
UMBRA
SCREEN PROTECTOR WITH SHADE
USER MANUAL
 

THANK YOU FOR CHOOSING VELLO
The Umbra screen protector is designed for extended use to protect your camera’s LCD from scratches, dust, smears, and even 
impacts. It adheres to the LCD without leaving behind a sticky residue, and it’s rigid, so it’s easy to apply without trapping air 
bubbles underneath. The Vello Screen Protector is made from ultra-thin optical glass that allows 98% light transmittance so it won’t 
aect the LCD’s appearance or functionality.
Please read these instructions carefully before applying your Vello Glass Screen Protector.
1. Remove any film or 
other substances that 
are stuck to your 
camera’s LCD.
2. Clean the LCD with 
the wet wipe, and 
allow the LCD to dry 
before applying the 
screen protector.
To remove the Vello Screen Protector, remove th e LCD shade, and push the screen protec tor to the side until you can lift i t up to remove it.
3. Peel o the backing 
film from the screen 
protector. Be careful 
not to get fingerprints 
on this side of the 
screen protector.
 

Box Contents
• Glass screen protector
• LCD shade
• Wet wipe
• User manual
4. Make sure your 
camera is on a stable 
surface, and align the 
screen protector with 
your camera’s LCD.
5. Press down on the 
center of the screen 
protector, and push 
outwards to apply.
6. Open the LCD shade, 
and attach it by 
aligning its magnetic 
strips with the metal 
edges of the screen 
protector and placing 
it onto the LCD.
 

This VELLO product is warranted to the original purchaser to be free from defects in materials 
One-Year Limited Warranty
and workmanship under normal consumer use for a period of one (1) year from the original 
purchase date or thirty (30) days after replacement, whichever occurs later. The warranty 
provider’s responsibility with respect to this limited warranty shall be limited solely to repair 
or replacement, at the provider’s discretion, of any product that fails during normal use of this 
product in its intended manner and in its intended environment. Inoperability of the product 
or part(s) shall be determined by the warranty provider. If the product has been discontinued, 
the warranty provider reserves the right to replace it with a model of equivalent quality and 
function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, 
alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, 
THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY 
IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY 
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty 
provides you with specific legal rights, and you may also have additional rights that vary from 
state to state.
To obtain warranty coverage, contact the Vello Customer Service Department to obtain a 
return merchandise authorization (“RMA”) number, and return the defective product to Vello 
along with the RMA number and proof of purchase. Shipment of the defective product is at the 
purchaser’s own risk and expense.
For more information or to arrange service, visit www.vellogear.com or call Customer Service 
at 212-594-2353.
Product warranty provided by the Gradus Group. 
www.gradusgroup.com 
VELLO is a registered trademark of the Gradus Group. 
© 2018 Gradus Group LLC. All Rights Reserved.
www.vellogear.com
All other trademarks are the property of their respective owners
GG1