EZ-FLIP
GEL SET
THANK YOU FOR CHOOSING VELLO
The Vello EZ-Flip Gel Set
contains 30 assorted color gels
and a reversible silver reflector/
black flag to control the light
from your camera-mounted
flash. When the light from
your flash casts a color that
is unflattering or harsh on
skin tones, use one of the
gels to acquire the correct
2
shade. If you want to get
creative with the color in your
photos, quickly insert one
of the gels into the EZ-Flip
Gel Holder and watch how
your photograph transforms.
With the included EZ-Flip Gel
Holder, you can position any
of the assorted gels in front
of your flash with a flick of
the wrist, and move it back
out of the way just as quickly.
It fastens to the flash head
via the hook-and-loop strap
instead of the hassle of rubber
bands and tape. Everything fits
in the included nylon carrying
case, which makes this a
great portable tool that won’t
take up space in your bag.
CONTENTS
• 30 × assorted colored gels
• Silver reflector/black flag
• EZ-Flip Gel Holder with
hook-and-loop strap
• Nylon carrying case
3
PRECAUTIONS
• Please read and follow these
instructions and keep this
manual in a safe place.
• Keep this unit away from
water and any flammable
gas or liquid.
• Keep this unit away from
children.
4
• Make sure this item is
intact and that no parts are
missing.
• Handle this unit with care.
• All photos in this manual
are for illustrative purposes
only.
ATTACHING THE EZ-FLIP GEL HOLDER
. Place the EZ-Flip Gel
Holder onto the flash head
with the rubber side of the
hook-and-loop strap facing
down. Make sure the unit is
facing forward with the gel
holder flipped over, in front
of the flash.
2. Wrap the hook-and-loop
strap around the head of
the flash unit and secure
tightly so the gel holder
does not slip. You can have
the gel holder in front of
the flash or flip it out of the
way at your convenience.
5
INSERTING A COLOR GEL
Colored gels can be used for
coloring, warming, cooling, or
color correcting your photos.
. Select a colored gel and
slide it behind the gel
holder tabs.
2. Position the gel holder in
front of the face of the flash.
6
Tip: Each side of the gel holder
has tabs which can be used with
multiple gels together for dierent
color combinations.
USING THE BLACK FLAG
The black flag is used when
you need to control the spill
light from your flash. This is
helpful for blocking light from
your subject, or when you do
not want light bouncing to
other areas and aecting your
photos. Typically, this is used in
o-camera strobe applications.
. Insert the black flag into
2. Position the EZ-Flip Gel
either side of the EZ-Flip
Gel Holder so that the
silver side is facing the flash.
Holder so that the black flag
blocks the light of the flash
from the area you do not
want illuminated.
7
USING THE SILVER REFLECTOR
The silver reflector is used
to bounce light while adding
a saturated, soft look. This
is ideal when shooting
portraits or close-ups.
. Insert the reflector into
either side of the EZ-Flip
Gel Holder so that the
silver side is facing the flash.
8
2. Adjust the angle of your
flash’s head so that it is
pointing upwards.
3. Flip the gel holder to a 45°
angle above the front of
the flash for optimal use.
You can then make fine
adjustments to dial in the
amount light you want to
bounce.
Tip: You can use any of the color
gels in combination with the silver
reflector.
SPECIFICATIONS
Dimensions (H x W x L) 4" × 4" × 2" (0. × 0. × 5. cm)
Weight 4 oz. (3.4 g)
Gel Dimensions (H x W) 2.25" × 3.5" (5.7 × 9 cm)
9
ONE-YEAR LIMITED WARRANTY
This VELLO product is warranted to the original purchaser to be free from defects in materials
and workmanship under normal consumer use for a period of one () year from the original
purchase date or thirty (30) days after replacement, whichever occurs later. The warranty
provider’s responsibility with respect to this limited warranty shall be limited solely to repair or
replacement, at the provider’s discretion, of any product that fails during normal use of this product
in its intended manner and in its intended environment. Inoperability of the product or part(s)
shall be determined by the warranty provider. If the product has been discontinued, the warranty
provider reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident,
alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN,
THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY
IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you
with specific legal rights, and you may also have additional rights that vary from state to state.
0
To obtain warranty coverage, contact the Vello Customer Service Department to
obtain a return merchandise authorization (“RMA”) number, and return the defective
product to Vello along with the RMA number and proof of purchase. Shipment
of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.vellogear.com
or call Customer Service at 22-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
VELLO is a registered trademark of the Gradus Group.
© 205 Gradus Group LLC. All Rights Reserved.
www.vellogear.com
All other trademarks are the property of their respective owners.
© Copyright 205 Gradus Group GG1
Loading...