Veris PG, PV Installation Instructions

Installation Guide

Pressure Sensors

PG/PV

PGE/PVE

PG/PV only

• This product is not intended for life or safety applications.

• Do not install this product in hazardous or classied locations.

• Read and understand the instructions before installing this product.

• Turn oﬀ all power supplying equipment before working on it.

• The installer is responsible for conformance to all applicable codes.

No responsibility is assumed by Veris Industries for any consequences arising out of the

use of this material.

NOTICE

PG/PV Series

Gauge Pressure Sensors

Product Overview

The PG, PV, PGE, and PVE pressure transducers are compatible with a variety of HVAC and industrial applications. Volt and mA output options ensure integration with building systems. A wide selection of pressure ranges oers application exibility. PG and PV deluxe models have a stainless steel housing, while PGE and PVE standard models have a stainless steel wetted connector. All models are warranted for a period of ve years.

Product Identiﬁcation

Type

Blank = Deluxe E = Economy

Range

03 = 0 to 15 psig (Deluxe only) 04 = 0 to 25 psig 05 = 0 to 50 psig 06 = 0 to 75 psig 07 = 0 to 100 psig 08 = 0 to 250 psig 09 = 0 to 500 psig 10 = 0 to 1000 psig 11 = 0 to 5000 psig 12 = 0 to 10000 psig

Wetted Material Output

= 316L stainless steel

B = 1-5VDC (economy only) M = 4-20mA V = 0-10VDC (deluxe only) J = 0-5VDC (deluxe only)

Type

Range

Blank = Deluxe E = Economy

Call factory f or ranges not shown.

03 = -14.7 to 15 psig (Deluxe only) 04 = -14.7 to 25 psig 05 = -14.7 to 50 psig 06 = -14.7 to 75 psig 07 = -14.7 to 100 psig 08 = -14.7 to 250 psig 09 = -14.7 to 500 psig 10 = -14.7 to 1000 psig 11 = -14.7 to 5000 psig 12 = -14.7 to 10000 psig

Wetted Material

= 316L stainless steel

Output

B = 1-5VDC (economy only) M = 4-20mA V = 0-10VDC (deluxe only) J = 0-5VDC (deluxe only)

Alta Labs, E nercept, Ensp ector, Hawkeye, Trus tat, Aerospo nd, Veris, and th e Veris ‘V’ log o are tradema rks or registe red tradema rks of Veris Ind ustries, L. L.C. in the USA and /or other countri es.

Other companies’ trademarks are hereby acknowledged to belong to their respective owners.

Installation Guide Pressure Sensors PG/PVSeries

Speciﬁcations

Supply Voltage

Output

Load Impedance

Standard Connection

Pressure Port

Accuracy *

Media Compatibility

Pressure Cycles

Over Pressure

Burst Pressure

Shock

Vibration

EMI/RFI Protection

Rating

Operating Temperature Range

Compensated Temperature Range

Total Error Band Over Temperature

Humidity

* Accuracy includes nonlinearity and hysteresis. ** BFSL = Best ﬁt straight line

ELECTR ICAL

10-28 V DC

Deluxe: 0 - 5/ 0 -10 VDC ( 3- wire) or 4-20 mA (2-wire )

Economy: 1-5 VDC (3 wire) or 4 -20 m A (2- wire)

>100 kΩ

Cable gland 24” (600 mm) length

1/4”NPT Male

PERFORMANCE AT 25°C (77 °F)

Deluxe: ± 0. 25% BFSL **; Economy: ± 0.50% BFSL **

Fluids & gases compatible with 316L stainless steel

>100 million cycles

2x F.S. without change in calibration

5x rated pressure or 20,0 00 PSI

OPERATING CO NDITION S

100G, 11 msec, 1/2 sine

Deluxe: 20G peak , 20 to 240 0 Hz

Economy: 10G peak, 20 to 200 0 Hz

Deluxe: yes; Economy: no

Deluxe: IP-66; Economy: IP-65

-4 0° to 85°C ( -4 0° to 185°F)

0° to 55°C (3 2° to 130°F)

<±1% of FS

0-95% RH, non-condensing

Dimensions

Jacketed Cable length = 2 ft. (61 cm) diameter = 0.18” (4.5 mm)

Shrink Tubing

0.375” dia.

Jacketed Cable length = 2 ft. (61 cm) diameter = 0.18” (4.5 mm)

Shrink Tubing

0.375” dia.

PG/PV

2.9”

(73 mm)

1.0”

(25 mm)

PGE/PVE

(37 mm)

0.9”

(23 mm)

1.5”

(88 mm)

2.6”

(66 mm)

3.5 ”

0.9” HEX (22 mm)

0.25” MNPT Thread (6 mm)

Other companies’ trademarks are hereby acknowledged to belong to their respective owners.

+ 1 hidden pages