Vent-A-Hood XLH12-236B SS SPECIFICATIONS

WALL MOUNTED SPECIFICATIONS

Model Number: XLH12-236B SS

Special Notes: LED lights. This model is not available with heat lamps. This model is available in stainless steel only. Optional finished duct/duct covers
are available in standard and custom sizes.

WIDTH: 36"
DEPTH: 21"
HEIGHT: 12"
CFM: 600
SONES: 6.5
AMPS: 4.0
# LIGHTS: 2

Hood with optional

10" x 10" duct cover.

Hood with optional

duct collars

and finished round

duct.

Hood with optional

square duct

collars and finished

round duct.

CONNECTION DIAGRAM

600 CFM B200 Dual Blower(Top View) (Front View)

Finished Round Duct

(two required)

Note: Top end of finished

round duct is crimped to allow

for duct connection in the

ceiling (crimp is not included

in the overall height of the

finished round duct).

Round Duct Collar

10" x 10" Square

Duct Cover

Square Duct Collar

REC. MOUNTING HEIGHT*

* Exceeding recommended

mounting height may compromise

performance.

ELECTRICAL/MECHANICAL SPECIFICATIONS FOR BLOWER UNIT

MODEL VOLTS AMPS+ HZ RPM CFM SP@0.0" EQUIV CFM$ CFM SP@0.1" CFM SP@0.2" CFM SP@0.3"

B200 Dual 115 4.0 60 1550 600 900 531 480 430 8" (50 sq. in.) 6.5

MIN. ROUND

DUCT SIZE

SONES#

+ This model is equipped with LED lighting: (2 lights: 30" - 36").
$ Because the Magic Lung blower uses centrifugal filtration rather than conventional baffle or mesh filters, the Magic Lung blower can handle cooking
equipment with higher cubic feet per minute (CFM) requirements and can deliver equivalent CFM much more efficiently than other filtration systems. When
comparing the Magic Lung with other blower units made by other manufacturers, use the "Equivalent CFM".

# Ratings in accordance with the Standard Test Code by the Energy Systems Laboratory of the Texas Engineering Experiment Station.

Specifications Subject To Change Without Notice