Veris TI Installation Instructions

Installation Guide

Temperature

TID

TIW

NOTICE

• This product is not intended for life or safety applications.

• Do not install this product in hazardous or classied locations.

• Read and understand the instructions before installing this product.

• Turn oﬀ all power supplying equipment before working on it.

• The installer is responsible for conformance to all applicable codes.

No responsibility is assumed by Veris Industries for any consequences arising out of the

use of this material.

TIG

TIH

TI Series

Immersion Temperature Sensors

Product Overview

TI Series immersion temperature sensors are encased in a corrosion-resistant stainless steel housing with three installation choices: service entry body (TIG), threaded NPT (TIH), or indoor junction box (TIW, TID). A variety of probe lengths and RTD/thermistor options oer application exibility. All TI Series sensors are warranted for a period of ve years.

Product Identiﬁcation

Enclosure

T I

D = Duct G = Service Entry Body H = Threaded NPT Only W = Water resistant housing

Immersion Probe

Length “L”

A = 2 ½" (64 mm) B = 4" (102 mm) C = 6" (152 mm) D = 8" (203 mm) E = 12” (305 mm)

Thermowell

0 = None 1 = Add Thermowell

Thermowell Sizing

Probe Length Thermowell Length

A 2½" (64 mm) 1 ½” (38 mm) B 4" (102 mm) 3” (76 mm) C 6" (152 mm) 5” (127 mm) D 8" (203 mm) 7” (178 mm) E 12” (305 mm) 11” (279 mm)

Sensor

Type

B = 100R platinum, RTD C = 1k platinum, RTD D = 10k T2, Thermistor E = 2.2k, Thermistor F = 3k, Thermistor G = 10k CPC, Thermistor H = 10k T3, Thermistor I = 1k Balco (Nickel-iron) RTD J = 10k Dale, Thermistor K = 10k w/11k shunt, Thermistor M = 20k NTC, Thermistor N = 1800 ohm, Thermistor R = 10k US, Thermistor S = 10k 3A221, Thermistor T = 100k, Thermistor U = 20k “D”, Thermistor W = 10k T2 high accuracy, Thermistor Y = 10k T3 high accuracy, Thermistor Z = 10k E1, Thermistor CC = 15k, Thermistor

Options

Cal Certiﬁcate

0 = None 1 = 1 point Cal validation 2 = 2 point Cal validation

Threads

Blank = NPT A = BSPT B = DIN 2999

Alta Labs, E nercept, Ensp ector, Hawkeye, Trus tat, Aerospo nd, Veris, and th e Veris ‘V’ log o are tradema rks or registe red tradema rks of Veris Ind ustries, L. L.C. in the USA and /or other countri es.

Other companies’ trademarks are hereby acknowledged to belong to their respective owners.

Installation Guide

Temperature TISeries

Speciﬁcations

Dimensions

2.2"

(56 mm)

Wiring

Probe

Test Pressure

(102 mm)

22 AWG; 2-wire RT D/ Thermistor

Stainless Steel

200 psi

TID Model

0.25" dia" (6.3mm)

0.5" nom. (13 mm)

TIW Model

4.5"

(114 mm)

2.8"

(71 mm)

1.5"

(38 mm)

1/2" NPT Standard

0.25" dia" (6.3mm)

Other companies’ trademarks are hereby acknowledged to belong to their respective owners.

+ 1 hidden pages