
Flow Monitoring | Electromagnetic (Mag) Meter
Flow Monitoring | Electromagnetic (Mag) Meter
ELECTROMAGNETIC SERIES
Measure Fluid Flow In Wastewater And Slurries
Electromagnetic Series
Electromagnetic (mag) flow meters are capable of measuring flow
in almost any liquid, slurry, or paste with a minimum of electrical
conductivity using Faraday’s law of induction. These meters are highly
accurate, at 0.25% or better, exceeding AWWA accuracy standards for
mechanical meters. The smart, micro-processor based electronics are
simple to operate, with AMR and SCADA ready standard outputs. The
NEMA 4X enclosure provides durability.
Reliable, durable
design
Open ow tube design…no head
loss, no moving parts to fail
0.25% accuracy
0.25% accuracy independent of fluid
viscosity, density, and temperature
Bi-directional
Bi-directional flow measurement
capability
inter-city billing
APPLICATIONS
• Monitoring flow in systems
…suitable for
likely to contain solids
Password
security
Protect against unwanted
program changes
Wide flow range
Exceeds operating characteristics
of turbine and propeller meters
Well & reclaimed
water
Works with most solids common
in liquid systems…great for
well water and reclaimed water
systems…not fouled by sand,
gravel, or debris
SPECIFICATIONS
Flow Range 0.1 to 39.4 fps (0.03 to 12 m/s)
Max. Operating Pressure 150 psi
Accuracy ±0.25% of rate for velocities greater than 1.64 fps
(0.50 m/s); ±0.004 fps (±0.001 m/s) for velocities
less than 1.64 fps (0.50 m/s)
Repeatability ±0.1%
Analog Outputs 4 to 20 mA, 0 to 20 mA, 0 to 10 mA, 2 to 10 mA
(programmable and scalable)
Voltage sourced 24 Vdc (isolated); max. loop
resistance < 800 Ω
Digital Outputs Four total, configurable 24 Vdc sourcing active out-
put (up to two), 100 mA total, 50 mA each; sinking
open collector output (up to four), 30 Vdc max.,
100 mA each; AC solid-state relay (up to two),
48 Vac, 500 mA max.
Pulse Outputs Scalable up to 10 kHz, passive open collector up to
10 kHz, active switched 24 Vdc. Up to two outputs
(forward and reverse) Pulse width programmable
from 1 to 1100 ms or 50% duty cycle
Flow Direction Unidirectional or bidirectional, two separate
totalizers (programmable)
Coil Power Pulsed DC
Minimum Conductivity 5.0 micromhos/cm
Electrode Materials Standard: alloy C; Optional: 316 stainless steel,
gold/platinum plated, tantalum, platinum/rhodium
Liner Material PFA up to 3/8”, PTFE 1/2” thru 24”, soft or hard
rubber from 1” thru 54”
NSF Listed Models with hard rubber liner 4” size and up;
Fluid Temperature With remote amplifier: PFA, PTFE, 155 °C (311 °F)
Pipe Spool Material 316 stainless steel
Meter Housing Material Carbon steel welded
Flanges Standard (ANSI B16.5 Class 150 RF): carbon steel;
Meter Enclosure
Classification
Junction Box Enclosure
Protection
Cable Entries ½” NPT cord grip
Optional Stainless Steel
Grounding
Ring Thickness
POWER SUPPLY
AC 85 to 265 Vac; typical power: 20 VA or 15 W;
DC (optional) 10 to 36 Vdc; Typical power: 10 W; max. power:
WARRANTY
Limited Warranty 2 years
Models with PTFE liner all sizes
With Meter Mounted Amplifier: Rubber 80 °C
(178 °F); PFA, PTFE 100 °C (212 °F)
Optional: 316 stainless steel
NEMA 4X (IP66); Optional: Submersible NEMA 6P
(remote amplifier required)
For remote amplifier option: powder coated
die-cast aluminum, NEMA 4 (IP65)
For meter sizes up to 10”: 0.135” thickness per ring;
For meter sizes above 10”: 0.187” thickness per ring
max. power: 26 VA or 20 W
14 W
TM
HQ0001786.H 0117

ELECTROMAGNETIC SERIES
Dimensional Drawings
7.1”
(180 mm)
7.1”
(180 mm)
1.1”
(27 mm)
3.3”
(88 mm)
Flow Monitoring | Electromagnetic Series
1.1”
(27 mm)
4.8”
(122 mm)
4.7”
(120 mm)
3.2”
(80 mm)
B
A
Meter with M2000 amplier Meter with junction box for remote M2000 amplier
Size A B C D
inch mm inch mm inch mm inch mm inch mm lb kg min max min max
1/4 6 6.7 170 14.0 356 3.5 89 11.4 288 10 4.5 0.063 20 0.02 5
5/16 8 6.7 170 14.0 356 3.5 89 11.4 288 10 4.5 0.114 34 0.03 9
3/8 10 6.7 170 14.0 356 3.5 89 11.4 288 10 4.5 0.177 53 0.05 14
1/2 15 6.7 170 14.0 356 3.5 89 11.4 288 10 4.5 0.416 125 0.11 33
3/4 20 6.7 170 14.2 361 3.9 99 11.5 293 13 5.5 0.75 225 0.2 59
1 25 8.9 225 14.4 366 4.3 108 11.7 298 18 8.0 1.20 350 0.3 93
1-1/4 32 8.9 225 15.2 386 4.6 117 12.5 318 20 9.0 2.00 575 0.5 152
1-1/2 40 8.9 225 15.4 390 5.0 127 12.7 322 21 9.5 3.00 900 0.8 239
2 50 8.9 225 15.9 403 6.0 152 13.2 335 26 11.5 4.70 1400 1 373
2-1/2 65 11.0 280 17.1 434 7.0 178 14.4 366 52 23.5 8 2400
3 80 11.0 280 17.3 440 7.5 191 14.7 372 54 24.5 12 3600
4 100 11.0 280 18.4 466 9.0 229 15.7 398 56 25.5 19 5600
5 125 15.8 400 19.6 498 10.0 254 16.9 430 58 26.0 30 8800
6 150 15.8 400 20.6 524 11.0 279 17.9 456 60 27.0 40 12700
8 200 15.8 400 22.5 572 13.5 343 20.4 518 86 39.0 75 22600
10 250 19.7 500 26.8 681 16.0 406 24.1 613 178 81.0 120 35300
12 300 19.7 500 28.9 734 19.0 483 26.2 666 207 94.0 170 50800
14 350 19.7 500 30.8 782 21.0 533 28.2 716 258 117 230 69200
16 400 23.6 590 33.7 856 23.5 597 31.0 788 306 139 300 90400
18 450 23.6 590 35.0 890 25.0 635 32.4 822 400 181 380 114000
20 500 23.6 590 38.2 969 27.5 699 35.5 901 493 224 470 140000
22 550 23.6 590 39.6 1005 29.5 749 36.9 937 523 237 570 170000
24
600 23.6 590 42.2 1071 32.0 813 39.5 1003 552 251 680 200000
28 700 23.6 590 46.2 1173 36.5 927 44.0 1118 648 294 920 275000
30 750 31.5 800 48.3 1228 39.0 984 45.7 1161 702 319 1060 315000
32 800 31.5 800 52.2 1325 41.4 1015 49.5 1257 768 349 1200 361000
36 900 31.5 800 55.3 1405 46.0 1168 54.1 1374 848 385 1500 457000
40 1000 31.5 800 60.0 1525 50.2 1230 57.4 1457 922 419 1900 565000
42 1050 36.0 914 66.0 1675 53.0 1346 63.4 1610 1198 499 2100 620000
48 1200 39.4 1000 69.9 1775 59.4 1455 67.2 1707 1208 549 2700 814000
54 1400 39.4 1000 78.5 1995 68.4 1675 75.9 1927 1362 619 3700 1100000
Ø C
Ø Size
D
Est. Weight with
M-2000
Flow Range
LPM GPM
2 631
3 956
5 1493
8 2334
11 3361
20 5975
30 9336
45 13444
60 18299
80 23901
100 30250
125 37346
150 45188
180 53778
240 73100
280 84000
320 95600
400 121000
500 149300
550 164600
720 215100
980 292700
ORDERING INFORMATION ON NEXT PAGE
HQ0001786.H 0117
TM