Veris Industries HX22 SERIES Data Sheet
SENSED AMPS
Selected Range*
0 Vdc
0 A
5 Vdc
SENSOR OUTPUT
*Factory calibrated ranges selected
with the amperage range switch
Minimize Installed Cost
Current Monitoring | Current Transducers:
0 to 5 Vdc Analog Output
HX22 SERIES
Load Trending with 0 to 5 Vdc Output
H722 LC
H822
TM
Maximize Reliability
H922
H622-xx
Self-powered
analog
Self-powered analog current
sensor simplifies installation
No external
power required
No external power required for
sensor
Retrofit
Self-gripping, split-core design for
fast retrofit installation…no need
to remove conductor (H622-xx,
H922)
New
construction
Economical solid-core models
feature adjustable bracket for
easy alignment (H722xC)
Factory
calibrated
Factory calibrated ranges
for increased flexibility and
resolution
No jumpers
No jumpers on unit…reduces
installation error
The Hawkeye 622-xx, 722, 822, and 922 provide accurate load
trending information with a proportional 0 to 5 Vdc output signal.
Slide-switches provide easy field selection of monitored amperage
range without jumpers (available on some models).
SPECIFICATIONS
Sensor Power Induced from monitored conductor
Insulation Class 600 Vac RMS (UL), 300 Vac RMS (CE1)
Frequency Range 50/60 Hz nominal
Temperature Range -15 to 60 °C (5 to 140 °F)
Humidity Range 10 to 90% RH non-condensing
Accuracy ±2% F.S. from 10% to 100% (range)
Response Time 2 sec.
Terminal Block Wire Size 24 to 14 AWG (0.2 to 2.1 mm2)
Terminal Block Torque 3.5 to 4.4 in-lbs (0.4 to 0.5 N-m)
WARRANTY
Limited Warranty 5 years
AGENCY APPROVALS
Agency Approvals
UL 508 open device listing; CE: EN61010-1, CAT III,
Pollution Degree 2, basic insulation
APPLICATIONS
• Load trending
• Motor control
• Positive proof of flow
EXAMPLE LINEAR OUTPUT
Scale software as shown
1. The CE mark indicates RoHS2 compliance. Please refer to the CE Declaration of
Conformity for additional details.
TM
HQ0001764.G 0117
Current Monitoring | Hx22 Series
H622-XX
Dimensional Drawing
Removable Mounting Bracket
0.6"
(16 mm)
2.1"
(54 mm)
0.4” x 0.2”
(10 mm x 5 mm)
Slot (2x)
H822/H822-20
Dimensional Drawing
Removable/Adjustable Mounting Bracket
0.7"
(18 mm)
0.5"
(13 mm)
(54 mm)
2.9"
(74 mm)
3.5"
(89 mm)
2.1"
0.7"
(18 mm)
1.2"
(31 mm)
0.9"
(23 mm)
2.5"
(64 mm)
1.0"
(26 mm)
2.8" *
(71 mm)
H722LC/H722HC
Dimensional Drawing
Removable/Adjustable Mounting Bracket
0.7"
(19 mm)
0.2” x 0.15”
slot (2x)
(68 mm)
4.2"
(106 mm)
H922
Dimensional Drawing
Removable Mounting Bracket
1.1”
(26 mm)
3.1”**
(79 mm)
2.8"
3.8"
(95 mm)
0.8”
(21 mm)
1.0”
(25 mm)
0.9"
(23 mm)
3.0" **
(75 mm)
1.1" *
(27 mm)
Bracket can
be mounted
on three sides
for added
installation
flexibility.
Self-gripping Iris
MONITORING FAN /PUMP MOTORS
FOR POSITIVE PROOF OF FLOW
Wiring Diagram
CONTACTOR
CONTROLLER
Analog
Input
0 to 5 Vdc
Fan or Pump
MOTOR
2.8”
(70 mm)
1.4”*
(36 mm)
0.4” x 0.2”
Slot (x2)
1.7
(43 mm)
1.1" *
(27 mm)
Ø 0.3”
(8 mm)
3.0”
(76 mm)
2.5”
(64 mm)
2.3"
* Terminal block may extend up to 1/8” over the height dimensions shown.
** Slide switch may extend up to 1/4” over the height dimensions shown.
ORDERING INFORMATION
MODEL
AMPE RAG E
RANGE
H622-10 0 to 10 A
H622-20 0 to 20 A Split-core • •
H722LC 0 to 10/20/40 A Solid-core • •
H722HC 0 to 50/100/200 A Solid-core • •
H822 0 to 10 A Solid-core • •
H822-20 0 to 20 A Solid-core • •
H922 0 to 30/60/120 A Split-core
H922030A 0 to 30 A Split-core
H922060A 0 to 60 A Split-core •
H922120A 0 to 120 A Split-core •
1. Listed for use on 75°C insulated conductors.
SENSOR
OUTPUT
0 to 5 Vdc
HOUSING UL CE
Split-core • •
1
•
•
•
LEAD
FREE
HQ0001764.G 0117
TM
Loading...