Venset TS700A, TS1000A Installation Instructions Manual
Electric TV Lift, TS700A & TS1000A
1
WARNING
WARNING: FAILURE TO COMPLY WITH OR OBSERVE ALL
ASSEMBLY, SAFETY AND OPERATION INSTRUCTIONS
AND WARNINGS REGARDING THE USE OF THIS PRODUCT MAY RESULT IN SERIOUS BODILY INJURY.
No. #324360.6
TS1000A
TS700A
Load with
min. 5 kg
INSTALLATION INSTRUCTIONS
CONTENT:
1. Important safety instructions.
2. Specifications and main dimensions.
3. Anti squeeze – auto reverse function (ASAR).
4. Parts included.
5. Installation.
6. RF remote system.
7. Feature functions and settings including anti-squeeze.
8. Adjusting the stroke length of the lift.
9. Declaration of conformity.
Electric TV Lift, TS700A & TS1000A
2
CAUTION !
Before you begin any of the Installation procedures on page 8, read and follow the
warnings and safety instructions on page 2 and 3.
WARNING !
THIS IS NOT A TOY !
CUSTOMER WARNING !
This appliance is sold as a component and should be installed only by a capable adult.
It should not be operated by children under 8 years old.
Operation by persons of reduced physical, sensory or mental capabilities or with lack of
experience and knowledge or by older children should only be allowed
if they are given supervision or adequate
instruction to use the appliance in a safe way and understand the hazards involved
WARNING !
This is a class III appliance and shall only be used together with a SELV pro-
tected type power supply unit with 29Vdc, min. 100W and an overload
current of at least 9A
1. Important safety Instructions.
Waste disposal
Do not deposit this equipment with the household waste. Improper disposal can harm both
the environment and human health. For Information about waste collection facilities for used
electrical and electronic devices, please contact your city council or an authorized company
for the disposal of electrical and electronic equipment.
Symbol explanation
Class III appliance, designed to be powered from a Safety Extra Low Voltage
power source (SELV)
CE marking, declaration that the product meets the requirements of the
applicable EC directives
Waste Electrical and Electronic Equipment
Electric TV Lift, TS700A & TS1000A
3
Safety guidelines
Use the following safety guidelines to help protect your lift from potential damage and to
ensure your own personal safety.
Read all the installation instructions before testing or installing your lift.
Read and follow all safety instructions.
The remote control and rocker switch should only be accessible to people in compli-
ance with the “Customer Warning” on page 2.
To prevent bodily injury keep hands and clothing away from the lift while the lift is in
operation.
Before installing the lift or working with its connections, unplug the lift from the elec-
tricity main supply.
Do not install the lift, power supply or R.F. module in places subject to high tempera-
tures for example near a radiator, or heating vent.
The TV lift must only be mounted in a dry area and it must be ensured before use that
the lift is safe or protected from liquid contact or spillage.
To avoid damaging the power supply, R.F. module and power cord, do not put any-
thing on it or place it where it could become damaged.
Unplug the lift in the following conditions:
When the power cord or plug is damaged or frayed.
If the lift, power supply or RF module has been exposed to rain or wa-
ter or any liquid contamination whatsoever.
If the lift exhibits a distinct change in performance, indicating a need
for attention.
MANUFACTURES who build this lift into other products or use it with other products,
MUST make sure to prevent bodily injury. The MANUFACTURER of the final product
is responsible to give the end user proper warnings and instructions for use.
Electric TV Lift, TS700A & TS1000A
4
Materials and weights:
Steel, black powder coated - Weight ~ 17/23 kg
Max. working loads:
65 kg (by standard installation)
29 kg (when lift is mounted upside down)
100 kg peak load
Duty cycle:
10% by 50% of working load or max 2 min. continuously
Operation:
Remote and rocker switch
Voltage:
Standby Consumption:
100-240 VAC / 50/60Hz
< 0,15 Watt
Above specifications may vary depending on local temperature, humidity and input voltage.
VESA, TS700A:
400x400, 400x200, 400x100
300x300 (see venset.com for
mounting instruction)
200x200, 200x100
100x100
2. Specifications and main dimensions.
Main dimensions, TS700A [mm]:
Electric TV Lift, TS700A & TS1000A
5
VESA, TS1000A:
600x400, 600x200, 600x100
400x400, 400x200, 400x100
300x300, 200x200, 200x100
Main dimensions, TS1000A [mm]:
Electric TV Lift, TS700A & TS1000A
6
3. Anti squeeze – auto reverse function (ASAR).
THE FACTORY DEFAULT SETTING OF ASAR = OFF.
The system can be set to ‘ON’ for the downward stroke only, either for upside up or upside down in-
stallation. See page 12 for instructions.
The anti-squeeze incorporates auto-reverse. Once it is set to ‘ON’ then if the lift hits an item
or gets trapped on the downward stroke, it will automatically reverse back up approximately
3cm and then stop. The pressure/squeeze given before reversing is approximately equal to
the weight of the TV that is mounted.
A lift run without the minimum 5kg load added will cause the system to trip out.
This can be reset in 2 ways;
a) For a lift with ASAR ON ‘upside up use' - Press down hard on the lift while operating the manual
switch downwards.
For a lift with ASAR ON ‘upside down use’ - Push up hard on the lift while operating the manual switch
upwards.
or if this is unsuccessful.
b) Move Jumper from the JP2 pins back to the OFF pins, run the lift and move the Jumper
back on the JP2 pins.
The decision to set ASAR ON or OFF depends on the type of installation. The customer
would always decide.
An example where it is switched on could be above a kitchen work top where should it hit
something left on the work top when lowering then you want it to stop and reverse automatically to release the trapped item.
Loading...