Venini VCG60S User Manual
COOKTOP
VCG60S
Congratulaons on purchasing your new Venini product.
It is important that you read through the following use and care manual
thoroughly to familiarize yourself with the installaon and operaon
requirements of your appliance to ensure opmum performance.
Our Customer Care centre is there to ensure you get the most out of
your appliance.
For any aer sales service please contact our
Customer Care team
on
1800 444 357
or email
service@hapl.com.au
and one of our Customer Care Team will get back to you.
Venini is a division of Home Appliances PTY LTD
20 Carloa Street Artarmon 2064
Sales
1800 805 300
Service
1800 444 357
Website
www.venini.com.au
3
Contents
Enviro
nmental note 4
Important safety information 5 – 7
Specifications 8 – 9
Electrical details 9
Gas details 9
Gas hob surface layout 9
Using the gas hob 10 - 11
Before first use 10
Switching the hob on 10
Energy saving tips 11
Cleaning 12 - 13
Cleaning the hob top 12
After each use 12
Cleaning the hob burners 12
Maintaining the enamelled pan stands 13
Installation 13 - 25
Positioning 14
Unpacking the appliance 14
Installing the appliance 15 – 16
Gas connection 17
Ventilation requirements 18
Gas Safety (Installation and Use) Regulations 19
Gas Adjustment (Conversion to LPG) 20
Minimum flow adjustment for hob gas taps 21
Gas tap maintenance 22
Safety warnings 23
Electrical connection 24
Replacing the mains supply cable 24-25
My appliance isn’t working correctly 26
Contact details 28
4
Environmental note
o The packaging materials that the manufacturer uses are
environmentally friendly and can be recycled.
o Please discard all packaging material with due regard for the
environment.
5
Important safety information
Your safety is of the utmost importance to the
manufacturer. Please make sure that you read this
instruction booklet before attempting to install or use
the appliance. If you are unsure of any of the
information contained in this booklet, please contact the
Retailer where you purchased your unit from.
General Information
o This appliance is designed for domestic household use and for
the cooking and frying of domestic foodstuffs.
o IMPORTANT: The adjacent furniture and all materials used in
the installation must be able to withstand a minimum
temperature of 85°C above the ambient temperature of the
room it is located in, whilst in use.
o Certain types of vinyl or laminate kitchen furniture are
particularly prone to heat damage or discolouration at
temperatures below the guidelines given above.
o Any damage caused by the appliance being installed in
contravention of this temperature limit, will be the liability of
the owner.
o Your new appliance is guaranteed against electrical or
mechanical defects, subject to certain exclusions that are noted
in the Conditions of Guarantee. The foregoing does not affect
your statutory rights.
o The use of this appliance for any other purpose or in any other
environment without the express agreement of the manufacturer
Ltd. will invalidate any warranty or liability claim.
o You should not use this appliance to store items on or as a work
surface.
o No modifications to the appliance are permitted by the
manufacturer.
o You should not store or place flammable or highly flammable
liquids/materials on top of or near the appliance. Items made
from aluminium, plastic or plastic film should also be kept away
from the appliance, as they may fuse to the surface.
o Repairs may only be carried out by authorised service
agents.
6
Child Safety
o The manufacturer strongly recommends that babies and young
children are prevented from being near to the appliance and not
allowed to touch the appliance at any time. During and after
use, all surfaces will be hot.
o If it is necessary for younger family members to be in the
kitchen, please ensure that they are kept under close supervision
at all times.
o Older children should only be allowed to utilise the appliance
when supervised.
General Safety
o The appliance should only be installed and connected by a
suitably qualified person.
o Care should be taken to ensure that the units and work surfaces
that you build the appliance into, meet with the relevant
standards.
During use
o Any film or stickers that are present on the hob surface when it
is delivered should be removed before use.
o Care should be used when utilising the appliance, otherwise
there is a risk of burns being caused.
o You should not allow the electrical connection cables to come
into contact with the hob surface when it is hot or any hot
cookware.
o If fat and oil overheats, then it can ignite extremely quickly. For
this reason, when cooking with fat and oil the appliance should
not be left unattended.
o Make sure that all of the cooking zones are switched off after use.
7
Cleaning
o Cleaning of the hob should be carried out on a regular basis.
o IMPORTANT: Before attempting to clean the appliance, it
should be disconnected from the mains and cool.
o Great care should be taken whilst using this appliance and when
following the cleaning procedure.
o You should not use a steam jet or any other high pressure
cleaning equipment to clean the appliance.
Installation
This appliance must be correctly installed by a
suitably qualified person, strictly in accordance
with the manufacturer’s instructions. Please see
the specific section of this booklet that refers to
installation.
o The manufacturer declines any responsibility for injury or
damage, to person or property, as a result of improper
use or installation of this appliance.
o The manufacturer DOES NOT recommend that this
appliance is installed on any type of marine vessel.
Declaration of conformity
This appliance complies with the following European Directives:
-2006/95/CE General Regulations / Low tension
-2009/142/CE Concerning gas appliances
-1935/2004/CE 90/128/EEC this appliance is suitable to come in
contact with food
-2004/108/CE Electromagnetic compatibility
-Gas products – AS4551
-Low voltage – 73/23
-Safety standards – EN 60335-1, EN30-1-1, AS/NZS 3350-1,3350-2-6
The manufacturer declares that the hob is built using certified
materials and requires the appliance to be installed in accordance with
the standards currently in force. This appliance must be used by a
trained person for domestic purposes only.
8
Specifications
Product dimensions: Aperture dimensions:
Depth: 510 mm Depth: 480 mm
Width: 600 mm Width: 560 mm
Height: 40 mm
Product specifications:
o 1 x 10.8 MJ/h rapid burner
o 2 x 6.3 MJ/h semi-rapid burners
o 1 x 3.6 MJ/h auxiliary burner
o Front control operation
o Automatic ignition
o Enamelled pan stands
Standard accessories:
o LPG conversion jets
o Regulator
9
Gas hob surface layout
ACG6S
A = 10.8 MJ/h rapid burner
B = 6.3 MJ/h semi-rapid burners
C = 3.6 MJ/h auxiliary burner
D = Control panel
Electrical details
Rated Voltage: 220 - 240 Vac 50 / 60 Hz
Supply Connection: 3A
Max Rated Inputs: 0.0008 kW
Mains Supply Lead: 3 core x 0.75mm² (Type RR-F <HAR> marked)
Gas details
Connection: Rp ½ (ISO R7)
Type: Natural Gas (1.0 KPa)
ULPG (2.75 KPa)
For future reference please record the following information which can
be found on the rating plate and the date of purchase which can be
found on your sales invoice. The rating plate of your hob is located on
the underneath of the appliance. Therefore it is a good idea to record
this information before you install your appliance.
Model Number ……………………………….
Serial Number ……………………………….
Date of Purchase ……………………………….
Loading...