Verbatim 2.5” SATA Solid State Drive Detailed Installation Manual

2.5” SATA Solid State Drive
Upgrade Kit

Detailed Installation Guide

English

2

Contents

Detailed Installation Guide

3

C

ontents:

3

Tools Needed: 3

System Requirements for NTI Echo Software: 3

yq

Other: 3

p

A. Cloning your existing system (Window operating systems only) onto your Verbatim SSD: 3

gy gy ( p gy y) y

gy p g y y

pp p g y

(pp )

pg

pp p gy

y

y

Return Procedure: 6

g

p

WEEE Notice 7

CE Declaration 7

p

Technical Support 8

pp

pp ,

Detailed Installation Guide

ongratulations on purchasing your Verbatim 2.5” SATA SSD Upgrade Kit. Please read all instructions before attempting to install this
evice. This kit contains everything needed to transform your notebook or desktop PC’s performance and reliability by replacing your HARD

DRIVE with a high performance Solid State Drive (SSD).

ontents

:

• Quick Installation Guide (printed document

)

• 2.5” SATA SSD Solid State Drive with preloaded NTI Echo Cloning Software installer (setup.exe) and detailed installation guide
(Installation Guide.pdf)

• 2.5” USB drive enclosure (with SSD and bridge board temporarily installed) and top cover (do not assemble until directed)

.

USB Cable

• 3.5” Mounting bracket (1), mounting screws (8) and Molex power cable (1) for desktop installations only

Tools N

eeded:

• Philips or fl at blade screwdriver(s) as required for notebook/desktop access panels and HARD DRIVE/SSD mounting screws

.

• Notebook or Desktop PC operating manual (suggested

)

System Requirements for NTI Echo Software

:

Operating System: Windows 7, Windows Vista™ (SP1), Windows XP® (SP3) and Windows 2000® (SP4)

Pentium processor or higher

•

28MB RA

M

45MB Free Space

Internet connection required for software validation.

ther:

AC power source for your laptop.

Adobe Acrobat Reader

f

or displaying .pdf fi les

Installation Options

:

A. Cloning your existing system (Window operating systems only) onto your Verbatim SSD:

NTI Echo cloning software is included to facilitate the transfer of all operating system, settings, and user data from your existing HARD DRIVE
to your new Verbatim 2.5” SATA SSD. After installation, your HARD DRIVE can be used with the included 2.5” USB drive enclosure and USB

able as a removable hard drive, or left in your desktop system as an auxiliary or secondary drive. To start, simply proceed directly to the

section titled “Laptop/Notebook Users: or “esktop Users: as applicable

.

B. Installing your operating system onto your SSD:

If you are using a Mac, or if you are using another operating system and wish to perform a fresh install of your OS onto the Verbatim SSD,

ou will need to review the appropriate hardware installation section, install the SSD, and then boot your system from the original operating
system CD’s (or other boot media) supplied by your system maker and perform a fresh installation of the OS onto the SSD. After installing
the OS, you will need to install all applications

f

rom their original distribution media, and apply updates to all OS, applications, and drivers

as re

q

uired. You will also need to copy any user data (if applicable) from backup media to your new SSD after the OS installation has been

ompeted. If you are not familiar with these steps, please seek professional installation assistance, or consider installation option A if you are
using a Windows operating system

.

mportant Note: It is recommended to backup your PC before cloning to avoid data loss due to any unforeseen diffi culty.

Laptop/Notebook Users:
Preparing to Clone your HARD DRIVE onto the Verbatim SSD:

. Connect to an AC power source to avoid battery rundown during the cloning operation

.

. Turn on your PC and connect to the internet by launching a web browser (for automatic processing of software validation key)

.

3. Attach USB cable to 2.5” USB drive enclosure containing your Verbatim 2.5” SATA SSD.

4. Attach the USB cable to USB port on the machine to be cloned.

5. Locate the removable drive corresponding to the USB attached SSD and copy the NTI Echo installer (setup.exe) and the installation

uide (Installation Guide.pdf) to your desktop.

6. Launch the NTI Echo installer (setup.exe), following the on screen prompts.

. After installing the NTI Echo software, launch the NTI Echo program, from the windows start menu or by accessing the NTI Echo

esktop shortcut.

8. Confi rm the source (your HARD DRIVE) and the destination drive (Verbatim 2.5” SSD) has been properly selected.

ote: indented options (if shown) on the source pull down menu are partitions on your HARD DRIVE. Selecting one of these options will clone only the selected partition to the Verbatim

SSD

,

not the entire source drive.

9.If you want to save space on the destination drive, you may exclude any unwanted fi les from the cloning process using the fi lter option

.

10. Press START to begin the cloning process. Acknowledge the warning message that your PC will restart and the cloning operation

will begin.

ote: to begin the cloning process your PC will boot up in Linux. Some error messages may be displayed momentarily during the Linux boot sequence. This is normal and can be

isregarded.

. During the cloning process, status and remaining time can be viewed on the displayed progress bar

.

12.After the cloning operation is completed, you may safely remove the USB connected SSD using the safely remove hardware system tray

icon an

d sh

ut down your PC.

Hardware Installation (Laptop/Notebook

)

1. After shutting down your notebook, disconnect the power cord and remove the battery from your notebook

.

. Consult your computer’s owner’s manual for information concerning the removal of the system HARD DRIVE. (Typically you will need to

locate and remove an access panel, and remove any screws securing the hard drive’s mounting tray. The mounting tray containing the
HARD DRIVE can be removed from the notebook, unplugging the SATA cable. Next, remove the screws holding the HARD DRIVE in the
mounting tray, being especially careful not to injure yourself with a sharp screwdriver or accidentally drop the HARD DRIVE.

ote: HARD DRIVE mounting screws can be very tight. It is important to use a properly size screwdriver to avoid injury to yourself or possible damage to the mounting screws or HARD
RIVE. Please seek qualifi ed assistance if you are having diffi culty removing these screws

.

3. Remove the USB cable and the SSD drive from the 2.5” USB drive enclosure. Gently remove the bridge board from the SSD SATA connector

being careful not to damage any components.

4. Place the SSD into your notebook’s drive mounting tray and secure by re-installing 4 mounting screws. Slip the tray with the SSD into your

notebook’s drive bay and reconnect the SATA cable. Refasten the drive mounting tray into your machine and gently tighten all screws. Re-

nstall the access panel and battery. Reconnect the power cord connection

.

5. Turn on your notebook. Your system will now boot up from the newly installed SSD.

Desktop Users: Hardware Installation and Cloning

:

1. Turn off the power to your computer, and disconnect the power cord

.

. Consult your computer’s owner’s manual for information concerning removing the access panel(s) and gaining access to the drive bay(s).

Typically you will need to locate and remove a side panel and/or a front panel in order to gain access.)

3. Remove the Verbatim SSD drive

f

rom the 2.5” USB drive enclosure, and gently remove the bridge board from the SSD SATA connector

bein

g

careful not to damage any components.

4. Place the SSD into

y

our desktop’s drive bay. You will need to use the included 3.5” mounting bracket and the included screws to mount

the SSD in your desktop’s 3.5” drive bay.

ote: If your computer’s power cable bundle does not have a mating SATA power connector, you may optionally insert the included adapter cable between the SSD and a 4-pin Molex

power connector on the power cable bundle. Connect both the data and power cables to the SSD after it is installed into the bay.

5. Re-install the access panel(s) and connect the AC power cord.

6. Turn on your desktop system and connect to the internet by launching a web browser (

f

or automatic processing of software validation key).

7. Locate the drive corresponding to the SSD and copy the NTI Echo installer (setup.exe) and the installation guide (Installation Guide.pdf)

to your desktop for future reference.

8. Launch the NTI Echo installer (setu

p

.exe), following the on screen prompts.

9. After installing the NTI Echo software, launch the NTI Echo program, from the windows start menu or by accessing the NTI Echo desktop

hortcut

.

10. Confi rm the source (your HARD DRIVE) and the destination drive (Verbatim 2.5” SSD) has been properly selected.

Note: indented options (if shown) on the source pull down menu are partitions on your HARD DRIVE. Selecting one of these options will clone only the selected partition to the Verbatim
SSD, not the entire source drive.

11. If you want to save space on the destination drive (for example, you are replacing a desktop HARD DRIVE with a smaller capacity SSD boot

drive), you may exclude any unwanted fi les from the cloning process using the fi lter option

.

12. Press START to begin the cloning process. Acknowledge the warning message that your PC will restart and the cloning operation will

egin.

Note: to begin the cloning process your PC will boot up in Linux OS. Some error messages may be displayed momentarily during the Linux boot sequence. This is normal and can be
disregarded.

13. During the cloning process, status and remaining time can be viewed on the displayed progress bar.

14. After the clonin

g op

eration is completed, you may leave your HARD DRIVE installed in your desktop PC if desired and use your Verbatim

2.5” SATA SSD as your primary or boot drive. If you choose to remove your HARD DRIVE, shutdown the system, remove the access panel(s)
and remove the HARD DRIVE from the drive bay, disconnecting the SATA and power cables as required and re-install the access panel(s).

15. You wi

ll

need to select the Verbatim SSD as your boot drive in your system BIOS settings. Restart your system, pressing required keys

normally F12) as directed to interrupt the normal booting process and access your system BIOS settings. After selecting the Verbatim 2.5”
SSD as your primary boot device, save your revised BIOS settings and exit the BIOS menu. Your Verbatim SSD is now confi gured as your
primary boot device and is ready for use

.

Laptop / Notebook / Desktop Users: Installing your HARD DRIVE into the 2.5” USB drive enclosure

If desired, your original HARD DRIVE can be now placed in the 2.5” USB drive enclosure and used as a removable hard drive, or simply
retained as a spare or backup drive.

Re-attach the bridge board to your HARD DRIVE’s SATA connector, being careful not to damage any components.

Place the HARD DRIVE in the 2.5” USB drive enclosure. Plug in the mini USB cable to ensure top cover is properly positioned in next step.

. Place the top cover in position aligning the cutout over the mini USB connector and press into place. The cover will snap together. (Note:

once t

h

e cover is snapped in place, it cannot be removed without damaging the case.)

. Connect the other end of the USB cable to your USB port when you are ready to use this device.

Note: It is recommended to retain the original data on the HARD DRIVE until you are certain the new installation is working properly, and that all necessary fi les have been transferred.

Note: If at any time you experience diffi culty, you may reinstall your original HARD DRIVE into your machine, and bring your system back to its original state before installing the SSD.

Note: The NTI Echo so

f

tware may be uninstalled if desired from your SDD after the installation is completed, using the Add/Remove Program feature contained in Windows Control Panel

.

Limited Warranty Term

s

V

erbatim Limited warrants this product to be free from defects in material and workmanship for a period of 2 years from date of
urchase. This warranty excludes batteries. If this product is found to be defective within the warranty period, it will be replaced at no

cost to you. You may return it with your original cash register receipt to the place of purchase or contact Verbatim.

Product re

p

lacement is your sole remedy under this warranty, and this warranty does not apply to normal wear or to damage resultin

g

rom abnormal use, misuse, abuse, neglect or accident, or to any incompatibility or poor performance due to the specific computer

tware or hardware

used

. VERBATIM WILL NOT BE LIABLE FOR DATA L

OSS O

R ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL

DAMAGES, HOWEVER CAUSED, FOR BREACH OF WARRANTIES OR OTHERWISE. This warranty gives you specific legal rights and

ou may also have other rights which vary from state to state or country to country.

NOTE: Verbatim Limited may at any time revise the content of this user guide without further notice.

Limited 3-Year Warranty Term

s

The Verbatim Americas, LLC warranty obligations for this hardware product are limited to the terms set forth below:

Verbatim warrants its

p

roducts to be free of defects in material and workmanship under normal use and service for a period of 3 years from the date
of purchase. Verbatim’s sole obligation with respect to claims of non-conformance made within the warranty period described above shall be, at its
option, to repair or replace any item of Equipment that Verbatim, in its sole discretion, determines to be defective, subject to the procedure set forth

low

.

Verbatim’s warranty obligations hereunder are expressly conditioned upon (i.) the Products being properly installed, used and maintained at all
times by Customer; (ii.) the Products not being subject to unusual mechanical stress or unusual electrical or environmental conditions or other acts
of God; (iii.) the Products not being subjected to misuse, accident or any unauthorized installation/deinstallation by Customer or other third party;
(iv.) the Products not being altered or modifi ed in an unauthorized manner, unless approved in writing or otherwise performed by Verbatim and (v.)
Customer promptly installing all Product revisions that have been released for such Products by Verbatim throughout the warranty term. Verbatim
does not warrant that the Products will operate in any specifi c combination that may be selected for use by Customer or that the operation of the
Products will be uninterrupted or error free, or that all non-conformance or defects will be remedied. Additionally, Verbatim shall have no warranty
obligations for any failure of the Products to conform to the applicable product specifi cations resulting from the combination of any Product(s) with

ardware and/or software not supplied by Verbatim. If it is determined that any Product(s) reported as defective or non-conforming by Customer
during the warranty period is not defective or non-conforming, Verbatim may, at its option, charge Customer for any labor provided and expenses
incurred by Verbatim in connection with such determination, at Verbatim’s then current rates

.

Verbatim is not liable for any damage to or loss of any programs, data, or other information stored on any media contained within the Verbatim

ardware product, or any non-Verbatim product or part not covered by this warranty. Recovery or reinstallation of programs, data or other
information is not covered under this Limited Warranty.

Verbatim shall not be responsible for unauthorized sale or misrepresentation by unauthorized third party resellers. Verbatim warranties are not
trans

f

erable with ownership. Products purchased by auction, yard sale, fl ea market or purchased as demo units may not be covered under Verbatim’s

warranty.

THE WARRANTIES OF VERBATIM AND REMEDIES OF

CUSTO

MER SET FORTH IN THIS SECTION ARE EXCLUSIVE AND ARE GIVEN BY VERBATIM AND ACCEPTED BY

CUSTO

MER IN
LIEU OF ANY AND ALL OTHER WARRANTIES, WHETHER EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ALL WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE

,

ALL SUCH OTHER WARRANTIES BEING HEREBY EXPRESSLY AND UNEQUIVOCALLY DISCLAIMED BY VERBATIM AND WAIVED BY CUSTOMER TO THE EXTENT

ALLOWED BY LAW (AND TO THE EXTENT NOT WAIVABLE BY LAW, ARE LIMITED TO THE TERM OF THE EXPRESS WARRANTY SET FORTH HEREIN).

VERBATIM I

S NO

T RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION, INCLUDIN

G

ANY

COSTS O

F RECOVERING OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH THE VERBATIM PRODUCT. VERBATIM SPECIFICALLY DOES NOT REPRESENT

THAT IT WILL BE ABLE TO REPAIR ANY PRODUCT UNDER THIS LIMITED WARRANTY OR MAKE A PRODUCT EXCHANGE WITHOUT RISK TO OR L

OSS O

F PROGRAMS OR DATA. THI

S

WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE. FOR EXAMPLE, SOME STATES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THESE RESTRICTIONS MAY
NOT APPLY TO YOU

.

Return Pr

ocedure

:

The Customer shall obtain a Return Merchandise Authorization (RMA) number from Verbatim prior to returning any Equipment to Verbatim under
this warranty by contacting Technical Support (see www.verbatim.com/support). The Customer shall prepay shipping charges for Equipment
returned to Verbatim for warranty service, and Verbatim shall pay freight charges for the return of the Equipment to the Customer, excluding
customs duties or taxes, if any. All returns require a dated original proof of purchase and a letter explaining the problem. Before you deliver your
product

f

or warranty service it is your responsibility to backup all data, including all software programs. You will be responsible for reinstalling all
data. Data recovery is not included in the warranty service and Verbatim is not responsible for data that may be lost or damaged during transit or
a repair. Verbatim will not be responsible for items returned without an RMA or improperly packaged. Replacement Equipment shall be new or

ike new in performance and shall be warranted for the remaining duration of the warranty term of the non-conforming Equipment. All replaced

Equipment shall become the property of Verbatim. Any claims of defects not made within the warranty period shall be deemed waived by

ustomer

.

ight

s

Copyright © 2010 Verbatim Limited. No par t of this document may be reproduced in any form or by any means, for any purpose,
without the express written permission of Verbatim Corporation. All rights reserved.
All other brands and product names referenced herein are property of their respective owners

.

CC Compliance

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio

f

requency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined b

y

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or re

l

ocate the receiving antenna

.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

WEEE Not

ice

The Direc tive on Waste Elec trical and Elec tronic Equipment (WEEE), which entered into force as European law on 13th February 2003,

esulted in a major change in the treatment of electrical equipment at end-of-life.

The WEEE logo (shown at the left) on the product or on its box indicates that this produc t must not be disposed of or

dumped with your other household waste. For more in

f

ormation about electronic and electrical waste equipment

isposal, recovery, and collection points, please contact your local municipal household waste disposal service or shop

rom where you purchased the equipment.

E Declaration

EC Declaration of Conformit

y

It is hereby declared that this product complied with the essential protection requirements of Council Directive 89/336/EEC and
its amendments on the approximation of the laws of the Member States relating to electromagnetic compatibility.

This declaration applies to all specimens manufactured identical to the model submitted for testing/evaluation.

EN

550

22: 1998 + A1: 2

000

+A2: 2

003

EN 61

000-3-3

:19 95 + A1: 2001

EN 55

02

4: 1

998

+ A1:

200

1 + A2:

2003

IEC 61000-4-2: 1995 + A1: 1998 + A2: 200

0

IEC 61

000

-4-3:

2002

+ A1:

2002

IEC 61

000

-4-4: 1995 + A1:

2000

+ A2:

200

1

IEC 61000-4-5: 1995 + A1: 2000

IEC 61

000

-4-6: 1996 + A1: 2

000

IEC 61

000

-4-8: 1993 + A1: 2

000

IEC 61

000

-4-11: 1994 + A1:

2000

RoHS Compliance

This product is in compliance with Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003, on
the restriction of the use of certain hazardous substances in elec trical and electronic e

quip

ment (RoHS) and its amendments

.

Technical Suppor

t

Country Email Hotline Number

United Kingdo

m

[e-mail]

m

00 800 3883 2222

Franc

e

[e-mail] 00 800 3883 2222

Deutsc

hland

[e-mail]

m

00 800 3883 2222

Itali

a

[e-mail] 00 800 3883 2222

España [e-mail] 00 800 3883 2222

Portugal [e-mail]

m

00 800 3883 2222

Polska [e-mail]

m

00 800 3883 2222

оссия [e-mail] [phone]

6

esk

o

[e-mail]

m

+

353 6

1 22

6586

Magyarország [e-mail]

m

800 3883 2222

Eesti [e-mail] +

353 61 226586

Latvij

a

[e-mail] [phone]

86

Lietuv

a

[e-mail] +

353 6

1 22

6586

lovensko [e-mail]

m

+

353 61 226586

Slovenija [e-mail] [phone]

86

Türkiy

e

[e-mail]

m

+

353 61 226586

Nederland [e-mail]

800 3883 2222

λλάδα [e-mail]

m

[phone]

6

România [e-mail] [phone]

6

ългария [e-mail]

m

[phone]

6

Hrvatsk

a

[e-mail]

m

+

353 6

1 22

6586

Srbi

jasupp

[e-mail]

m

+

353 61 226586

uom

i

[e-mail]

m

800 3883

2222

Sverige [e-mail]

800 3883

2222

Danmar

k

[e-mail]

m

800 3883 2222

Norge

[e-mail]

800 3883

2222

ﺩﺣﺗﻣﻟﺍ ﺔﻳﺑﺭﻌﻟﺍ ﺕﺍﺭﺎﻣﻹﺍ

su

pp

[e-mail]

m

+

353 6

1 22

6586

Україн

а

[e-mail]

m

[phone]

86

Technical Support – Verbatim Americas, LL

C

Please visit the main technical suppor t sec tion at www.verbatim.com/support