Veris Industries PW SERIES Data Sheet

Pressure Monitoring | Wet Media Differential Pressure Transducer

PW SERIES

Jumper-Selectable Port Swap Feature

The PW Series wet pressure transducers incorporate microprocessor profiled sensors for exceptional accuracy and reliability. Easy to use and designed to provide exceptional installation savings, the PW Series is ideal for measuring pressure across pumps, filters, heat exchangers, compressors, and other non-corrosive wet media applications.

The jumper-selectable port swap feature eliminates costly replumbing when the high and low ports are improperly plumbed, allowing the jumper position to be changed from normal to swap.

SPECIFICATIONS

GENERAL

Input Power Class 2; 12 to 30 Vdc or 24 Vac nominal, 50/60 Hz

Max. Current Draw DC: 125 mA; AC: 280 mA

Output 3-wire transmitter; user selectable 4 to 20 mA

(clipped & capped)/0-5 V/0-10 V*

Surge Damping Electronic; 5-second averaging

Test Mode Overrides output to full-scale (20 mA, 5 V, 10 V)

Zero Adjust Pushbutton auto-zero & digital input (2-pos

terminal block)

Status Indication Dual-color LED:

Green = Normal, Green Blinking = Low > High, Red = Overrange, Red Blinking = Overpressure

Housing Material White powder-coated aluminum

Fittings psig: 1/8” NPT female thread, 17 to 4 PH

stainless; barg: 1/8” BSPT female thread, 17 to 4 PH stainless

PRESSURE RANGES (SELECTABLE)

0 to 50 psig (Gauge) 0 to 5/10/25/50 psid (Differential)

0 to 100 psig (Gauge) 0 to 10/20/50/100 psid (Differential)

0 to 250 psig (Gauge) 0 to 25/50/125/250 psid (Differential)

0 to 3.5 barg (Gauge) 0.35/0.7/1.75/3.5 bard (Differential)

0 to 7.0 barg (Gauge) 0.7/1.4/3.5/7.0 bard (Differential)

0 to 17.0 barg (Gauge) 1.7/3.4/8.5/17.0 bard (Differential)

SENSOR

Accuracy @ 25 °C** Range A, B, C: ±1% F.S.; Range D: ±2% F.S.***

Long Term Stability ±0.25% per year

Media Compatibility Media compatible with 17 to 4 PH stainless steel

Proof Pressure Max. 2x F.S. range

Burst Pressure Max. 5x F.S. range

Jumper-selectable

The jumper-selectable output switch for normal (4 to 20 mA) or reverse (20 to 4 mA) operation

Switch-selectable

Switch-selectable pressure ranges

…fewer models to order

and stock

provides application flexibility

Rugged

Rugged, die-cast enclosure provides NEMA 4 sealing

Zero calibration

Pushbutton and remote zero adjustment

…maintain accuracy

and reduce callbacks with automatic zero calibration

High stability

Jumper-controlled electronic surge dampening for high stability

APPLICATIONS

• Monitoring and controlling pump differential pressure

• Chiller/boiler differential pressure drop

Temperature Compensated Range

Media Temp Limits -20 to 85 °C (-4 to 185 °F); 0 to 90% RH

Product Operating Environment

WARRANTY

Limited Warranty 5 years

AGENCY APPROVALS

†

Available

*Minimum input voltage for 4 to 20 mA operation: 250 Ω loop (1 to 5 V) = 12 Vdc; 500 Ω loop (2 to 10 V) = 15 Vdc; Minimum input voltage for volt operation: 0 to 5 Vdc output = 12 Vdc; 0 to 10 Vdc output = 15 Vdc. **Accuracy combines linearity, hysteresis, and repeatability. *** FS is defined as full span of selected range in bi-directional mode. EMC Conformance - CE option: Low voltage directive 2014/35/EU; EMC directive 2014/30/EU. EMC Special Note: Connect this product to a DC distribution network or an AC/DC power adaptor with proper surge protec tion (EN 61000-6-1 specification requirements).

† The CE mark indicates RoHS2 compliance. Please refer to the CE Declaration of Conformity for additional details.

0 to 50 °C (32 to 122 °F); TC Zero <±1.5% of product F.S. per sensor ; TC Span<±1.5% of product F.S. per sensor, (2 sensors per unit)

non-condensing

-10 to 55 °C (14 to 130 °F); 0 to 90% RH non-condensing

• CW/HW system differential pressure

HQ0001831.G 0117

WIRING DIAGRAM

POWER SOURCE

12 to 30 Vdc/24 Vac

DIGITAL CONTROL

Analog Input

0-5 V/0-10 V

or 4 to 20 mA

Optional

Digital Output

DIMENSIONAL DRAWING

POWER SIGNAL

COM

WET DIFFERENTIAL PRESSURE

PW SERIES

REMOTE ZERO (Dry Contact)

2.2"

(57 mm)

(102 mm)

ZERO

Range

JP8

JP7

JP6

JP3

JP2 JP1

Bidirectional Operation

Input Conditions Result Outputs Read

HI PORT

100 psi 100 psi 50 psi 50 psi

0 psi

17.0 bar

8.5 bar

8.5 bar 0 bar

Model PW-03 PW-04 PW-05

Model PW-06 PW-07 PW-08

Analog Reverse/Normal

Port Swap/Normal

Bidirectional/Normal

Fast/Slow Surge Damping

5 V/10 V Output

mA/Volts Output

LO PORT

0 psi 50 psi 50 psi 100 psi 100 psi

0 bar

8.5 bar

17.0 bar

100 250

3.5

7.0

17.0

Pressure Monitoring | PW Series

Output is either mA or V

0.7

1.4

3.4

C 10 20 50

0.35

0.7

1.7

4-20mA 0-10V

20mA 16mA 12mA 8mA 4mA

Use the Range switch to

select F.S. diﬀereintial

pressure.

D 5

e.g. PW-04

10 25

e.g. PW-08

10V

7.5V 5V

2.5V 0V

10V

7.5V 5V

2.5V 0V

DP +100 psi +50 psi 0 psi

-50 psi

-100 psi

+17.0 bar +8.5 bar

0 bar

-8.5 bar

-17.0 bar

Range (psi)

B 25 50

125

Range (bar)

1.75

3.5

8.5

e.g. PW-04

e.g. PW-08

5.8"

LOW

HIGH

(147 mm)

ORDERING INFORMATION

Local Display

L = LCD Display X = No Display

Example:

XL 04 CPW

* Select operational range according to maximum gauge pressure, NOT differential

pressure.

Example: High gauge pressure=90 psig, Select 100 psig model (04). **Barg models use BSPT threads on sensor fittings ***Not available with barg units

HQ0001831.G 0117

NIST

N = NIST X = None

Operational Range*

03 = 0-50 psi g 04 = 0-100 psig 05 = 0-250 psig 06 = 0-3. 5 barg** 07 = 0-7.0 barg** 08 = 0-17 barg**

US or EU

S = Standard*** C = CE

MICROPROCESSOR PROVIDES DIGITAL SIGNAL CONDITIONING

• Noise rejection reduces fluctuating readings due to noise or turbulence

F.S.

Noise Rejection

PRESSURE

Actual Pressure Digitally Conditioned Output

• Surge damping prevents false alarms by averaging fast peaks

Output Clamping

Surge Damping

TIME