Veris Industries VMD1B-C SERIES, VMD1B-F SERIES Data Sheet

Relays | Socket SPDT Relays

VMD1B-C & VMD1B-F SERIES

Socket Relays in a Wide Range of Coil Voltages

VMD1B- F

VBD1B- F

VBD1B- C

The Veris VMD1B-C Series are SPDT blade-style relays for socket/DIN mounting. The DIN-rail compatible VBD1B-C sockets feature finger-safe terminals in a slim, attractive design.

The Veris VMD1B-F Series are full-featured SPDT blade style relays for socket/DIN mounting. The VMD1B-F Series are equipped with an LED for coil proof, a flag for contact proof, an override lever, and a push-to-test button for momentary contact control. The VMD1B-F allows for instant and conclusive troubleshooting. Never wonder if the relay, control system, or wiring is the cause of a problem. The DIN-rail-compatible VBD1B-F sockets feature a slim design with finger-safe terminals and a removable hold-down clip. Never struggle with wire clips again.

VMD1B- C

Color-coded pushbutton

Allows manual operation of relay, AC coils red or DC coils blue (-F Series only)

LED status lamp

Shows coil “ON” or “OFF” status (-F Series only)

2-way mounting

Side or DIN rail mounting system…retrofits existing panel mounting and 35 mm DIN rail

TYPICAL COIL PERFORMANCE

AC Coils 0.9 VA

DC Coils 0.7 VA

CONTACT RATINGS

Standard (F & C Series)

Resistive 15 A @ 120 Vac

15 A @ 277 Vac

15 A @ 28 Vdc

Motor 1/3 @ 120 Vac

3/4 @ 277 Vac

Pilot Duty B300

Override lever

When activated, locks pushbutton and contacts in the powered position (-F Series only)

Flag indicator

Shows relay status in manual or powered condition (-F Series only)

Power Consumption

SPECIFICATIONS

Operating Temp. Range -40 to 55 °C (-40 to 131 °F)

Coil Operating Range 85% to 110% of rated voltage

Coil Drop-out Voltage Threshold

Expected Relay Life Electrical (@ rated current) 100,000 cycles;

Operating Time 20 msec typical

Dielectric Strength 1500 Vac RMS

WARRANTY

Limited Warranty 5 years

AGENCY APPROVALS

E198453

*The CE mark indicates RoHS2 compliance. Note: These relays are UL Listed when used with Veris sockets.

15% of rated voltage

Mechanical (unpowered) 10,000,000 cycles

HQ0001851.G 0117

Relays | VMD1B-C & VMD1B-F Series

VBD1B SOCKET

Wiring Diagram

Function

Coil (+)* Coil (-)* COMM N.O. N.C.

* NOTE: Observe polarity for relays with DC coil voltages only.

NEMA (IEC) Terminal

14 (A2) 13 (A1) 9 (11) 5 (14) 1 (12)

TOP VIEW

5(14)

1(12)

14(A2)

9(11)

13(A1)

VMD1B SOCKET

Dimensional Drawing

0.7"

(18 mm)

VM D1B REL AYS

Dimensional Drawing

0.8"

(20 mm)

2.7"

(69 mm)

0.2"

(5 mm)

Hold Down Clip included with F Model socket

1.1"

(28 mm)

1.4”

(36 mm)

1.1”

(28 mm)

ORDERING INFORMATION

MODEL RELAY TYPE AMPERAGE RATING CO I L V OLT AG E MIN. SWITCHING CURRENT FULL FEATURED UL CE

VM D1B- C12D

VMD1B-C24D 15 A 24 Vdc 100 mA@5 Vdc

VMD1B-C24A 15 A 24 Vac 100 mA@5 Vdc

VM D1B- C120A 15 A 120 Va c 100 mA@5 Vdc

VM D1B- F12D 15 A 12 Vdc 100 mA@5 Vdc

VMD1B-F 24D 15 A 24 Vdc 100 mA@5 Vdc

VMD1B-F24A 15 A 24 Vac 100 mA@5 Vdc

VM D1B- F120A 15 A 120 Va c 100 mA@5 Vdc

VMD1B-F 24 0A 15 A 240 Vac 100 mA@5 Vdc

SPDT

15 A 12 Vdc 100 mA@5 Vdc

• • •

0.6”

(15 mm)

• •

SOCKET ORDERING INFORMATION

MODEL AMPERAGE RATING VOLTAGE RATING FINGE R SAFE HO LD DOWN C LIP UL CE

VBD1B-C

VBD1B-F

When relays and sockets are used together, amperage rating is the lesser of the two ratings.

HQ0001851.G 0117

15 A 300 V

• • •

• • • •