User Guide
VDR-100
Vehicle HD Video Recorder
Innovative solutions in vehicle and mobile video technology
Please read and follow all instructions and features before use. Save for
future reference.
Manual Ver 09 17
1578 W. San Bernardino Rd. # E,
Covina, CA 91722 USA
www.ventrainc.com / info@ventrainc.com
Tel: 888 418 3833
Warning – Safety Precaution
Please read these safety instructions thoroughly before operating
the product and keep this manual for future reference.
Please be aware that micro SD memory card have limited product
life expectancy and will eventually degrade in time - causing errors in
recordings / data corruption.
It is highl y re commended to format and check the integrity of the
Micro SD card on a regular basis. Micro SD memory card related
problems are not under warranty and the manufacturer or the
supplier is not responsible for data loss or missing recordings.
Install the device in a manner that does not obstruct the driver’s
view of the front or sides of the vehicle , or interfere with the safety
of operating the vehicle.
Warning – Safety Precaution
Please compl y with all local, state and federal driving and traffic
regulations.
To reduce the risk of fire or electric shock, do not expose this unit to
water, liquid, rain or moisture.
Disconnect and replace cable if wire is stripped or damaged.
In the ev ent of an impact or accident, please c heck to ensure
the equipment is properly secured. Inspect the mounting bracket and
adhesive for any signs of damage.
Do not pu t foreign material into card insertion slot o f the terminal, it ma y
cause product damage.
The product is designed to be installed inside the vehicle. An y damage
When exposed to direct sunlight for extended period of time, th e
equipment m ay become hot. Please exercise caution when
touching the equipment.
Do not operate, adjust or view the VDR-100 while driving or when
vehicle is in motion as it may lead to accidents and or injuries.
Do not place the device insecurely on the dashboard, or place t he
device in front of or above an airbag.
Altering and disassembling of the product ma y result in a fire or
electric shock. Disassembling the product will void the warranty.
Inquire with Ventra in the event the product needs repair.
causedbyplacing
the
device
outside
the
vehicle,ordamage
due
to
misuse or handling of the product will void the warranty.
The warranty does not cover claims related to m ishandling, tampering
and / or disassembling of the product.
WARNING– IMPORTANT NOTICE
ADAS Feature
The ADAS (Advanced Driver Assi stance S ystem) is an image
and software based feature embedded by the processor
manufacturer which is NOT Ventra.
As with all technologies, the ADAS feature has limitations and
may not detect variations in vehicle operation and
environment.
Do NOT rely on t he ADAS feature as an alternative to proper
operation of the vehicle. The feature is NEVER a s ubstitution
for attentive driving at ALL TIMES.
Failure to focus on attentive drivi ng may l ead to accidents
which result in serious injury or death
Windshield Mounted Device Legal Notice
Please check and comply with ALL local, state and federal laws and o r
regulations regarding windshield mounted devices. Some state laws
prohibit drivers from using suc tion mounts on their windshield when
operating m otor vehicles. Other state laws allow the suction mount to
be mounted to be located only in specific loca tions on the windshield.
Numerous states have enacted restrictions against placing objects on
the windshield in locations that obstruct the driver’s vision.
IT IS THE USER’S RESPONSBILITY TO MOUNT VENTRA EQUIPMENT IN
COMPLIANCE WITH ALL PPLICABLE LAWS AND ORDINCANCE.
Audio and Video Recording Legal Notice
Certain local, state and federal laws may prohibit recording of audio and
or video in vehicles or public area, or without k nowledge and or consent,
please check and comply with ALL local, state and federal laws and
Built-In Shock Sensor
The built-in shock sensor may not recognize slight shock or
minor collision as an event. Different sensitivity levels may
be adjusted to match the level of sensitivity.
regulations.
Certain local, state and federal laws may require signage or display that
indicate recording of audio and or video in vehicles or public area.
Please check and comply with ALL local, state and federal laws and
regulations.
IT IS THE USER’S RESPONSBILITY TO USE VENTRA EQUIPMENT IN
COMPLIANCE WITH ALL PPLICABLE LAWS AND ORDINCANCE.
Use of this product other than its intended purpose is strictly prohibited.
Ventra Technology, Inc. does not assume any responsibility for any
fines, violation, penalties or damages that m ay be incurred as a result of
the use of the product.
Ventra Technology, Inc. is not responsible for any direct, indirect,
incidental or consequential damages, arising out of use, misuse or
inability to use of our products.
1 Intro ducti on
Ven tra VD R-1 00 is an all -i n-o ne hig h p erf or mance
Veh ic le HD V ide o Reco rder. T he p lu g a nd pl ay set up
mak es thi s s yst em an ide al choic e for bot h p as senge r
and co mmerc ial vehicl e.
1.1 Feat ures
* High Dynam ic Ran ge Im agi ng (HDR)
* Supe r HD 2304*1 29 6
* Up to 15 0 De gree W ide Angle Gla ss Lens & I R- Fil te r
* Bui lt -in G- senso r
* Mot ion Detec tion
* Emerg enc y R ecord ing File
* Advance d Dr iv er Ass is ta nce S ys tems (AD AS )
1.2 Pac ka ge Cont ent s
Cam era Bra cke t
1.3 Produ ct Overv iew
Car Cha rge r
MicroSD Card
Not e:
To opera te the came ra, pre ss the corr esp on din g buttons
(5, 8, 9, 10) ac cordi ng t o gu ide icons s hown on t he s creen .
Num ber ITE M Num ber ITE M
1 Brac ketS ocket 8 Up Bu tton ( )
2 Power Switch 9 Down Button ( )
3 Memor yCar dSl ot 10 Ente r Butto n( )
4 USB Con nector 11 Speak er
5 Bac k Butt on ( ) 12 Wide Angle Len s
6 LEDI ndicat or 13 M icro phone
7 LCD Panel 14 M iniH DMI
02 03
2 Gettin g Sta rted
2.1 Inser ting the Me mory Card
Ins ert the m em ory c ard w it h the gold con ta ct s fa ci ng the
bac k of the camcor der . Pus h the me mor y car d until i t cl ic ks
int o place.
To remove t he m em or y ca rd
Power o ff th e V DR -10 0 firs t, the n p ush to
eje ct the me mo ry card out of th e sl ot .
2.2 Insta ll ing in Vehic le s
2.2 .1 Mo unt t o wi nd shiel d
1. A tt ach the b rac ket to the camcorder.
Slide i t i nto the br ack et hol der until you
hea r a clic k.
2. Sele ct the lo ca ti on t o m ou nt
the VD R. Id eally in the c ent er
sec ti on of t he win ds hie ld .
Impo rtan t Note :
1.Do no t re move or in sert the m emor y ca rd w hen t he c amer a is
turne d on. This wi ll da mage t he memory ca rd.
2.It i s rec omm ended to use C lass 10 /U1 or a bove micro SD c ard.
3. Pl eas e form at t he micro S D card prio r to t he i niti al us e.
4.If the scre en shows “ Low Speed Card ” whil e r ecor din g, this
means the w riti ng speed of th e memo ry car d is t oo s low. P leas e
repl ace it with a hi ghe r-s pee d memory card.
5.If “Card i s to o fr agm ent ed” is d ispl aye d while re cor din g, it
means the c ard i s unab le t o sa ve t he re cor din g. Plea se ma ke a
copy of exis tin g files i n the car d and then r efor mat it in the
VDR- 100.
3. Befo re ins ta ll ing the b rac ke t,
ple ase use alco hol to cl ean the
windsh ield and suct io n cup of t he
bra ck et. W ait fo r it to dr y and
pre ss s uc ti on- cu p on the
windsh ield.
4. Hold the bas e firml y on t he
windsh ield and pr es s down the
cla mp to m oun t the car hol de r to
the win dshie ld. M ak e s ure the
bas e is se cu rel y lo ck ed in pl ace.
04 05
2.2 .2 Adju st t he ca mc ord er p os iti on
1. Loo se n the kno b to swivel
the dev ic e ve rt icall y or
hor izo nt all y.
2. Ti gh ten the k nob to
mak e sure the came ra is
sec ur ely lo ck ed in place .
2.3 Con ne cti ng Po wer
Use o nly the s up pli ed c ar adap ter to power up t he
2. Plug the ot he r end of t he car ch arg er to the cig arett e
lig ht er s ock et of t he ve hic le . Onc e the veh icle e ngi ne is
sta rt ed, the c am er a auto ma ti cally t urns on. Car cha rger
inp ut: DC 12 / 24V.
Impo rtan t Note :
1.Us e the pr oduc t with t he su ppli ed cha rge r only. Do N OT use
other p ower charge rs to avo id camer a damag e or cause ba tte ry
explo sio n.
2.W hen u sing th e V DR-100 for th e fi rst t ime, plea se fully c harge
the camera batt ery.
3.Pl ease not e if th e en vironm ent temp eratu re r eaches 113° F
or abo ve, the ca r ad apt er will c onti nue to sup ply power to
VDR- 100, bu t wi ll n ot char ge the Lith ium -ion batter y f or safe ty
reaso ns.
Bat tery St at us Ind ic ator
cam er a
and
cha rge
the
bui lt-in
batt ery
.
1. Conne ct one en d of the c ar ad ap ter to the USB
con necto r of t he VDR-1 00.
USB por t i npu t: DC 5V / 1A.
Ico n
Des crip tion
Ful ly char ged
75% cha rged
50% cha rged
25% charg ed
Low bat tery
Conn ect the ca r adapter
to ch arge the ba tter y /
Batt ery is full ych arg ed.
06 07
2.4 Batte ry Status Indicat or
Icon Descr ipti on
Gre en
LED L ight Off
Gre en
LED L ight Off
Power off, ba ttery char ging
Power off, ba ttery fully Char ged
Power on, bat tery chargi ng
Power on, bat tery full y charged
Reco rding/ Record ing an d screen o ff Blink ingR ed
2.5 Powering the Camcorde r On / Of f
2.5 .1.1 P ow er On
Sli de the Po wer S witch down t o the
ON po si ti on. T his ac tion wi ll cov er
par tofthe
mem ory
car d
slo t
.
2.5 .2 Se t the D ate and Ti me
To set the d at e and time, do the fol lo win g:
1. Pr ess the but ton to enter the
on- sc ree n d is play (OSD ) menu .
2. Pr ess the butt on to sele ct
Dat e / Ti me an d press
the butt on.
3. Pr ess the but ton to adjust
the val ue and p res s the but ton
to m ove to ano th er field .
4. Repea t st ep 3 u ntil the date an d t im e set ti ng is
Com pl ete
.
3 Using the VDR-100
3.1 .1 Rec ord vi deos w hi le driv ing
When th e v ehi cl e en gi ne start s up and the A utoma ti c
par tofthe
mem ory
car d
slo t
.
2.5 .1.2 P ow er Off
Sli de the Po wer Swi tc h up to t he OFF
pos it ion . B ef ore re mo vin g th e
mem ory c ard , pl ea se wai t u ntil
powe r- off s equen ce is c omple te d
and the sc reen t urns o ff. Do n ot
rem ove me mor y ca rd dur in g poweroff se que nc e to preve nt vide o los s or
file corr up tion.
2.5 .1.3 R ese t t he camcord er
On rar e oc ca sions , the V DR -10 0 may
expe ri enc e an e rror f or unk no wn
rea son s. In th is cas e, pleas e pres s
OK butt on for at lea st 8 sec on ds t o
tur n of f th e camer a.
Rec ord
fun ct ion
is
ena ble d,
the
VDR-100
aut om atica ll y
tur ns on a nd s ta rts rec ord ing. R ecord ing wil l autom at ic ally
sto p whe n the en gine i s s wit ch ed off . Or press t he but ton
to s top re cordi ng manua lly.
Not e: On ce rt ain v eh icl es, t he cigar ett e lig ht ers are
con sta ntl y ON (Ho t) so the rec or di ng wil l c on tin ue w hen t he
eng ine is s wit ch ed of f. If t his happ en s, pl eas e man ual ly tu rn
off the c amera or r emo ve t he c ar a da pte r fr om t he ci gar ett e
lig hte r.
3.1 .2 Reco rd al l ot he r type s of vid eo s
1. Pr es s the but ton to st art reco rding .
2. Pr es s the butto n to st op recordi ng.
Not e:
1.Cam era ca n be c on figur ed to s ave a vide o fil e for e ver y
3 or 5 minute s of reco rd ing s eg men t.
2. If t he me mo ry ca rd ca pac ity is ful l, th e ol des t fil e in
the mem or y ca rd w ill be ov erw ri tt en.
08 09
3.1. 3 E merge ncy Rec ordin g
Durin g V ideo Recor di ng, pres s the
butt on to enter
eme rg enc y recor di ng m ode.
The “ Em erg ency” mess age
will be shown im me dia tely on
the upp er l eft c orne r of th e sc reen,
and t he r ec ord ed f ile will
be pro te cted. To stop t he re co rdi ng, press the
But to n.
Not e:
1.If the Col li si on Det ec ti on f un ct ion is e nabled and a
col li sio n is de tec ted, the c amc order wil l aut omati cal ly tr ig ger
the em er gen cy re co rd ing . The r eco rd ing wi ll la st 20 s ec ond s
aft er coll is ion .
2. The e me rge nc y rec or din g fil e is cr ea ted as a ne w file,
whi ch will be p ro tec ted to avo id being ov er wri tt en by n orm al
cyc le r eco rd in g.
3.1 .5 Taki ng Snapsho t
You can als o u se this c am era to
tak e s nap sh ots of th e c urren t
sce ne . Fr om the st and by scre en,
pre ss th e butt on to take a
sna ps hot .
Num ber Ite m Des cript ion
1 Rec ordin gDu ratio n Ind icat es th e re cord ing durat ion.
2 Date andT ime I ndic ates cur rent r eco rding da te and t ime.
3 Gui de Ico n(M enu ) Press the bu tton t o ente r the OSD men u.
4
Guide Ic on
(Pla yba ck)
Pres s the bu tton t o swit ch to Playb ack m ode.
5 Battery Ind icat es rema ining b atter ypo wer.
6 Guide Icon (Sto p) Pre ss the b utton to sto p the r eco rdin g.
7
Guide Icon
(Em erge ncy)
Pres s the button t o con tinu ously recor dth e em erge ncy
video in one f ile unt il the r eco rding is m anu ally s topp ed.
The a le rt m essag e of “ Em er gen cy f il es a re f ull ” w ill p op
up on th e s creen wh en the eme rg enc y reco rd ing fil es are
ful l. Us er will nee d to ma nu all y de le te th e em er gen cy fil es
in the me mor y ca rd to re co rd new e mer ge ncy f ile s.
3.1 .4 The Recor di ng Scree n
Not e:Ifrec ord in g
isinpro gre ss ,
pre ss th e butt on to s to p the rec ord in g fi rs t.
3.2 Playback Vi deos and Photos
3.2 .1 Playin g V id eos/ V iewing Phot os
To play v ide os , do the fol lowin g:
1. If re co rdi ng i s in pr ogr es s, p ress
the but ton to sto p rec or ding.
The stand by s cr een is displ ayed.
but ton to enter the
2.P ress the
OSD menu .
3. Pr es s the
but ton to sel ect
Fil e Pla yback and pres s the Button.
but ton to se lec t Video or E me rgenc y
But to n.
but ton to br ows e fo r the des ir ed vi deo fi le
4.P ress t he
and pre ss the
5.P ress t he
and pre ss the
but ton to play the video .
10 11
Note: Wh en t he V DR- 100 i s recor din g, pre ss ▼ b utt on
to s top reco rding , the n pres s ▲ b utt on, y ou c an dir ec tly
ent er Pla yb ack mode . T he las t r eco rd ed vi de o is
dis pl aye d on th e screen.
3.2 .2 The Pl ayba ck Scree n
Pho to Playb ack Scree n Video Pla yback Sc reen
6. Pr ess the but ton to pau se th e
pla yba ck . Pr es s it aga in to res um e.
3.2.3 DeletingFiles
To delete file(s), do thefollowing:
1.If recording is in progress, press
the button to stoprecording.
1.Pressthe button to enter the
OSDmenu.
3. Press the button toselect
File Deletion and press the button.
4. Press the button to select the
file category and pressthe button
5. Press the button to selectthe
file that you want to delete and press
the button toenter the Delete menu.
6. Press the button to select an
Option.
7. Pr ess the b ut ton to co nfirm dele te .
Imp ort ant Not e: De le ted f ile s can not be r ec ov ered. En su re
the f ile s hav e backu p befor e de let io n.
Numb er Item Descri ption
1 Date and time In dicates the record eddate and time
2 Stamp Pri nt
Indi cates the fil en ame, date and t ime stamp if it was
enabl edi nt he Settin gsm enu
3 Guide icon (Back )
Press t he but ton to retu rn to file select ion
display
4 Guide icon (Prev ious) Pre ss the bu tton to vi ew the pre vious
vid eo/photo.
5 Guide icon (Next )
6 Guide icon (Paus e)
7 Total recorde dtim e
Press the butt on to view the next vi deo/phot o
Press t he button to pa use thev ideo play back
Indi cates tot al record edtim e
8 Current Dura tion I ndicat es the elaps edtim e
9 Batter y Indicat es the remai ning batt eryp ower
ite m De scr ipti on
Del ete One Dele te th e cur rent fi le.
Del ete All Del ete a ll file s.
12 13
4 Adju st ing th e Sett in gs
4.1 Usi ng the Menu
Cus tomize video r ec ord in g and ot he r gener al set ti ng s via
the o n-s cr een displ ay (O SD ) menus .
4.2 Menu Tree
Ref er to the ta ble fo r de ta ils on menu i tems and
ava ilable me nu opt ions.
Menu I tem D escri pti on Ava ilabl e opt ion
File Pla ybac k Select the file ca tego ry that you
want t o view
Norm al Vide o / Emer gen cy
Date / T ime S et the date and t ime Press / butt on to
adjus t the valu e, pres s the
butt on t o swit ch t he field and
conf irm
Time St amp Enabl e/Di sab le the date s tamp . On / Off
Video R esol utio n Set th e vide o res olu tio n 2560 X 1080 P3 0
2304 X 1296P 3 0
1920 X 1080P 30 HD R
1280 X7 20 p6 0
Photo Resol uti on Set the photo reso lut ion 13M (480 0 X 27 00)
9M (40 00 X 2 250)
4M (26 88 X 1 512)
Image Qualit y Set d iffe rent imag e qu ality for
the reco rdin g video s
S.Fi ne/ Fin e/ Norm al
EV Se t th e exp osu re co mpe nsat ion Pres s / but ton to set the
expos ure l evel. You may
cust omiz eitbetw een-2.0~+2.0
1.If rec or din g is in pr ogr es s, pre ss t he bu tt on to stop
rec ord in g.
2. Pr es s the but to n to en te r the OSD m enu .
3.P ress the but ton to se lec t a m enu optio n and pre ss
the bu tt on to e nt er th e se le cted menu .
4.P ress t he b utton to se le ct the de si red setti ng s an d
pre ss the bu tt on to co nf irm the sett in g.
.
5. Pres s the bu tton t o ex it the me nu.
cust omiz eitbetw een-2.0~+2.0
ADAS Det ect E nable /Dis ab le On /Off
LCD Set ting Set the dur atio n f or the di spla y to
auto mati cal ly turn off after
video r ecor din g start s
On / T urn O ff Af ter 30 sec. /Tu rn
Off Af ter 3 m in. / O ff
Voice Rec ord Enab le/ Disa ble t he voice
reco rdin g
On /O ff
Beep En able /Dis abl e the beep s ound
when nav iga tin g t he VDR- 100
Press / butt on to set th e
volum e. You may cus tomi ze it
betw een 0 ~ 5
Recor d Inter val Set th e rec ordi ng dura tion for
each reco rde d vid eo f ile segme nt
3 min ./ 5 min.
Moti on Det ecti on If Mo tio n D etec tion i s acti vate d,
the VDR- 100 will aut oma tic ally
trigg er recor ding wh en the
came ra dete cts any m otio n in
front . W he n th e bat ter y is f ully
char ged and is
in go od cond iti on, Mot ion
Detectio n can record continuousl y
On / Off
15
14
VDR-100 Sp ec ificati on s
Colli sio n Detec tio n
(Shoc k Sens or)
The buil t-i n shock s ensor w ill
detec t the leve l of impac t base d
on t he sett ings . VDR -10 0 w ill
auto mati cal ly tr igger em erge ncy
reco rdin g when cor res pon din g
level of shoc k is d etec ted
Off /Low/ Med ium /Hig h
Freq uenc y Red uce f licker on LCD . A uto/ 6 0Hz/ 50Hz
Lang uag e Set t he OS D men u la ngua ge.
Engli sh, Deu tsch , Fran çais ,
Itali ano, Es paño l,
Port uguê s,T ürkç e, Polski
File D eletion Delet e the file( s). Video /E merg enc y
Form at
Form at the mem ory c ard inse rted i n
the d evic e. A ll the files in th e car d wil l
be eras ed.
Yes /N o
Defa ult
Reset all s etti ngs to fa ctor y def aul t
setti ngs .
Yes / No
About Fir mwar e Vers ion
Ite m Des crip tion
Im ages ensor 1/3 ” CMO Ssen sor
Ef fectiv ep ixel s 268 8( H) x 152 0 (V)
Sto rage me dia Sup port M icro S DHC, up to 6 4GB c lass 10
ora bov e
LCD dis play 2.4 ”L CD co lor T FT (262 K pix els)
Len s Wide An gle Fi xed Foc us le ns
F/2 .0, f=2 .6mm
Foc usr ange 0.5m~ Infi nity
Vid eo (F orma t:M OV) Resol utio n: WF HD (256 0 x 1080 ), 30f ps
Sup er HD (2 304 x 129 6), 30 fps
Ful l HD (19 20 x 108 0), 30 fps HD R
HD (1 280 x 72 0 ), 60fp s
Sti lli mage
(Ph otog raph ) (For mat: DC F
(JP EG))
In Pho to mo de, av aila ble res olut ions a re
av ailab le from digi tal en hanc ement :
13 Me gapix el (48 00 x 270 0)
9 Mega pix el (400 0 x 2250)
4 Mega pix el (268 8 x 1512)
Cer tain f eatu res and sett ings may chan ge due to c onsta nt
pro duct enh ance ment.
Ven tra re serv es the right to ch ange speci ficat ion wi thout prior
Shu tter Ele ctro nic shut ter
Aut o:1/ 2 ~1/ 2000 sec.
G-S enso r 3-Ax is G-F orce se nsor
ISO Aut o
Wh iteB alanc e Aut o
Mic roph one Yes
Spe aker Yes
Con nect ion Mi niU SB
Bat tery Bu ilt- in 470m AH Li -po lymer rec hargeab le (This
bat tery is NOT r epla ceab le)
Ope rati ng
Tem perat ure
32° ~ 120 °F
Ope rati ngH umi dity 20 ~ 7 0%R H
Sto rage
Tem perat ure
-2° ~ 155° F
Dim ensi ons 65 x 70 x 27. 5m m
We ight A pprox . 80g (w itho ut me mory ca rd)
16 17
Ven tra re serv es the right to ch ange speci ficat ion wi thout prior
not ice.
5 View Rec ordings on PC
5.1 Usi ng Media P layer
VDR -10 0 vid eos a re sa ved as MOV f il es and c an be
vie wed vi a st and ard Med ia Pl ayers .
To vie w r ec ord in gs:
1. Saf el y r em ove the Mem or y c ar d f ro m t he VDR- 100
aft er it ha s bee n po wer ed off.
2. Ins ert Memory ca rd to a comp ut er. A S D car d slot
is r eq uir ed.
3. Sel ec t t he Dr ive t he SD c ard is l oc ated and s el ect
the file fold er to v iew (Nor mal / Em er gency ).
Dat e a nd T im e St am p a re wa terma rk ed if f eat ur e i s
ena ble d.
4. Sel ec t t he fi le to view via Media P lay er.
.
19
18
VENTRA LIMITED WARRANTY
Ventra Technology, In c. warrants the system against defects in material and
workmanship for a period of one (1) year from the date of original purchase.
During this period, Ventra’s l iability for any defective product, or any product part,
shall be limited to the repair or replacement of the product, at Ventra’s sole
discretion.
This warranty does not apply to defects or damages re sulting from mishandling,
accident, abuse, ne gligence, lightni ng, water/liquid, power surges, improper
interfacing, operation o utside of design li mits, misapplication, improper repair, or
unauthorized modification.
The term " Ventra Product" is limited to the hardware co mponents and required
firmware. It DOES NOT include software appli cations or programs, non-Ventra
products or peri pherals. To the extent permitted by local law, a ll non-Ventra
products or non-Ventra branded peripheral s - such as external storage SD card
are provi ded with the respective manufacturer's own warranties directly to you,
and are not covered by this Limited Warranty.
The information i n thi s specifi cation sheet reflects the current
technical specifications at the time of print. Ventra reserve the right to
change th e techni cal or physical specifications and featur es without pri or
notification.
While every effort has been made to ensure the accuracy of the information,
certain specifications are based on approximate figures.
All trademarks, service marks, trade names, product names and logos are the
property of their respective owners.
Ventra Technology Inc.
T: 888 418 3833 Web: www.ventrainc.com Email: info@ventrainc.com
20 21
To
obtain
service
within
the
warranty
period,
please
contact
Ventraat(
888)418
3833 or tech@ventrainc.com for assistance. If product repair or repl acement is
necessary, a Return Merchandise Authorization (RMA) wil l be issued. The
Customer will be solely responsible for shipping char ges, insurance and proper
packaging to prevent breakage i n transit, whether or not the product i s covered by
this warranty. All shipments of repaired or replaced products by Ventra wil l be
F.O.B. California.
VENTRA MAKE S NO OTHER WARRANTIES, EXPRESS OR IMPLIED, AS TO
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF ANY
PRODUCT SOLD UNDER THIS CONTRACT. UNDER NO CIRCUMSTANCES
SHALL VENTRA BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL,
PUNITIVE OR CONSEQUENTIAL DAMAGES INCLUDING, WITHOUT
LIMITATION, INFRINGEMENT OF THIRD PARTY RIGHTS, LOST GOODWILL,
LOST REVENUES OR PROFITS, WORK STOPPAGE, DAT A LOSS, SYSTEM
FAILURE, IMPAIRMENT OF OTHER GOODS, COSTS OF REMOVAL AND
REINSTALLATION OF THE SYSTEM, LOSS OF USE, INJURY TO PERSONS
OR PROPERTY ARISING OUT OR RELATED TO THE SYSTEM WHETHER
BASED ON BREACH OF WARRANTY, BREACH OF CONTRACT, TORT OR
OTHERWISE. IN NO EVENT SHALL VENTRA’s LIABILITY EXCEED THE
ACTUAL PURCH ASE PRICE OF THE SYST EM WITH RESPECT TO WHICH
ANY CLAIM IS MADE.
Loading...