Page 1
How To Attach Your Hand Grip:
1. Thread the hand grip strap
through the strap mount on
the camera.
2. Then, thread the hand grip
strap through the adjustment
buckle that is facing the
camera, loop the strap over
and thread through the
bottom shoulder strap
mount. The remaining strap
will thread through the
opposing side of the
adjustment buckle.
3. Pull the remaining strap to
secure.
4. Align the 1/4″-20 thumb
screw plate with the camera’s
tripod mount and begin to
tighten.
Page 2
5. Rotate the 1/4″-20 thumb
screw plate while securely
tightening the 1/4″-20 thumb
screw, and ensure that the
thumb screw plate tab is
properly aligned with the
camera’s base.
6. The strap can be tugged and
realigned with the
adjustment buckle to
regulate length, hand size
and overall tension.
Warranty
Vello provides a limited warranty that this product is free from
defects in materials and workmanship to the original purchaser under
normal use for a period of one (1) year from the original purchase
date or thirty (30) days after replacement whichever occurs later.
Our responsibility with respect to this limited warranty shall be
limited solely to repair or replacement, at its option, of any product
which fails during normal consumer use. To obtain warranty coverage
during the Warranty Period, contact your place of purchase ("Seller")
to obtain a return merchandise authorization ("RMA") number, and
return to Seller the defective product along with proof of purchase
and the RMA number. This warranty does not extend to damage or
failure which results from misuse, neglect, accident, alteration, abuse,
improper installation or maintenance. EXCEPT AS PROVIDED
HEREIN, VELLO MAKES NEITHER ANY EXPRESS WARRANTIES
NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT
LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides
you with specific legal rights, and you may also have additional rights
which vary from state to state.
© Copyright 2013 Gradus Group
Loading...