Temperature Monitoring | Flush Mount Temperature Sensors
TP SERIES
Durable Device for Temperature Monitoring
TP
TP Series flush mounted temperature sensors are designed to monitor
the temperature of the air in areas where sensor durability and security
are needed. They are ideal for spaces where moisture and water vapor
are concerns. The back of the TP is insulated to reduce interior wall
temperature influence. The TP is for indoor use only, and it is warranted
for a period of five years.
Moisture
resistant
Potted sensor element
Durable
Stainless steel construction
Easy installation
Mounts to standard duplex wall
mount box
Flexibile
Available with linitemp, RTD, or
thermistors…application exibility
Simple
maintenance
Easy to clean
SPECIFICATIONS
Wiring 22 AWG; 2-wire: RTD/Thermistor;
Housing Brushed 430 stainless steel
Operating Temperature -25 to 105 °C (-13 to 221 °F)*
WARRANTY
Limited Warranty 5 years
AGENCY APPROVALS
**
* For RTD and thermistor accuracies and ranges, see the thermistor table.
**The CE mark indicates RoHS2 compliance. Please refer to the CE Declaration of
Conformity for additional details.
3-wire: Linitemp
TM
HQ0003998.G 0117
WIRING DIAGRAM
Temperature Monitoring | TP Series
DIGITAL CONTROL
Thermistor/RTD
DIMENSIONAL DRAWING
2x Ø 0.175”
(5 mm)
4.5”
(115 mm)
(36 mm)
ORDERING INFORMATION
Sensor Type
TP
B = 100R Platinu m, RTD
C = 1k Platinum, RT D
D = 10k T2, Ther mistor
E = 2.2k, T hermistor
F = 3k, The rmistor
G = 10k CPC, The rmistor
H = 10k T3, Ther mistor
I = 1k Balco (Nickel -iron) RTD
J = 10k Dale, The rmistor
K = 10k w/11k shunt,Ther mistor
M = 20k NTC, T hermistor
N = 1800 ohm, Th ermistor
R = 10k US, Ther mistor
S = 10k 3A221, Thermis tor
T = 100k, Th ermistor
U = 20k “D”, Ther mistor
W = 10k T2 high acc uracy, Thermis tor
Y = 10k T3 high acc uracy, Thermist or
2.8”
(72 mm)
1.4”
Calibration
Certicate
0 = None
1 = 1-point ca l validation*
2 = 2-point c al validation*
Example:
TP W 5 1
* Not availa ble with W and Y high accuracy thermistors.
Back of TP steel plate
Orange
3.3”
(84 mm)
HQ0003998.G 0117
TM
Temperature Monitoring | Thermistor Table
THERMISTOR TABLE
Class Pt RTD Balco RTD THERMISTOR
Type 100 Ohm 1000 Ohm 1000 Ohm 10k Type 2 10k Type 3 10k Dale 10k “G” US 20k
Accuracy ±0.3°C ±0.3°C ±1% @70°C ±1.0°C ±0.2°C ±0.2°C ±0.2°C Consult
0.00385
curve
Temp.
Response*
PTC PTC PTC NTC NTC NTC NTC NTC
°C °F 100 Ohm 1000 Ohm 1000 Ohm 10k Type 2 10k Type 3 10k Dale 10k “G” US 20k NTC
-50 -58 80.30 6 803.06 740.46 692,700 454,910 672,30 0 441,200 1,267,600
-40 - 40 84.271 842.71 773.99 344,700 245,089 337,200 239,700 643,800
-30 -22 8 8.222 882.22 806.02 180,100 137,307 177,200 135,300 342,000
-20 -4 92.160 921.60 841.00 98,320 79,729 97,130 78,910 189,080
-10 14 96.086 960.86 877.46 55,79 0 47,843 55,34 0 47,540 108,380
0 32 100.000 1,000.00 913.66 32,770 29,588 32,6 60 29,4
10 50 103.903 1,039.03 952.25 19,930 18,813 19,900 18,780 39,440
20 68 107.794 1,077.94 991.82 12,500 12,272 12,490 12,260 24,920
25 77 109.735 1,097.35 1,013.50 10,000 10,000 10,00 0 10,000 20, 000
30 86 111.673 1,116.73 1,035.18 8,055 8,195 8,056 8,194 16,144
40 104 115.541 1,155.41 1,077.68 5,323 5,593 5,326 5,592 10,69 6
50 122 119.397 1,193.97 1,120.52 3,599 3,894 3,602 3,893 7,2 34
60 140 123.242 1,232.42 1,166.13 2,486 2,763 2,489 2,760 4,992
70 158 127.075 1,270.75 1,21
80 176 130.897 1,308.97 1,254.55 1,258 1,462 1,258 1,458 2,516
90 194 134.707 1,347.07 1,301.17 919 1,088 917 1,084 1,833
100 212 138.506 1,385.06 1,348.38 682 821 679 816.8 1,356
110 230 142.293 1,422.93 1,397.13 513 628 511 623.6 1,016
120 248 146.068 1,460.68 1,447.44 392 486 389 481.8 770
130 26 6 149.832 1,498.32 1,496.28 303 380 301 376.4 591
Sensor
Codes
0.00385
curve
-50/150°C 0/70°C -20/70°C 0/70°C Factory
STANDARD RTD AND THERMISTO R VALUES (Ohms Ω)
90 64,160
0.75 1,753 1,994 1,753 1,990 3,512
B C I D H J R M
Accessories | C Series
To compute Linitemp Temperature
mV rea din g/10 - 273.15 = Temperature in °C
HQ0003998.G 0117
HQ0001874.H 0117
TM
Loading...