Veris TK Installation Instructions

Installation Guide

Temperature

• This product is not intended for life or safety applications.

• Do not install this product in hazardous or classied locations.

• Read and understand the instructions before installing this product.

• Turn oﬀ all power supplying equipment before working on it.

• The installer is responsible for conformance to all applicable codes.

No responsibility is assumed by Veris Industries for any consequences arising out of the

use of this material.

NOTICE

TK Series

Temperature Probe

Product Overview

TK ceiling mounted temperature sensors monitor the temperature of the air in a duct. The design includes a pre-calibrated sensor housed in a sturdy stainless steel probe with no junction box. The TK has a resistive output compatible with building control systems. It is warranted to meet accuracy specications for a period of ve years.

Product Identiﬁcation

B = 4 1/2" (115 mm) C = 6” (153 mm) D = 8" (204 mm) R = 14” (356 mm)

Sensor TypeProbe Length

B = 100R platinum, RTD C = 1k platinum, RTD D = 10k T2, Thermistor E = 2.2k, Thermistor F = 3k, Thermistor G = 10k CPC, Thermistor H = 10k T3, Thermistor I = 1k Balco (Nickel-iron) RTD J = 10k Dale, Thermistor K = 10k w/11k shunt, Thermistor M = 20k NTC, Thermistor N = 1800 ohm, Thermistor P = 10mV/°C, Linitemp R = 10k US, Thermistor S = 10k 3A221, Thermistor T = 100k, Thermistor U = 20k “D”, Thermistor CC = 15k, Thermistor

Output

= Resistive

Cal Certs

0 = None 1 = 1 Point Cal Cert 2 = 2 Point Cal Cert

Speciﬁcations

Wiring

Housing

Input Power

Output

Operating Temperature

Accuracy

Calibration Error

Error over Temperature

Increased cable length affects the readings of lower resistance RTDs (100R platinum RTD). Room temperature error is documented on each unit.

Alta Labs, E nercept, Ensp ector, Hawkeye, Trus tat, Aerospo nd, Veris, and th e Veris ‘V’ log o are tradema rks or registe red tradema rks of Veris Ind ustries, L. L.C. in the USA and /or other countri es.

Other companies’ trademarks are hereby acknowledged to belong to their respective owners.

22 AWG; 2-wire RTD/ Thermistor

Stainless Steel

LINITEM P OPTIO N

5- 30 VDC

1 µA / °C or 10 mV/ °C

-25° to 105°C (-13 to 221°F)

Range

1.5°C ( 35°F) typical; 2.5°C ( 37° F) max. at 25°C (77°F)

1.8°C ( 35°F) typical ; 3.0°C (3 4°F ) max. over 0 ° to 70°C (32 ° to 158° F) range;

2.0°C (35°F) t ypical; 3.5°C (38°F) max. over -25° to 105°C (-13° to 221°F) range

Installation Guide Temperature TK

Dimensions

Installation

0.3"

(6.3 mm)

1. Mount probe using the Veris AA64 or similar mounting clip.

2. Wire as shown below.

RTD

Orange

Thermistor

Length as ordered

Other companies’ trademarks are hereby acknowledged to belong to their respective owners.