Vela Jive 100EL, Jive 100 User Manual
VELA Jive
100 & 100EL
VELA Jive 100El
VELA Jive 100
USER MANUAL EN
VARIANT:
Manual no. 105616
TABLE OF CONTENTS
1.0. INTRODUCTION 3
1.1. SAFETY 4
1.1.1. Usage 4
1.1.2. Transport 4
1.2. WARRANTY 4
1.3. UNPACKING THE CHAIR 5
1.4. MAINTENANCE 5
1.4.1. Wheels 5
1.4.2. Frame 5
1.4.3. Upholstery 5
1.5. RECYCLING 5
1.6. USER MANUAL 6
1.6.1. Attaching the backrest 6
1.6.2. Adjustment of seat height (VELA Jive El) 6
1.6.3. Placement of plug (VELA Jive El) 6
1.6.4. Adjustment of seat height (VELA Jive 100) 6
1.6.5. Adjustment of seat tilt 7
1.6.6. Adjustment of back angle 7
1.6.7. Adjustment of back height 7
1.6.8. Adjustment of armrest, height (optional) 7
1.6.9. Adjustment of armrest, width (optional) 8
1.6.10. Rotation (VELA Jive 100) 8
1.6.11. Wheel brake 8
1.6.12. Adjustment of seat height by foot contact (optional) 8
1.6.13. Back latch (VELA Jive w/ CY Backrest) 9
1.6.14. Charging (VELA Tango El) 9
1.6.15. Battery indicator under seat (VELA Jive El) 9
1.6.16. Adjustment of foot plate (Optional) 9
1.6.17. Angle Contact (optional) 10
1.6.18. Armrest for surgeon’s chair (optional) 10
1.6.19. Adjustment of armrest for surgeon’s chair, height (optional) 10
1.6.20. Armrest for sample collection (optional) 10
1.6.21. Armrest w. ball and socket-joint (optional) 11
1.6.22. Ergorest arm support (optional) 11
3
DEAR CUSTOMER
Thank you for purchasing a VELA Jive. This user
manual contain useful information about positioning,
operating and maintenance of VELA Jive chairs.
Important
Please read this user manual thoroughly and keep
it for later use. This user manual must always
accompany the chair. The user manual is also
available on VELA’s website: www.vela-medical.com,
where you also can find other relevant information
about VELA Jive chairs.
If you have any questions, please contact VELA’s
distributor in your country.
VELA reserves the right to make changes to this
manual.
VELA
Gøteborgvej 8-12
DK-9200 Aalborg SV
Denmark
www.vela-medical.com
1.0. INTRODUCTION
4
1.1. SAFETY
This chair bears the CE mark and
conforms to all applicable EU rules.
The stool is manufactured by VELA,
Vermund Larsen A/S, Goeteborgvej
8-12, 9200 Aalborg SV, Denmark.
VELA Jive El is tested according to
DS/EN1335-1-2-3 oce chair safety
and stability. The chair also have
got the EMC test according to EN
61000-6-2 Radiated immunity, ESD
/ EN 61000-6-3 Radiated emission,
Electrical safety according to EN
60601-1 & 60601-1-2.
1.1.1. USAGE
VELA Jive is an indoor chair
designed for sitting persons.
:: The chair is not build to stand on.
:: For safe transfer of a person to
and from the chair, it is possible
to brake the chair on the wheels.
VELA Jive 100/100El is tested and
approved for a maximum user
weight of 110 kg (17st 4,5lbs).
1.1.2. TRANSPORT
By transport in car, by plain or other
means of transport, always use
the chair’s brake. The chair is not
approved as a passenger seat in
means of transportation and should
not be used as such.
The chair withstands the following
transport specifikations:
Temperature: -40°C (-40°F) to
+70°C (+158°F)
Humidity: 15-95%
Air pressure: PPP up to 1000 meters
(3280 ft) above sea level
1.2. WARRANTY
VELA provides warranty by the laws
and regulations which are debt in the
country the chair is bought in. The
warranty only applies when using
original spare parts and accessories.
Modification may only be carried out
by authorised service technicians.
VELA does not accept responsibility
for damage or injury to the product
or user, which have arisen due to:
:: Transportation
:: Misuse
:: General wear and tear
:: Incorrect use
:: Use of non-original spare parts
and accessories
:: Adjustments carried out by
unauthorised service technicians
GENERAL
Loading...