Veris Industries 220X SERIES, 228X SERIES Data Sheet

Flow Monitoring | Insertion Meter, Standard Impeller / Hot Tap

220X & 228X SERIES

For Pipe Sizes 3” To Over 40”

220SS0005-1211

220BR0005-1211

228CB2005-1211

Insert-style liquid flow sensors with brass or stainless steel sleeves

fit pipe sizes from 3” to 40” (77 to 1016 mm). These sensors can be
purchased with a bronze or iron tee. Sensor output is a frequency that
indicates flow rate. Used in conjunction with a compatible flow monitor
or transmitter, these non-magnetic flow sensors provide an accurate
reading of the rate of liquid flow, as well as total accumulated flow.

2000 ft signal
travel

Signal can travel up to 2000 ft
(609 m) between the sensor and
the display unit without the need
for amplification

Non-magnetic
sensing

Six-bladed impeller design with
a proprietary, non-magnetic
sensing mechanism for high
accuracy and repeatability.
Forward-swept impeller is less
prone to fouling by water-borne
debris…reliable performance
with minimal downtime.

DIMENSIONAL DRAWINGS

3”

(76 mm)

Cable options

Supplied with 20 ft (6 m) of
2-conductor AWG 20 UL type
PTLC cable (105 °C rated)

2” NPT

1.5”

(38 mm)

(insertion depth)

SPECIFICATIONS

Temperature Rating 105 °C (221 °F) continuous

Pressure Rating At 38 °C (100 °F) Insert: 400 psi; brass tee: 200 psi;

Recommended
Design Flow Range

Wetted Materials UHMW-PE bearing, polyamide impeller, tungsten

Accuracy 1% F.S. over recommended design flow range;

Repeatability ±0.3% of full scale over recommended design

Linearity ±0.2% of full scale over recommended design

Output Frequency 3.2 Hz to 200 Hz

Output Pulse Width 5 ms ±25%

WARRANTY

Limited Warranty 1 year

* ≥10 upstream and ≥5 downstream straight pipe diameters, uninterrupted flow.

iron tee: 175 psi

0.5 to 30 ft/sec (0.15 to 9 m/sec); initial detection
below 0.3 ft/sec

carbide shaft, EPDM O-rings

±4% of reading within calibration range*

flow range*

flow range*

1.75”

(45 mm)

Pipe I.D.

1/2 - 14 NPT

9”

(229 mm)

5.25”

(133 mm)

7.2”

(183 mm)

4.5”

(114 mm)

ORDERING INFORMATION

MODEL MANUF. PART # DESCRIPTION

U001-0001 220BR0005-1211

U001-0002 220SS0005-1211

U001-0006 228BR20 05-1211 Flow, Sensor, Insert, Brass, 2” Brass Tee

U001-0007 228CB2005-1211 Flow, Sensor, Insert, Brass, 2” Iron Tee

U001-0025 228BR2505-1211 Flow, Sensor, Insert, Brass, 2.5” Brass Tee

U001-0030 228CB2505-1211 Flow, Sensor, Insert, Brass, 2.5” Iron Tee

U001-0072 228BR20 04 -0 211 Flow, Sensor, Insert, Brass, 2”, Viton

Flow, Sensor, Insert, Brass Sleeve, 3” to 40”
(77 to 1016 mm) pipe

Flow, Sensor, Insert, SS Sleeve, 3” to 40”
(77 to 1016 mm) pipe

TM

HQ0001778.F 0117