Vello GSPU-CT4I, GSPU-C5DIII, GSPU-SA7RII, GSPU-SA7R, GSPU-OEM5 User manual

SCREEN
PROTECTOR
ULTRA

ULTRA-CLEAR
OPTICAL GLASS

USER MANUAL

Introduction

Thank you for choosing Vello.

Congratulations on the purchase of your Vello Screen Protector Ultra. This screen protector is designed for long-term use to
protect your camera’s LCD from scratches, dust, smears, and even impact. It adheres to the LCD without leaving behind any sticky
residue, and it’s rigid, so it’s easy to apply without trapping any air bubbles underneath. The Vello Screen Protector Ultra is made
from ultra-clear, UV-protective Japanese optical glass that won’t aect the LCD’s image quality—in fact, you can barely tell it’s there!

Please read these instructions carefully before applying your Vello Screen Protector Ultra.

Box Contents

•Vello Screen Protector Ultra

•Wet wipe

•Microfiber cleaning cloth

•Cleaning tape

•Plastic applicator

•User manual (this booklet)

1. Remove any
films or other
intervening
substances from
your camera’s
LCD.

To remove the Vello Screen Protector Ul tra, push the screen protector to the side until you can lift it up to remove it completely. Make sure to clean the camera’s LCD before rea pplying.

2. Clean the LCD
with the wet
wipe and then
wipe it dry with
the microfiber
cleaning cloth.

3. Peel o the
backing from
the cleaning
tape and use it
to wipe away
any remaining
dust from your
camera’s LCD.

4. Peel o tape A
from the screen
protector. Be
careful not
to get any
fingerprints
on this side
of the screen
protector.

5. Make sure
your camera
is on a stable
surface, and
align the screen
protector with
you camera’s
LCD.

6. Press down
firmly on the
center of
the screen
protector and
push outwards
to apply.

7. Use the plastic
applicator to
smooth out any
air bubbles by
pushing them
out to the edge
of the screen
protector.

8. Peel o tape B
from the screen
protector.