Verhor NE-083 User Manual

Model: NE-083
User Manual
Guangzhou Yinhe Lighting&Sound Equipment Factor
User Manual
Please read over this manual before use the machine.
Attention: Keep clean Use in door
7
Put in the horizontal direction and don’t incline and place down Power off or pull out plug after use No waterproof ,if there are some humildity, water or fog liquid in it ,please switch off power and contact distributor as soon as possible. There are no spare parts with machine.If you need to repair it, please contact distributor or professional repair works.
Avoid fire:
Only for adults operate ,Equip it over the touch of children and pay more attention during operation. Don’t spray it to people directly and far away fire. The temperature of sprayer is very high so that keep the space between machine and other material things more than 100cm .(40℃-80℃)
Put the machine at a drafty place and don’t over the cool holes to keep the best cool effect.keep the space between the smoke machine and around things more than 20cm and between smoke machine and thinder more than 20cm And without easily burnt things within 300cm
Avoid explode:
Don’t add tinder liquid such as oil,gas,perfume and etc.in fog machine.
Pay more attention to all notices sign and operation instruction on all machines
Please use the high quality fog liquid recommended distributors .Bad quality fog
liquid may get blast or spray oil
Often check whether there has enough fog liquid
Get out all fog liquid otherwise to see the doctor immediatey.Use clean water to wash
skin and eyes once fog liquid touches them .
Remove package and check:
1. Open carton to check whether all necessary spare parts include accord the
specification list.Please contact distributor if there are something missed.
2. Check the appearance of machine and power line to see whether they have some obvious
damage.Please contact distributor once you find something and stop to use fog machine.
Installation:
1.Take away all pack material especially the spray mouth .
2. Set in the horizontal direction and open the cover of liquid can.
3. Add high quality fog liquid in the machine and screw the cover of liquid can. Bad quality fog liquid will damage fog machine.
4. Plug the plug of remote console in the socket of the back of machine.
Operation:
1. Connect the power line to the power socket with earth line. Turn the switch at
“on” and the machine heat. The red LED of line controller will light once the machine finish heat.
2. Press red key, the machine will spray fog (press it as long as you need)
3. The red LED of remote console light or not means the machine can spray fog or heat
Loading...
+ 2 hidden pages