Verilux PL01 User Manual

®

Planet Light

Energy Saving Natural Spectrum®
Adjustable Desk Lamp

PL01

Dear Customer,

Thank you for purchasing the Planet Light

®

Energy
Saving Natural Spectrum® Adjustable Desk Lamp. You
have received a quality product, backed by a one year
limited warranty. As a Verilux customer, your satisfaction
means everything to us. We look forward to serving you
now and in the future.

Many other healthy lighting products are available
through our
www.verilux.com

catalog and online. Visit us on the web at

to request a free catalog and learn

more about all our quality Verilux products.

Have a Bright Day!

Nicholas Harmon
President, Verilux, Inc.

2

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

®

Thank you for purchasing the Planet Light
Lamp. Please read the following safety information before using. To reduce the
risk of re, electrical shock, or injury to persons:

• Do NOT dismantle.

• Do NOT alter power cord.

• Turn off/unplug and allow to cool before replacing bulb or cleaning.

• For indoor use only.

• The lamp is an electrical device. DO NOT USE NEAR WATER.

Natural Spectrum® Adjustable Desk

GENERAL PRECAUTIONS

• Before plugging in the lamp, check to make sure the voltage corresponds
with the main voltage of your location (120 volts).

• Do not use the lamp outside or in wet locations such as bathrooms. It is
intended for indoor, dry use only.

• Not for use with light dimmers, timers, motion detectors or extension cords.

• This product may cause interference with radios, cordless telephones,
or devices that use a wireless remote control such as televisions. If
interference occurs, move the product away from the device, plug the
product or device into a different outlet or move the lamp out of the line of
sight of the remote control receiver.

• Do NOT use lubricating agent in assembly; please see troubleshooting
section if you are having difculty assembling your lamp.

• Unplug from electrical outlet for extended periods of non-use or during
lightning storms to ensure protection of the electronics.

3

Bulb Installation and Removal

Removal

1. Unplug lamp from power source.

2. Firmly hold bulb base (B) and pull

bulb (C) from the socket (A) in an
outward motion.

Installation

1. Unplug lamp from

power source.

2. Firmly hold base (B)

and push bulb (C) into
the socket (A).

A

3. Be sure bulb is

rmly seated in the
socket (see below) and snapped
into the metal bulb clip (D).

YES NO

D

B

C

D

No

gap

Correctly seated bulb Incorrectly seated bulb

CAUTION: ALWAYS UNPLUG LAMP BEFORE PERFORMING BULB
REPLACEMENT OR INSTALLATION.

Notice

large gap

4

Head Adjustment

Knob

Upper Shaft

Adjustment Knob

Lower Shaft

Lamp Diagram

Lamp Head

Upper Shaft

On/Off Switch

Base

5

Troubleshooting

• Make sure all power connectors, cords and plugs are inserted fully
and securely.

• Make sure there is power to the wall outlet or try another outlet – not
connected to a dimmer.

Be sure the bulb is securely seated into the socket, repeat the bulb
installation process. CAUTION: DISCONNECT LAMP FROM OUTLET
PRIOR TO REPEATING THE BULB INSTALLATION PROCESS.

Care & Cleaning

Your Planet Light® lamp is made from high quality materials that will
last for many years with a minimum of care.

Clean only with a soft dry cloth – DO NOT USE SOLVENTS OR

CLEANERS CONTAINING ABRASIVES OR AMMONIA

WARNING: To prevent risk of shock or personal injury

when cleaning lamp, make sure you have turned off and
unplugged the lamp and allow sufficient time for the bulb
to cool.

6

One Year Limited Warranty

ATTENTION! ONCE OPENED, PLEASE DO NOT RETURN THIS PRODUCT TO THE
STORE WHERE IT WAS PURCHASED FOR REPAIR OR REPLACEMENT!

Many questions may be answered by visiting www.verilux.com, or you may call our
Customer Service Department at 802-496-3101 during normal business hours.

This limited warranty is provided by: Verilux

Verilux warrants this product to be free from defects in material and workmanship for a
period of one year from the date of the original retail purchase from Verilux or an authorized
Verilux distributor. Proof of purchase is required for all warranty claims. During the
limited warranty period, Verilux, Inc. will, at its option, repair or replace defective parts of
this product, at no charge to the customer, subject to the following limitations: This limited
warranty does not include any postage, freight, handling, insurance or delivery fees. This
warranty does not cover damage, defect or failure caused by or resulting from accident,
external destruction, alteration, modication, abuse, misuse or misapplication of this
product.

This warranty does not cover damage to the product resulting from return shipping or
handling. The use of shipping insurance is recommended to help protect your product.

Return Authorization is required for all returns. To obtain a Return Authorization, please
contact the Verilux Customer Service Department at 802-496-3101.

If, during the rst year of ownership, this product fails to operate properly, it should be
returned as specied at www.verilux.com/warrantyreplacement or as instructed by a Verilux
customer service representative at 802-496-3101.

Note: Verilux recommends using a quality surge suppressor on all electronics equipment.
Voltage variations and spikes can damage electronic components in any system. A quality
suppressor can eliminate the vast majority of failures attributed to surges and may be
purchased at electronics stores.

Due to ongoing improvements, actual product may have slight variations from the product described in this manual.

®

, Inc., 340 Mad River Park, Waitseld, VT 05673

7

PL01-MAN-Rev3

© Copyright 2010 Verilux, Inc. All rights reserved.

Printed in China for Verilux, Inc.