Veris Industries 225X SERIES, 226X SERIES Data Sheet

Flow Monitoring | 225x & 226x Series

225X & 226X SERIES

Permits Service While System is Pressurized

226SS0005-1211

226BR0005-1211

225BR0005-1211

Insert-style hot tap liquid flow sensors with brass or stainless steel
sleeves feature a ball or gate valve for pipe sizes 3” to 40” (77 to 1016
mm). These devices are designed for hot tap applications in pipes that
cannot be drained for service. The HTT tool is required for hot tap
installation. Use with a flow monitor or transmitter for a complete flow
monitoring system.

SPECIFICATIONS

Temperature Rating 105 °C (221 °F) continuous

Pressure Rating At 38° C (100 °F) 225BR: 300 psi; 226BR/226SS:

400 psi; At 105 °C (221 °F) 225BR: 210 psi;
226BR: 250 psi; 226SS: 300 psi

Wetted Materials UHMW-PE bearing, polyamide impeller, tung-

sten carbide shaft, EPDM O-rings

Accuracy ±1.0% of full scale over recommended design

flow range; ±4.0% of reading within calibration
range*

Repeatability ±0.3% of full scale over recommended design

flow range*

Linearity ±0.2% of full scale over recommended design

flow range*

Output Frequency 3.2 Hz to 200 Hz

Output Pulse Width 5 ms ±25%

WARRANTY

Limited Warranty 1 year

* ≥10 upstream and ≥5 downstream straight pipe diameters, uninterrupted flow.

2000 ft signal
travel

Signal can travel up to 2000 ft
(609 m) between the sensor and
the display unit without the need
for amplification

Non-magnetic
sensing

Six-bladed impeller design with
a proprietary, non-magnetic
sensing mechanism for high
accuracy and repeatability.
Forward-swept impeller is less
prone to fouling by water-borne
debris…reliable performance
with minimal downtime.

Cable options

Supplied with 20 ft (6 m) of
2-conductor AWG 20 UL type
PTLC cable (105 °C rated)

Hot tap design

Hot tap design for use in
applications where the pipe
cannot be drained for service
after installation…reduce
downtime for maintenance

APPLICATIONS

• Measuring liquid flow rates

DIMENSIONAL DRAWING

Isolation Valve

2” NPT

Min: 8.5” (216 mm)

17.5”

(445 mm)

Max: 11.5” (293 mm)

16.4”

(417 mm)

1.5” insertion depth
(39 mm)

ORDERING INFORMATION

MODEL MANUF. PART # DESCRIPTION

U001-0003 225BR0005-1211* Flow, Sensor, Hot Tap, Brass, Gate Valve

U001-0004 226BR0005-1211* Flow, Sensor, Hot Tap, Brass, Ball Valve

U001-0005 226SS0005-1211* Flow, Sensor, Hot Tap, SS, Ball Valve

U001-0071 HTT

Flow, Tool, HotTap, 200 Series,
Insert/Remove

HQ0001780.F 0117

TM