Congratulations on choosing to buy a VEON product.
All products brought to you by VEON are manufactured to the highest
standards of performance and safety and, as part of our philosophy of
customer service and satisfaction, are backed by our comprehensive 3
Year Warranty.
We hope you will enjoy using your purchase for many years to come.
iii
Remote Control
07
1E
1A1F58
161B54
1217
50
1
3
5B
03
1C
025F40
5E
18
55
5657
14
0A
06
48
44
52
33
NA
43/53
4E
4F/09
5C
49/15
11
4A
60
10
4D
0C
4C
VOL
+
VOL
-
CH
+
CH
-
1 POWER: Set the unit to standby
mode; press it again to switch it on.
2 : Play/Pause in Timeshift and USB
mode.
3 : Move fast backward.
4 : Stop playing.
5 : Play the previous file.
FAV: Display your favourite program
list.
6 : Home page in Smart mode.
7 : Activate/deactivate air mouse in
Smart mode.
8 / / / :Press the RIGHT/LEFT
UP/DOWN buttons to navigate the
on-screen menus and adjust the
system settings to your preference.
Press OK to confirm your selection.
9 VOL +/-: Turn the volume up/down.
10 MUTE: Mute the sound. Press again
to restore the sound.
11 NUMBER BUTTONS (0-9): Select a
TV channel directly when watching
TV. The channel changes after 2
seconds.
12 : Record program in DTV mode.
13 : In HbbTV mode,
press the colour buttons to access
HbbTV applications (FreeviewPlus
catchup TV programs).
1
2
3
4
5
6
7
8
26
25
24
23
22
21
9
1019
11
12
13
20
18
151716
15
14
iv
Remote Control (Cont.)
07
1E
1A1F58
161B54
1217
50
1
3
5B
03
1C
025F40
5E
18
55
5657
14
0A
06
48
44
52
33
NA
43/53
4E
4F/09
5C
49/15
11
4A
60
10
4D
0C
4C
VOL
+
VOL
-
CH
+
CH
-
1
2
3
4
5
6
7
8
9
1019
11
12
13
26
25
24
23
22
21
20
18
151716
15
14
14 MENU: Display the main menu;
press again to return to the
previous menu page.
15 MEDIA: Enter Media (USB) mode
directly.
16 SUBTITLE: Enable/disable
subtitles.**
17 INFO: Display information of the
current program (DTV).
18 EPG: Launch the Electronic
Program Guide (DTV).
19 SMART TV/TV: Select SMART TV
or TV (DTV).
20 CH+/-: Press to play the next or
previous channel; press repeatedly
to scan through the channels.
21 OK: Confirm selection.
22 : Return to the previous
channel in DTV mode. Return to
the previous page in FreeviewPlus
catchup applications.
23 : Play the next file.
INDEX: Display the record list.
24 EXIT: Exit from the main TV menu
displayed on the screen. Display
the DVD title menu (DVD)*.
25 : Move fast forward.
26 SOURCE: Select the input source.
v
Remote Control (Cont.)
07
1E
1A1F58
161B54
1217
50
1
3
5B
03
1C
025F40
5E
18
55
5657
14
0A
06
48
44
52
33
NA
43/53
4E
4F/09
5C
49/15
11
4A
60
10
4D
0C
4C
VOL
+
VOL
-
CH
+
CH
-
There is a built-in keyboard on the back of the remote control for easy
operation (for Smart Hub).
12
TIPS:
• To enter UPPERCASE letters, press the ‘Caps’ button first, followed by the
chosen letter button.
• To enter the numbers and characters shown on the keys in yellow, press the
‘Alt’ button first, followed by the chosen letter button.
• As an alternative to the remote control keyboard, you can use the on screen
3
5
4
/
67890
0800 883 301
Customer Support
keyboard.
• Press the up/down/left/right navigation key to select characters.
• Press the RED button for ENTER function.
• Press the GREEN button to move the cursor to the left.
• Press the YELLOW button to move the cursor to the right.
• Press the BLUE button for backspace function.
NOTE: If you experience difficulty with connection or range of the air mouse
or keyboard features of the remote, please connect the USB air mouse
dongle extension cable to the USB port labelled ‘Air Mouse’ at the rear of the
T V.
NOTE: USB air mouse dongle must be connected for keyboard to work.
vi
Remote Control (Cont.)
Using the Remote Control
To use the remote control, point it towards the remote sensor at the front of
the TV.
The remote control has a range of up to approximately five metres (5m)
from the TV at an angle of up to 30 degrees each to the right and left of the
sensor. The remote control will not operate if its path is blocked.
NOTES:
• Do not drop, step on or otherwise impact the remote control as this may
damage the parts or lead to a malfunction.
• The operating distance may vary according to the brightness of the room.
• Do not point bright lights at the remote control sensor.
• Do not place objects between the remote control and the remote control
sensor.
• Do not use this remote control while simultaneously operating a remote
control of other devices.
Remote Control Preparation
• Install the batteries in the back of the remote control, ensuring to match up
the polarity markings (+/-).
• The batteries should last for around one year, depending on how often they
are used.
• If the remote control does not work when operated near the TV, replace the
batteries.
NOTE: Remove the batteries if the remote control is not going to be used for
a long time.
Pairing the Remote Control and the Receiver
If you get a new/replacement remote control, you will need to pair it with the
receiver.
1. Press and hold the OK button and the MUTE button for about three
seconds. The remote control light will turn on and then flash quickly, as it
enters pairing mode.
2. Turn on the USB receiver and wait for about three seconds. The
remote control light will turn on and flash three times. Once pairing has
successfully occurred, the remote control light will turn off.
vii
Contents
Welcomeiii
Remote Controliv
General Safety Instructions1
Installation4
Controls and Connections6
Getting Started13
Basic Operations16
Electronic Program Guide (EPG)18
Recording19
Smart TV22
Media Mode29
Menus32
FAQs49
Specifications 51
viii
General Safety Instructions
Read this manual thoroughly before first use and keep it in a safe place for
future reference, along with the completed warranty card, purchase receipt
and carton. The safety precautions enclosed herein reduce the risk of fire,
electric shock and injury when correctly adhered to.
Follow all instructions and take notice of all the warnings.
This product complies with Australian Safety standard AS/NZS
60065:2012 to ensure the safety of the product.
The lightning flash with an arrowhead
symbol within an equilateral triangle is
intended to alert you to the presence
of non-insulated dangerous voltage
within the product’s enclosure that
may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
The exclamation point within an equi-
To reduce the risk of electric shock, do not remove
the cover (or back).
This unit contains no user-serviceable parts inside.
Refer all servicing to qualified service personnel only.
IMPORTANT WARNINGS AND CAUTIONS
• Only connect this TV to a mains socket with a protective earthing connection.
• Do not change or modify the appliance in any way.
• Only use the attachments/accessories specified by the manufacturer.
lateral triangle is intended to alert you
to the presence of important operating
and maintenance (servicing) instructions in the literature accompanying
the product.
IMPORTANT INFORMATION
If the television is not positioned in a sufficiently stable location, it can be a potential
hazard and may fall. Many injuries, particularly those to children, can be avoided by
taking simple precautions:
• Use cabinets or stands recommended by the manufacturer of the television.
• Only use furniture that can safely support the television.
• Ensure the TV is not overhanging the edge of the supporting furniture.
• Do not place the TV on tall furniture (for example on a cupboard or bookcase)
without anchoring both the furniture and the TV to a suitable support.
• Do not place the TV on cloth or other materials between the TV and supporting
furniture.
• Educate children about the dangers of climbing on furniture to reach the
television or its controls.
1
General Safety Instructions (Cont.)
Installation
Follow instructions: Only install this TV set in accordance with the instructions in this
manual.
• This TV is equipped with standard wall-mounting points, and we recommend that
a wall bracket be installed between the TV and the wall to prevent the TV from
falling from a cabinet. (The bracket is not included.)
• When deciding on where to put the TV set, make sure the place is:
• Well ventilated, and away from damp and cold.
• Protected from overheating and away from direct sunlight.
• Away from moisture drips or splashes.
• Protected from excessive dust or grease.
• Bookcase: Do not install this equipment in a confined space such as a bookcase or
similar unit.
• Heat: Do not install the TV set near heat sources such as radiators, stoves or other
audio visual equipment (including amplifiers) that produce heat.
• Water: Do not place containers with liquids (such as vases) or with small metallic
objects on top of the unit. If liquid enters the unit or any metal object falls into the
unit, it may result in short-circuit, fire or electric shock.
• Fire or explosion: Do not use or store flammable or combustible materials near the
unit. Doing so may result in fire or explosion. Do not place any naked flame sources,
such as lit candles, cigarettes or incense sticks on top of the TV set.
• Antenna: Install the antenna away from high-voltage power lines and
communication cables and make sure it is installed securely. If the antenna touches
a power line, contact with the antenna could result in fire, electric shock or serious
injury.
• Ventilation: Install the unit at an adequate distance from the wall to ensure sufficient
ventilation. If the temperature inside the unit rises, it may result in fire.Electrical Safety
and Cord Handling
• Voltage: Before installing this TV set, make sure your outlet voltage corresponds to
the voltage stated on the appliance rating label.
• Protect from moisture: To reduce the risk of fire or electric shock, do not expose
this appliance to rain or moisture; do not use it anywhere near water; do not touch
the power plug with wet hands.
• Damage: Do not use a damaged power cord, plug or loose outlet. Doing so may
cause an electric shock.
2
General Safety Instructions (Cont.)
• Moving: When moving the unit, be sure to turn it off and unplug it from the wall
outlet. Moving the unit with the power cord connected to the outlet may cause
damage to the cord, resulting in fire or electric shock.
• Packaging: This product has been packaged to protect it against transportation
damage. Unpack the appliance and keep the original packaging carton and
materials in a safe place. It will help prevent any damage if the product needs to be
transported in the future, and you can use it to store the appliance when it is not in
use.
• Batteries: When removing the batteries from the remote control, make sure to keep
them out of reach of infants and children. Seek medical attention immediately if a
child has swallowed a battery. Please dispose of batteries responsibly by recycling
at your nearest recycling centre.
WARNING!
Batteries must not be exposed to excessive heat such as direct sunlight,
fire or other souces of heating.
• Usage restriction: This product is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision or instructions concerning
use of the product by a person responsible for their safety.
• Children: Supervise young children to ensure they do not play with the TV.
Cleaning and Maintenance
• Unplug: To reduce the risk of fire and electric shock, always unplug the TV before
cleaning.
• Cleaning: Only use a soft, dry cloth for cleaning the TV; do not use a damp
cloth. Never clean with industrial strength polish, wax, benzene, paint thinner, air
freshener, lubricant, detergent or other chemicals. Wipe off any moisture, dirt or
dust on the power plug pins with a clean, dry cloth.
• Repair: If the unit requires repair, contact the after sales support line; never
disassemble or modify the unit or attempt to service it yourself.
• Service: Refer all servicing to qualified service personnel. Servicing is required
when the TV has been damaged in any way, such as when the power supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the TV, when
the TV has been exposed to rain or moisture, does not operate normally, or has
been dropped.
3
Installation
Your TV is packaged with the two stand legs separate from the cabinet.
Before using the TV, install the stand as described below. Or if you want to
mount it to a wall, see the following page for mounting advice (the wall mount
itself is not supplied).
IMPORTANT!
• Make sure the TV set is unplugged from the power supply before
installing or removing the stand.
• The TV panel may be awkward to install on your own. We recommend
you ask someone to help with installation and/or removal of the stand.
Attaching the Stand
Step 1
Place a soft cushioned material on top
of a flat surface to prevent damaging the
screen panel. Then place the TV screen
flat on top, with the screen side facing
down, as illustrated on the right (1).
Step 2
Align the stand base to the installation
point, as illustrated on the right (2).
Step 3
Tighten the screws (supplied) with a
screwdriver to affix the stand to the
panel, as illustrated on the right (3).
CAUTION!
• Do not apply excessive force as this
may damage the screw holes.
• Unplug the power plug first when
installing or removing the TV Stand.
• To avoid any damage to this TV, we
recommend you ask someone to
help with installation and/or removal
of the stand.
4
Installation (Cont.)
Wall-Mounting Instructions
IMPORTANT!
• Make sure the TV set is unplugged from the power supply before
removing the stand and mounting it to a wall.
• We recommend you contact a professional for assistance when wallmounting the TV. We assume no liability for any damage to the product or
injury to yourself if you mount the TV.
• The TV set is equipped with holes on the back panel for use with wallmounting brackets (not included). Please use the illustration below as a
reference when buying wall-mounting brackets.
• Use four standardM6*12mm screws (or longer, depending on the mounting
bracket) to mount this TV.
Back of the TV
NOTE: The screws in the package are for securing the TV stand only. If you are wall-
mounting the TV, please consult a professional installer for further instructions
on bracket support and wall support.
5
Controls and Connections
Front View
3
5
67
1. LCD Display Screen
2. IR (infra-red) Sensor for Remote Control
Power Indicator: In standby mode the indicator light is red; when switching on
the unit the indicator light will illuminate blue.
3. VOL + / - : Increase/decrease the volume level or move left/right.
4. CH + / - : Select the next/previous channel or move up/down.
5. MENU: Enter the settings menu.
6. SOURCE: Select the input source.
7. STANDBY: Turn the TV On/Standby.
Back View
4
3
4
NOTE: See next page for a detailed description of all the sockets on the back panel.
6
Controls and Connections (Cont.)
Main Unit Back View Controls and Sockets
(AIR MOUSE)
(ANDROID)
(COMPONENT)(TV)
1A
ANT
(4K/ 60Hz)
HDMI 2
B
1
2
MICRO SD
3456789
(4K/ 30Hz)(4K/ 30Hz)
USB
(TV)
LAN
(ARC)
VIDEO
(AUDIO IN)(COMPOSITE)
12
3
11
3
10
5
1. POWER CORD: 1A: Model VPS75UHD, 1B : Model VPS55UHD
2. MICRO SD CARD INPUT (for Model VPS75UHD only):
3. USB: Connect a USB storage device to USB (TV) for PVR recording and
multimedia file playback.
4. LAN INPUT (Local-Area Network): For connecting to the internet.
5. HDMI 1 (ARC) / HDMI 2: Provides a digital video/audio connection
between the TV and any HDMI devices.
6. HEADPHONES OUTPUT: Connect your headphones via a 3.5mm
connector.
7. OPTICAL DIGITAL AUDIO OUTPUT: Connect to an external digital audio
device.
9. L-R AUDIO INPUTS: Shared with AV and Y/Pb/Pr video inputs.
10. ANTENNA INPUT: For connection of the external antenna.
11. Y/Pb/Pr INPUT (COMPONENT): Supports both SD (Standard Definition)
and HD (High Definition) picture quality.
12. USB FOR AIRMOUSE DONGLE
7
Controls and Connections (Cont.)
IMPORTANT!
Read through the instructions before connecting
the TV to other equipment.
Connecting to an AC Power Source
Main Unit
To Power Outlet
Connecting an External Antenna
For the best picture quality, we recommend connecting the TV set to an
external antenna.
Antenna
Outdoor
antenna
Indoor
antenna
amplifier
Power plug
of antenna
amplifier
amplifier
75Ω antenna
plug goes into
the antenna
port in the
back of your
TV
NOTE: At this stage, TV programming in New Zealand is not available in
Ultra HD. Therefore, the result of up-scaling and displaying HD broadcast
signals on a Ultra HD TV can be soft images, which don’t have the detail or
smoothness you see when watching the same content on an HD TV.
8
Controls and Connections (Cont.)
Composite Video (CVBS) Connection
MICRO SD
For a non high-definition
connection, use the composite
Audio L/R (white/red) and
video (yellow) cable to connect
the unit with other devices.
HDMI Connection
MICRO SD
USB
(TV)
USB
(TV)
HDMI Cable
(not included)
LAN
(ARC)
VIDEO
(AUDIO IN)(COMPOSITE)
AV Cable
(included)
LAN
(ARC)
VIDEO
(AUDIO IN)(COMPOSITE)
(AIR MOUSE)
(ANDROID)
Use a HDMI cable to connect the
unit with other devices to receive
high-definition multimedia signal.
(COMPONENT)(TV)
ANT
HDMI 2
9
Controls and Connections (Cont.)
USB Connection
Insert a USB memory device into the USB port for PVR recording,
time-shifting and playback of video/music/photo multimedia files.
MICRO SD
USB
(TV)
LAN
(ARC)
VIDEO
(AUDIO IN)(COMPOSITE)
HDMI 2
ANT
USB Device
(not included)
(COMPONENT)(TV)
(ANDROID)
(AIR MOUSE)
Optical (S/PDIF) Connection
Connect to an amplifier or other audio decoding devices for a high quality
digital audio connection.
MICRO SD
USB
(TV)
LAN
(ARC)
VIDEO
(AUDIO IN)(COMPOSITE)
(AIR MOUSE)
(ANDROID)
(COMPONENT)(TV)
ANT
HDMI 2
10
Use a optical cable to connect the unit with an amplifier or
other audio decoding device for optical audio signal output.
(Optical cable is not included.)
Controls and Connections (Cont.)
Component (YPbPr) Connection
MICRO SD
(AIR MOUSE)
YPbPr Component
(ANDROID)
Cable (not included)
(COMPONENT)(TV)
USB
(TV)
LAN
(ARC)
VIDEO
(AUDIO IN)(COMPOSITE)
AV Cable
(included)
ANT
HDMI 2
• Use a YPbPr component cable (not supplied) complete with green, blue
and red terminals to connect to your external device.
• For sound, use the white and red jacks on the supplied AV cable to connect
your external device to the TV.
11
Loading...
+ 43 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.