Vents-us TT 100, TT 125, TT 150, TT 200, TT 250 Installation Manual
...
www.ventsus.com
MIU_05-01
Bodor Vents, LLC DBA: VENTS-US
11013 Kenwood Road Cincinnati, Ohio 45242
Phone: (513)348-3853
e-mail: sales@ventsus.com
INLINE MIXED-FLOW FANS
TT 100/125/150/200/250/315
INSTALLATION GUIDE
INSTALLATION
Tools required
Pencil Drill Screwdriver Dowel (4 pcs.) Screws (4 pcs.)
MOUNTING
Fans may be mounted either vertically or horizontally. An air duct at least 40 inches long should be connected to an inlet ange in case of horizontal fan mounting; a canopy
should be installed on an inlet ange in case of vertical mounting. Outlet ange should always be connected to an air duct.
min 40 inch min 40 inch
Typical installation of the fan
www.ventsus.com
MIU_05-01
Bodor Vents, LLC DBA: VENTS-US
11013 Kenwood Road Cincinnati, Ohio 45242
Phone: (513)348-3853
e-mail: sales@ventsus.com
1) Disconnect the fan from power supply.
2) Deinstall the xing brackets.
3) Remove the fan from the casing.
4) Mark holes on the wall.
5) Drill the holes and insert the expansion anschors.
6) Fix the fan.
7) Install the fan into the casing
8) Connect air ducts
1
4
7 8
5
6
2
3
Loading...