Vera Control VeraSecure Quick Start Manual

VeraSecure

Advanced Smart Home Security Controller

Congratulations!

Welcome to Vera Smarter Home Control. The VeraSecure

Advanced Smart Home Security Controller provides security you can

count on, plus safety and convenience.

What’s In The Box

VeraSecure Controller

AC Power Adapter Ethernet Cable

LED Names

Power

Internet

Wi-Fi

Z-Wave

Service

ZigBee

Bluetooth

VeraLink*

Cellular

* VeraLink Protocol is either 345MHz (US) or 433MHz (EU) .

2-Way Audio Button

Press to activate 2-way audio intercom to speak with emergency
dispatch (requires optional monitoring service.)

Siren

Automatically emits a piercing alarm if there’s a security breach.

Microphone

Enables hearing what’s going on in your home from anywhere,
via the Vera app.

Battery Backup

If AC power goes out, this built-in Backup Battery will continue to
power VeraSecure for up to 8 hours to keep your home protected.

3G Cellular

If Internet goes out, the cellular data backup connection enables
VeraSecure to continue sending emergency alerts, notifications,
and also change home modes.

Antenna

External antenna extends the range of 345 (US)
or 433 (EU) MHz protocol.

Controller Features

1

2

4

7

3

6

5

8

9

For more information on these controller features go to:

www.getvera.com/controllers/verasecure

Mic

Select

Sync

Reset

2-Way Audio

Installation

Firmly connect the provided Ethernet Cable from your

VeraSecure to your Wi-Fi router (or other Internet source).

To setup your controller, go to http://home.getvera.com

If you are a new user, click the “I have a new controller”

button on the screen. Agree to the terms and conditions.
Then select your Controller.

If you already have an account, please login.

Click the “Add another controller” button.
Then select your Controller.

Follow the Setup Instructions.

Firmly connect the AC Power Adapter to VeraSecure

and plug it into an AC outlet. VeraSecure has no on/off
switch. It will power up as soon as you plug in
the AC adapter.

1

3

2

USBAntenna Ethernet Power

Overview

There are over two thousand devices that can work with VeraSecure.

VeraSecure Home Controller is the central hub for creating security or

smart home scenes. Scenes give you the power to simply and easily customize

your Vera controller to work with devices exactly the way you want.

Combine devices such as cameras, lighting and sensors

to personalize your system’s scenes.

SECURITY DEVICES

They are always on and monitoring your home. However, your VeraSecure
system will only report a breach if the sensor is in the “Armed” status. Normally,
these sensors are “Armed” in Night, Away and Vacation modes as default
settings. (You may change these defaults in the Settings section of the
Vera dashboard app.)

Wi-Fi Cameras (Indoor & Outdoor)

Door / Window Sensors

Motion Detectors

Glass Break Sensors

Outdoor Alarm

Help Scare Away Intruders

Go to www.getvera.com/scenes for more ideas

Vera Controller

Wi-Fi Camera with

Motion Detection

Automatic light and alarm

sounds with recording

=+

| Device Types

SAFETY DEVICES

Use these for home protection and peace of mind even when away from home.
Safety devices are always active and “Armed” regardless of which mode your
VeraSecure system is in. If a problem arises, you need to know about it,
regardless of whether you’re home, away, asleep or on vacation.

Smoke Detectors

Carbon Monoxide Detectors

Flood Sensor

Temperature & Humidity Sensors

Find Out Instantly When

Problems Occur

Go to www.getvera.com/scenes for more ideas

Vera Controller Flood Sensor You’re notified when a

water leak is detected

=+