc. WaveDeploy WiFi(WF1101)/Ethernet(EF1101) Users Guide
VTAC technical assistance can be reached at:
Email: support@veriwave.com
Phone: 503-473-8341 or 1-800-457-5919
Technical support hours are from 8:30AM Pacific Time to 5:30PM Pacific Time.
For the quickest service, have the following information on hand when placing your call. If
requesting help by email please include the following information:
Your company’s name A contact person’s name, phone number and email address. A detailed description of the problem, including the point in the test when the problem
occurred. The complete text of the error message, including the error name and number if
available.
The version number of both the software and hardware used. To obtain this information,
click on the About on the Help menu of the application.
A screen shot of the user interface if the problem leaves it in an unusual state.
To make a screen shot of an error message or a user interface element, simultaneously press the
Alt key and the Print Screen key. Paste the captured image into a document by moving the
cursor into the document and simultaneously pressing the Ctrl key and the V key.
Page 6 of 26
VeriWave, Inc. WaveDeploy WiFi(WF1101)/Ethernet(EF1101) Users Guide
Item
Included /
Optional
Description
WaveDeploy Ethernet
(EF1101)
Included
WaveDeploy Ethernet (EF1101)based test point hardware
unit
Ethernet Cable
(VW85-0001-2000)
Included
(2 each)
Cat 5e Ethernet cable, terminated with shielded RJ45
connectors to connect the WaveDeploy unit to the
network and or test port.
USB Cable
(VW85-1001-0000)
Included
Standard USB cable to hook the WaveDeploy unit to a
host PC.
Users Guide
(VW02-2022-00)
Included
This guide.
Power Supply
(VW79-0022-0012)
Included
WaveDeploy unit AC to DC power supply.
Use of any other power supply not specified by
VeriWave will void all warranties.
Power cord
(VW85-0547-0000) US
Included
Specific power cord for your region.
Certificate of Calibration
(VW01-0022-00)
Included
WaveDeploy calibration certificate.
Battery
Optional
Battery pack to power WaveDeploy unit.
2.0 UNPACKING AND TAKING INVENTORY
2.1 Inventory
Please take the time to inventory your WaveDeploy product shipment. Table 1 shows all the
possible WaveDeploy EF1101 components. Table 2 shows all the possible WaveDeploy
WF1101 components. Depending on your order, you may not receive all the optional
components listed in the tables.
Table 1 WaveDeploy EF1101 Components
Page 7 of 26
VeriWave, Inc. WaveDeploy WiFi(WF1101)/Ethernet(EF1101) Users Guide
Item
Included /
Optional
Description
WaveDeploy WiFi
(WF1101)
Included
WaveDeploy WiFi (WF1101) based test point hardware
unit
Ethernet Cable
(VW85-0001-2000)
Included
(1 each)
Cat 5e Ethernet cable, terminated with shielded RJ45
connectors to connect the WaveDeploy unit to the
network.
USB Cable
(VW85-1001-0000)
Included
Standard USB cable to hook the WaveDeploy unit to a
host PC.
Antenna
(VW81-0614-2001)
Included
Reverse SMA 2.4/5GHz antenna1.
Use of any other antenna not specified by
VeriWave will void all warranties.
Users Guide
(VW02-2022-00)
Included
This guide.
Power Supply
(VW79-0022-0012)
Included
WaveDeploy unit AC to DC power supply.
Use of any other power supply not specified by
VeriWave will void all warranties.
Power cord
(VW85-0547-0000) US
Included
Specific power cord for your region.
Certificate of Calibration
(VW01-0022-00)
Included
WaveDeploy calibration certificate.
Battery
Optional
Battery pack to power WaveDeploy unit.
Table 2 WaveDeploy WF1101 Components
1.
Note: This device has been designed to operate with the antennas listed above which has a
maximum gain of 2.6 dB. Antennas not included in the above list or having a gain greater that
2.6 dB are strictly prohibited for use with this device.
Page 8 of 26
Loading...
+ 18 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.