Veris Industries 250X SERIES Data Sheet

Flow Monitoring | Tee Meter, Brass

250X SERIES

For Pipe Sizes ½” To 1½” NPT

250BR0505-1211

Metal tee-style liquid flow sensor with cast brass housing fits ½” to 1½” NPT. These sensors are accurate, even at low flow rates. Use in conjunction with a flow monitor or transmitter for a complete flow monitoring system.

SPECIFICATIONS

Maximum Pressure At 38 °C (100 °F) 400 psi; at 105 °C (221 °F)

325 psi

Wetted Materials UHMW-PE bearing, polyamide impeller, tungsten-

carbide shaft, EPDM O-rings

Recommended Flow 0.3 to 15 ft/sec (0.09 to 4.5 m/sec)

Accuracy ±1.0% of rate

Repeatability ±0.7% over recommended design flow range*

Linearity ±0.7% over recommended design flow range*

Rangeability 60:1

Output Frequency 0.8 to 80 Hz

WARRANTY

Limited Warranty 1 year

2000 ft signal travel

Signal can travel up to 2000 ft (609 m) between the sensor and the display unit without the need for amplification

Ideal for low flow rates

Operation and repeatability even at low flow rates

Non-magnetic sensing

Six-bladed impeller design with a proprietary, non-magnetic sensing mechanism for high accuracy and repeatability. Forward-swept impeller is less prone to fouling by water-borne debris…reliable performance with minimal downtime.

APPLICATIONS

• Measuring liquid flow rates

No amplification

Signal can travel up to 2000 ft (609 m) between the sensor and the display unit without the need for amplification

Cable options

Supplied with 20 ft (6 m) of 2-conductor AWG 20 UL type PTLC cable (105 °C rated)

Highly durable

PPS electronics housing

* ≥10 upstream and ≥5 downstream straight pipe diameters, uninterrupted flow.

HQ0001781.F 0117

250x Series

APPLICATION DIAGRAM

Flow Monitoring | 250x Series

4 to 20 mA output

Fluid

Monitoring System

DIMENSIONAL DRAWING

Signal (-)

Signal (+)

Shield Ground

Power (4000 only)

4-20mA Loop(-)

4-20mA Loop(+)

Sensor Inputs

310 Flow Transmitter

Data Industrial

D.I.C.

Comm

Port

Frequency Signal

250BR Sensor, in line with ﬂuid pipe

Model

A B C

U001-

0008 4.0” (102 mm) 4.7” (120 mm) 1.7” (44 mm)

0009 4.0” (102 mm) 4.7” (120 mm) 1.7” (44 mm)

0010 5.5” (140 mm) 4.8” (121 mm) 2.2” (56 mm)

0011 6.1” (155 mm) 5.0” (127 mm) 2.4” (61 mm)

0012 6.5” (165 mm) 5.2” (132 mm) 2.7” (69 mm)

ORDERING INFORMATION

MODEL MANUF. PART # DESCRIPTION

U001-0008 250BR0505-1211 Flow, Sensor, 1/2” Cast Brass Tee

U001-0009 250B R0705-1211 Flow, Sensor, 3/4” Cast Brass Tee

U001-0010 250B R10 05 -1211 Flow, Sensor, 1” Cast Brass Tee

U001-0011 25 0BR1205-1211 Flow, Sensor, 1-1/4” Cast Brass Tee

U001-0012 250BR1505-1211 Flow, Sensor, 1-1/2” Cast Brass Tee

HQ0001781.F 0117