Venitem Mini Doge F24 User Manual

MA-SI-F240-01-04 Manual Mini doge F24 eng rev4 Rev.4 Page 1 of 2
INDOOR FIRE SIREN
SUPPLEMENTARY INDOOR SIREN
MINI DOGE F24
Features:
Connection:
Connect the main output with “polarity inversion” to one of the positive terminals (the siren will perform a particular sound according to the terminal connected) and to negative terminal (see pic 1). Connect the end of line R resistor between GND and terminal 1 or 2 or 3 or 4. The value of this resistor is indicated in the installation manual of the main.
Pic.1
Installation:
To open the siren insert a screwdriver in the hole indicated by the narrow (see pic.3). Fix the Mini Doge on the wall through the 4 fixing holes on the siren base (see pic.2). Use an adapter to connect all cables in case of a system with external tubes.
Pic.2 Pic.3
FINING HOLES
MA-SI-F240-01-04 Manual Mini doge F24 eng rev4 Rev.4 Page 2 of 2
165°
135°
105°
75°
45°
15°
Base
Sound Level:
Technical features of the optical-acoustic fire device:
Nominal power supply tension (Vn) 24 Vd.c. (from 22 Vd.c. to 28 Vd.c.) Max current consumption at Vn 37 mA Power 1,4 W Sound Level (standard model) See tab.1 Protection level IP41C Operating temperature From -10 °C to +55°C Continuous sound frequency 1800 Hz Intermittent sound frequency 1900 Hz Tri-tonal sound frequency 2200 Hz / 1800 Hz / 1500 Hz Bi-tonal sound frequency 2000 Hz / 3500 Hz Type A: For indoor use
EN 54-3
Technical data: see manufacturer technical design dossier
Note: if one or more of the above topics are not respected, approval will be not valid anymore.
Warranty: All Venitem products have 2 year of guarantee. With the aim of improving design and
quality of its products, Venitem reserves the right of modify them without any notice. All defective products have to be returned to your own supplier.
Angle
Sound level at 1 m
15°
96 dB(A)
45°
99 dB(A)
75°
101 dB(A)
105°
101 dB(A)
135°
99 dB(A)
165°
96 dB(A)
Tab. 1
09
0051-CPD-0159
Loading...