Installation Guide
Temperature
• This product is not intended for life or safety applications.
• Do not install this product in hazardous or classied locations.
• Read and understand the instructions before installing
this product.
• Turn off all power supplying equipment before working on it.
• The installer is responsible for conformance to all applicable codes.
No responsibility is assumed by Veris Industries for any consequences arising out of the
use of this material.
NOTICE
TM
TO Series
Outdoor Temperature Sensor
Product Overview
The TO sensor has a weather-resistant housing suitable for monitoring outdoor temperature. The probe is protected
from solar heating to improve accuracy. The TO has standard resistive output compatible with building control
systems, and it is warranted for a period of ve years.
Product Identification
Sensor Type
TO
B = 100R platinum, RTD
C = 1k platinum, RTD
D = 10k T2, Thermistor
E = 2.2k, Thermistor
F = 3k, Thermistor
G = 10k CPC, Thermistor
H = 10k T3, Thermistor
I = 1k Balco (Nickel-iron) RTD
J = 10k Dale, Thermistor
K = 10k w/11k shunt, Thermistor
M = 20k NTC, Thermistor
N = 1800 ohm, Thermistor
R = 10k US, Thermistor
S = 10k 3A221, Thermistor
T = 100k, Thermistor
U = 20k “D”, Thermistor
W = 10k T2 high accuracy, Thermistor
Y = 10k T3 high accuracy, Thermistor
Z = 10k E1, Thermistor
CC = 15k, Thermistor
Output
RØ
= Resistive
Cal Certificate
0 = None
1 = 1 point Cal validation
2 = 2 point Cal validation
Specifications
Wiring
Housing
Approvals
Z205465-0D Page 1 of 2 ©2013 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@veris.com 08131
Alta Labs, E nercept, Ensp ector, Hawkeye, Trus tat, Aerospo nd, Veris, and th e Veris ‘V’ log o are tradema rks or registe red tradema rks of Veris Ind ustries, L. L.C. in the USA and /or other countri es.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
22 AWG; 2-wire RTD/T hermistor
Weatherproof
COMPLIANCE INFORMATION
CE
Installation Guide
4.7"
(118 mm)
4.0"
(112 mm)
0.9"
(22 mm)
2.7"
(69 mm)
Temperature
TOSeries
Dimensions
TM
Installation
1. Choose a monitoring location that is sheltered and out of direct sunlight (e.g. under eaves, north side of building, etc.).
2. Connect the wires as shown.
Thermistor
RTD
Orange
Orange
3. The sensor may be suspended from the conduit without damage to the unit. Do not obstruct the vent openings.
Z205465-0D Page 2 of 2 ©2013 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@veris.com 08131
Alta Labs, E nercept, Ensp ector, Hawkeye, Trus tat, Aerospo nd, Veris, and th e Veris ‘V’ log o are tradema rks or registe red tradema rks of Veris Ind ustries, L. L.C. in the USA and /or other countri es.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.