Venini V4GC6, VECG6003, V3G1WC6, VECG6004, VECG6006 User And Installation Instructions Manual

GAS HOBS

USER AND INSTALLATION

INSTRUCTIONS

Dear Customer,

Congratulations on purchasing your new product from Think Appliances.
To register your parts and labour warranty (some conditions apply please refer to your

warranty card for more details) please contact out Customer Care team on:
1800 444 357
Our Customer Care centre is there to ensure you get the most out of your appliance. For

example, should you want to learn more about recommended cooking temperatures, the
various cooking functions available, how to set and program your LED clock, and importantly
taking care of your appliance when cleaning, please call us because we are here to help you.

It is important that you read through the following use and care manual thoroughly to
familiarize yourself with the installation and operation requirements of your appliance to
ensure optimum performance.

We also carry a complete range of spare parts for all Think products. For all your spare parts
enquiries please contact our team at Pronto Parts on:

1300 306 973

Again, thank you for choosing an appliance brought to you by Think Appliances and we look
forward to being of service to you.

Kind regards

Management

Think Appliances

For future reference please record the following information which can be
found on the Rating Plate and the date of purchase which can be found in the
invoice:

Model Number …………………….

Serial Number …………………….

Date of Purchase …………………….

CONTENTS

General Information page 4

Warning and Safety Instructions page 5

Instructions for Use pages 6–7

Instructions for Installation Pages 8–12

Technical Data Pages 12–13

3

GENERAL INFORMATION

Please read this booklet thoroughly before you use this appliance. It is important that you
understand all the control functions before commencing to cook with your new appliance.

Please remember the advice and warnings shown on page 5, which is headed
‘IMPORTANT – Warning and Safety Instructions’.

This appliance is designed for domestic household use when built into a kitchen worktop.
NOTE: The housing, adjacent furniture and all materials used in the installation must be able to
withstand a minimum temperature rise of 85qC above ambient during periods of operation. This
information is for guidance only and the actual withstand temperature will depend on the
performance rating for the surface finish of the worktop.
Certain types of kitchen furniture surface finishes are particularly prone to heat damage or
discolouration at temperatures lower than the above guidelines.
Installing the appliance in contravention of the guidance given, will be at the liability of the
owner.

The use for any other purpose or in any other environment without the express agreement of the
supplier, would invalidate any warrantee or liability claim

Your new appliance is guaranteed against electrical or mechanical defects subject to certain
exclusions noted in Conditions of Guarantee.
The aforegoing does not affect your statutory rights.

In the event that you require any After Sales Service or advice, please contact the Service
Department on telephone number – 1800 444 357.

Before using this appliance ensure that any protective packaging or coatings have been removed.
To aid the protection of the environment, please sort the packing materials into different types
and dispose of them in accordance with the local waste disposal laws.
Any further information can be obtained from your local Environment Agency office.
When first used, an odour may be emitted by any residual protective finish or moisture, which
will cease after a short period of time.

This appliance has been constructed and distributed in compliance with the essential requirements
of the following EEC DIRECTIVES, EUROPEAN NORMS and AUSTRALIAN STANDARDS
and SAFETY REGULATIONS

CE Marking – 93/68 Low Voltage – 73/23 Gas Products – 90/396 / AG101
EMC – 89/336
Materials that can touch food – 89/109.
Safety Standards – EN 60 335-1, EN 60 335 – 2 – 6, EN 30-1-1, AS/NZS 3350-1, 3350-2-6.

As the supplier has a policy of continued product improvement, the right is reserved to adjust and
make any modifications deemed necessary without notification.

4