veito CH1800 RE, CH1800 XE User Manual

EN User’s Manual

CH1800 RE

Carbon Infrared Heater

LT Naudojimo Instrukcija

Infraraudonųjų Spindulių Šildytuvas Su Anglimi

-2-

Carbon Infrared Heater

• Thank you for purchasing Veito Carbon Infrared Heater. Please read the instructions thoroughly
before using your heater.

• After reading the instructions, please keep it in a place accessible to all users.

• We cannot be liable for any damages caused by failure to observe these instructions.

• This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way.

Safety Precautions

These precautions are designed for keeping users safe and preventing material damage. Be sure
to read them and use the product correctly.

Read all instructions before installing and using this heater.

This heater is designed for use on a 220-240VAC 50/60Hz supply.

Use this heater only as described in this manual. Any other use not recommended by the
manufacturer may cause fire, electric shock, or injury to persons.

This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

The fireguard of this heater is intended to prevent direct access to heating elements and must be in
place when the heater is in use.

The fireguard does not give full protection for young children and infirm persons.

Do not use the heater in areas where gasoline, paint, flammable liquids or highly combustible dusts
are used or stored.

Ensure both plug and socket is clean and free from dust when using.

Regularly inspect the power cord and plug for wear or damage and do not operate the heater with
a damaged cord, plug or loose socket or after the heater malfunctions, has been dropped or
damaged in any manner.

To disconnect the heater from the power supply, turn the controls off, grip the plug and pull from the
power socket. Never pull by the cord. Never touch the plug with wet or moist hands.

Do not kink or place the main power lead under heavy objects. Do not allow the supply cord to sit or
hang in front of the heater while in use.

EN

-3-

Do not overload the dedicated power socket with other equipment. Do not use and extension cord
with this heater.

The heater must not be located immediately below a socket outlet or connection box and ensure
that the unit is properly earthed through the mains power circuit.

Keep combustible materials such as furniture, pillows, bedding, papers, clothes and curtains at least

1.5m from the front of the heater and keep them away from the sides and rear.

Do not use the heater if the heating element is cracked or broken.

Never put hands or objects into the main body of the product. Never touch it immediately after use.
Always disconnect the heater from the electricity supply and allow it to cool before adjusting the
position or attempting to work on it.

Never place combustible objects on the product such as vinyl and plastic items.

Do not use this heater in the immediate surroundings of a bath, a shower, or a swimming pool.

Extreme care should be taken whenever the heater is left operating and unattended.

Never use the heater while sleeping.

Introduction

The Veito Carbon Infrared heater produces instant and comfortable heat like the sun. These robust
and weatherproof heaters are designed for domestic and commercial heating applications.

Model CH1800 RE
Heating Capacity (BTU/h) 7500
Maximum Power (W) 1700
Space for use (m2) 20
Power Supply AC 220-240V 50/60 Hz
Dimensions (mm) (WxLxH) 80 x 170 x 820
Product Weight (kg) 2.1
Controlling method Push Button and Remote Control
Controlling function Automatic Temperature Control, 4 Power Settings, Off Time
Safety device Tilt Sensor

-4-

Precautions for Installations

Never install the heater on a combustible surface. Do not use the unit on unstable or unsafe surfaces.

Install the product at places that are visible to people.

Do not install at places with high temperature.

Keep packaging parts because they are necessary in maintaining the heater for a long time.

Installation

Assemble the two parts of the base.

Insert the plastic connection part onto the aluminum profile.

Place the aluminum profile into the place on the base and push it on a
level until it sounds ‘click’.

Assemble the product stand with the product. Tighten the connection nut
adequately as to secure the heater in position. You will re-adjust this
height later.

-5-

Always leave a clear space of at least 0.5m from the left and right of the unit. The unit must also
have at least 1.5m clear space above it. Never put any obstacles nearer than 1.5m to the front of
the unit.

Use the unit in places with easy access to power sockets and that are well ventilated.

Never use connecting terminals in the power lead. Always directly connect the unit to the power.

Put plug into specific outlet for 220-240VAC 50/60Hz with earth terminal.

Configuration

1-Plastic Body

2-Base Reflector

3-Aluminium Body

4-Rear Reflector

5-Safety Grille

6-Carbon Flament

7-Control Panel

8-Aluminum Profile

9-Plastic Base

10-Carry Handle

11-Fixing Plastic

12-Fixing Nut

13-Power Cord