Page 1
VD05
Page 2
1
Dear Customer,
Thank you for purchasing the Verilux Shelburne™ Deluxe
Natural Spectrum
®
Desk and Table Lamp. You have received an
innovative and quality manufactured product, backed by a oneyear limited warranty.
Many other healthy lighting products are available through our
catalog and online. To request a free copy of our catalog, call
our toll-free number 1-800-454-4408. You may also visit us on
the web at www.verilux.com to learn more about all our quality
Verilux products.
As a Verilux customer, your satisfaction means everything to us.
We look forward to serving you now and in the future.
Have a bright day!
Nicholas Harmon
President, Verilux, Inc.
Page 3
6
Troubleshooting
Before requesting service on your Verilux® lamp please read the
following:
• Make sure all power connectors, cords and plugs are inserted fully
and securely.
• Make sure there is power to the wall outlet or try another outlet – not
connected to a dimmer.
PROBLEM CHECK SOLUTION
Light Won’t
Come On
Blackening/Darkening
at Ends of Bulb
Light Flickers
Has the plug come
loose?
Is the bulb old?
Is the bulb connected
securely into socket?
Is the bulb new?
Is the bulb old?
Has the plug come
loose?
Is the bulb connected
securely to the socket?
Is the lamp connected
to a dimmer switch?
Insert plug securely into wall outlet.
Check bulb for blackening/darkening at ends (an indicator of bulb life)
and replace bulb. See www.verilux.com.
Be sure the bulb is securely seated into socket, repeat the bulb
installation process.
Sometimes when a new bulb is turned on for the first time the tube will
darken, but this will fade after a few minutes.
With older bulbs darkening of the tube indicates end of bulb life (this
doesn't affect operation except to reduce the amount of light available
since the phosphor in that area has become inactive). Bulb replacement
is recommended.
Insert plug securely into wall outlet.
Be sure the bulb is securely seated into socket, repeat the bulb
installation process.
CAUTION: DISCONNECT LAMP FROM OUTLET
PRIOR TO REPEATING THE BULB INSTALLATION PROCESS.
Connect lamp plug only to wall outlet without dimmer switch.
Care & Cleaning
Your Verilux lamp is made from high quality materials that will last for
many years with minimum care.
Clean only with a soft dry cloth – DO NOT USE SOLVENTS OR
CLEANERS CONTAINING ABRASIVES OR AMMONIA.
WARNING: To prevent risk of shock or personal injury
when cleaning lamp, make sure you have turned off and
unplugged the lamp, and allow sufficient time for the bulb
to cool.
Page 4
5
General Precautions
• Do not use with power supply voltage other than 120V AC.
• Avoid placing the lamp in areas that are dusty, humid/moist, lack
ventilation or are subject to constant vibration.
• Not for use with light dimmers, timers, motion detectors, voltage
transformers or extension cords.
• Do NOT use lubricating agent in bulb assembly.
• The light bulb may become loose during transit. To reinstall the light
bulb, see the bulb installation instructions on page 3 of this manual.
• Close supervision is recommended when this lamp is used by or
near children, or others who may not understand the need for these
precautions.
If interference occurs with televisions, cordless phones and
other devices:
• Reorient or relocate the receiving antenna.
• Increase the separation between the lamp and receiver.
• Connect the lamp into an outlet on a circuit different from that to
which the receiver is connected.
• Move the lamp out of the line of sight of the remote control receiver.
• Consult the dealer or an experienced radio/TV technician for help.
Page 5
2
CAUTION:
• To reduce the risk of electric shock, do not dismantle. There are no
serviceable parts inside.
• To reduce the risk of fire or electric shock, do not expose this unit to
rain or moisture.
WARNING: To reduce the risk of fire, electric shock or personal injury:
• Turn off/unplug and allow to cool before replacing bulb or cleaning.
• Do not operate the lamp in close proximity to flammable or
combustible vapors, such as aerosol (spray) products or where
oxygen is being administered.
• Use only the type of bulb and maximum wattage indicated by
Verilux
®
.
• Never cover the lamp when it is in operation.
• Read these instructions before using this lamp.
• Keep these instructions for future reference.
• Do not use this lamp in damp/humid or wet locations.
• For indoor use only.
• Clean only with dry cloth.
• Do not defeat the safety purpose of the polarized plug. A polarized
plug has two blades with one wider than the other. If the provided
plug does not fit in your outlet, consult an electrician for replacement
of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly
at plugs, and the point where it exits from the lamp.
• Unplug this lamp during lightning storms or when unused for long
periods of time.
• If the lamp has been damaged in any way, such as the power supply
cord or plug is damaged, liquid has been spilled or objects have
fallen onto the lamp, the lamp has been exposed to rain or moisture,
does not operate normally, or has been dropped, it should not be
operated. There are no user serviceable parts within this lamp.
SAVE THESE INSTRUCTIONS
Important Safety Instructions
Page 6
3
Assembly Instructions
Before assembling, please review all instructions.
1. Carefully lay out all parts on flat surface and refer to diagrams on
page 4 of this manual.
2. Screw post (C) into the base (A) and hand tighten.
3. Loosen the thumbscrew (B) to adjust the lamp height. Adjust the
lamp (D) to the desired height and tighten the thumbscrew (B).
4. Rotate shade (F) to right angle with body (D) and parallel to the
floor. Then, use the supplied Allen wrench (E) to carefully tighten
the screw.
5. Remove thumbscrew from Optix
®
filter on lamp head and carefully
slide filter out of channel and place on clean surface (Fig. 1).
6. Remove the 27 Watt Natural Spectrum
®
bulb from the packaging
and carefully insert it into the socket (Fig. 2). Be sure to hold the
bulb by the base and ensure it is fully inserted into the socket and
clipped into the metal clip. Note: the telephone number on the bulb
provides contact information when reordering.
7. Slide Optix filter back into place and re-install thumbscrew (Fig. 5).
Do not over tighten.
8. Plug lamp into an appropriate outlet and turn on the switch.
9. Do not use with an extension cord or on a circuit with a dimmer
switch.
10. Save the packaging in case you need to send the lamp to Verilux
®
for servicing.
Page 7
4
Assembly Instructions — continued
Page 8
VD05-MAN-
Printed in China for Verilux, Inc.
© Copyright 2010 Verilux, Inc. All rights reserved.
Please visit our website at www.verilux.com or call our Customer Service Department at
1-800-786-6850
Representatives are available Monday — Friday, 9am — 5pm EST
340 Mad River Park, Waitsfield, VT 05673
One Year Limited Warranty
ATTENTION! ONCE OPENED, PLEASE DO NOT RETURN THIS PRODUCT TO THE
STORE WHERE IT WAS PURCHASED FOR REPAIR OR REPLACEMENT!
Many questions may be answered by visiting www.verilux.com, or you may call our
Customer Service Department at 800-786-6850 during normal business hours.
This limited warranty is provided by: Verilux, Inc., 340 Mad River Park, Waitseld, VT 05673
Verilux warrants this product to be free from defects in material and workmanship for a
period of one year from the date of the original retail purchase from Verilux or an authorized
Verilux distributor. Proof of purchase is required for all warranty claims. During the
limited warranty period, Verilux, Inc. will, at its option, repair or replace defective parts of
this product, at no charge to the customer, subject to the following limitations: This limited
warranty does not include any postage, freight, handling, insurance or delivery fees. This
warranty does not cover damage, defect or failure caused by or resulting from accident,
external destruction, alteration, modication, abuse, misuse or misapplication of this
product.
This warranty does not cover damage to the product resulting from return shipping or
handling. The use of shipping insurance is recommended to help protect your product.
Return Authorization is required for all returns. To obtain a Return Authorization, please
contact the Verilux Customer Service Department at 800-786-6850.
If, during the rst year of ownership, this product fails to operate properly, it should be
returned as specied at www.verilux.com/warrantyreplacement or as instructed by a Verilux
customer service representative at 800-786-6850.
Note: Verilux recommends using a quality surge suppressor on all electronics equipment.
Voltage variations and spikes can damage electronic components in any system. A quality
suppressor can eliminate the vast majority of failures attributed to surges and may be
purchased at electronics stores.
Due to ongoing improvements, actual product may have slight variations from the product described in this manual.
Loading...