VENCER BSHSBE18 Getting Started Manual

BBlluueettooootthh VV33..00 M

Moonnoo HHeeaaddsseett

BBSSHHSSBBEE1188

20F-1, No.77, Sec.1 , Hsin Tai Wu Rd., Hsi-Chih, Taipei Taiwan R.O.C.

Tel. No.:[phone] Fax No.:[phone]

1/5

Mini Bluetooth Headset

The Mini Bluetooth Headset is a Bluetooth device developed with the latest Bluetooth
technology, which can connect to other Bluetooth devices such as mobile phone,
desktop or notebook computer, PDA (with audio gateway profile supported) wirelessly.

Getting Started

BBlluueettooootthh VV33..00 M

Moonnoo HHeeaaddsseett

BBSSHHSSBBEE1188

20F-1, No.77, Sec.1 , Hsin Tai Wu Rd., Hsi-Chih, Taipei Taiwan R.O.C.

Tel. No.:[phone] Fax No.:[phone]

2/5

 Charging Battery

The Headset comes with a rechargeable battery included. The battery is
not fully charged when it is new. Plug the charging cable or adapter. The
red indicator on the headset will turn on as headset is charging.
When the battery is full, the red indicator will turn off.

 Turning the Headset On or Off

To turn the Headset on

Press and hold the SW1 button for 3 seconds, then the blue indicator
of the Headset flashes. The Headset is now turned on.

To turn the Headset off

Press and hold the SW1 button for 3 seconds, then the Red indicator
will flash, and then the Headset will turn off.

 Pairing the Headset

You are required to pair the Headset with your mobile phone before
using the Headset.
Step 1 : The Headset must be powered off before initiating the
paring. Hold and keep pressing the SW1 button for 6 second s un til the
blue and the red indicators are flashing alternatively. The headset is
now ready for pairing.
Step 2 : Initiate pairing process on your Bluetooth mobile phone to pair
with the Headset. After search, you can find the device name
“BSHSBE18”
Step 3 : When asked the Passkey by the mobile phone, enter 1234 and
confirm it.
When pairing is successful, the red indicator will turn off and the blue
indicator will flash.

BBlluueettooootthh VV33..00 M

Moonnoo HHeeaaddsseett

BBSSHHSSBBEE1188

20F-1, No.77, Sec.1 , Hsin Tai Wu Rd., Hsi-Chih, Taipei Taiwan R.O.C.

Tel. No.:[phone] Fax No.:[phone]

3/5

 Making Call

Using voice dialing

Press the SW1, waiting for a beep, and say the name of the person you
want to call.

Using Last Number Redial

Press the SW2 an SW3 together, then mobile phone will dial out the last
number dialed.

Using the phone keys to make call

Dial the number on the mobile phone as you normally d o. Once the call
has been set up, the sound will be transmitted to your Headset
automatically.

 Answering Calls and Ending Call

When the Headset is powered on, and there is an incoming call, you will
hear a ring tone. When th e Headset rings, press the SW1 button to
answer.
Adjust the Headset volume by press the SW2 to increase the volume or
SW3 to decrease the volume.
End calls by pressing SW1 or don’t press any button.

 Mute

Press both SW2 and SW3 keys in the same time to enable Mute function,
To press both SW2 and SW3 in the same time again to disable Mute
function.

 Transfer Audio

If you want to transfer the audio from headset to phone, pr ess SW1 and
SW3 together.

BBlluueettooootthh VV33..00 M

Moonnoo HHeeaaddsseett

BBSSHHSSBBEE1188

20F-1, No.77, Sec.1 , Hsin Tai Wu Rd., Hsi-Chih, Taipei Taiwan R.O.C.

Tel. No.:[phone] Fax No.:[phone]

4/5

 Reject Call

When the headset ring and you do not want to answer this call. To press
SW2 and SW3 together to reject this call.

 Three Way Call

To short press SW1 to be able to accept waiting call and hold the active

call

To press SW2 and SW3 together to accept waiting call and end the active

call

To press both SW1 and SW3 to add the on hold call to three way call.

 Multipoint

1. To do pair procedure to pair with mobile phone#1 and connect it

2. To do pair procedure again to pair with mobile phone#2 and connect
it.

3. Re-power on headset, the headset should connect to both mobile
phone.(If headset did not connect to mobile phone, please operate
Bluetooth setting of mobile phone to establish connection)

4. Now, you can use headset to pick up call for each mobile phone and
be able to switch by SW1 short press between each other. By pressing
both SW2 and SW3 to end the call.

Note : A2DP multipoint is only support on mobile phone.

Low Battery

When the red indicator starts to flash, it indicates that the Headset is running low on
battery.
Charge the Headset until the red indicator turns off.

BBlluueettooootthh VV33..00 M

Moonnoo HHeeaaddsseett

BBSSHHSSBBEE1188

20F-1, No.77, Sec.1 , Hsin Tai Wu Rd., Hsi-Chih, Taipei Taiwan R.O.C.

Tel. No.:[phone] Fax No.:[phone]

5/5