Veris TD Installation Instructions

Installation Guide

Temperature

• This product is not intended for life or safety applications.

• Do not install this product in hazardous or classied locations.

• Read and understand the instructions before installing this product.

• Turn oﬀ all power supplying equipment before working on it.

• The installer is responsible for conformance to all applicable codes.

No responsibility is assumed by Veris Industries for any consequences arising out of the

use of this material.

NOTICE

TD/TF/TG Series

Duct Mounted Temperature Sensors

Product Overview

TD, TF, and TG temperature sensors monitor the temperature of the air inside a duct. The probe is available in multiple lengths to suit multiple applications. All models have standard resistive outputs compatible with building control systems, and all models are warranted for a period of ve years.

Product Identiﬁcation

Enclosure

D = Duct F = Duct w/ mounting box G = Duct w/ water resistant housing

Probe Length

B = 4" (102 mm) C = 6" (152 mm) D = 8" (203 mm) E = 12” (305 mm) F = 18” (457 mm) G = 24” 610 mm) K = 36” (914 mm)

Sensor Type Output

RØ

B = 100R platinum, RTD C = 1k platinum, RTD D = 10k T2, Thermistor E = 2.2k, Thermistor F = 3k, Thermistor G = 10k CPC, Thermistor H = 10k T3, Thermistor I = 1k Balco (Nickel-iron) RTD J = 10k Dale, Thermistor K = 10k w/11k shunt, Thermistor M = 20k NTC, Thermistor N = 1800 ohm, Thermistor R = 10k US, Thermistor S = 10k 3A221, Thermistor T = 100k, Thermistor U = 20k “D”, Thermistor W = 10k T2 high accuracy, Thermistor Y = 10k T3 high accuracy, Thermistor Z = 10k E1, Thermistor CC = 15k, Thermistor

= Resistive

Cal Certiﬁcate

0 = None 1 = 1 point Cal validation 2 = 2 point Cal validation

Speciﬁcations

Wiring

Housing

Approvals

Alta Labs, E nercept, Ensp ector, Hawkeye, Trus tat, Aerospo nd, Veris, and th e Veris ‘V’ log o are tradema rks or registe red tradema rks of Veris Ind ustries, L. L.C. in the USA and /or other countri es.

Other companies’ trademarks are hereby acknowledged to belong to their respective owners.

22 AWG; 2-wire RT D/ Thermistor

Stainless Steel

COMPLIANCE INFORMATION

Installation Guide

1.5"

Temperature TD/TF/TGSeries

Dimensions

(51 mm)

4.3"

(109 mm)

(74 mm)

(117 mm)

(28 mm)

2.9"

4.6"

1.1"

0.7"

(18 mm)

(38 mm)

2.3" (59 mm)

Foam Gasket

2.5" x 2.5" (62 mm x 62 mm)

1.1"

(28 mm)

TD Model

TF Model

TG Model

0.25" Dia. (6 mm)

0.25"Dia. (6 mm)

Installation

2.0"

(51 mm)

1. Drill a 3/8” diameter hole into a duc t for the sensor probe.

2. Insert the probe into the duct.

3. Secure the junction box housing (TF/TG) or the mounting ange (TD) to the outer surface of the duct using the self-tapping screws provided.

4. Wire as shown.

Thermistor

RTD

Orange

Other companies’ trademarks are hereby acknowledged to belong to their respective owners.