Veilux VP-58CND12X Instruction Manual

MINI SPEED DOME CAMERA

Veilux Model # VP-58CND12X User Manual

12X Mini Speed Dome Camera

Instruction Manual

Website: www.Veilux.net Phone # [phone]

Veilux Model # VP-58CND12X User Manual

CONTENTS

Warnings & Caution ---------------------------------------------------------------------------------------- 3

What’s in the Box? ----------------------------------------------------------------------------------------- 3

General Features --------------------------------------------------------------------------------------------- 4

Names of Each Part ---------------------------------------------------------------------------------------- 5

Installation ---------------------------------------------------------------------------------------------------- 6

A. Connections ---------------------------------------------------------------------------------- 6

B. Ceiling Mount Type ------------------------------------------------------------------------ 7

C. Embedded Mount Type ---------------------------------------------------------------------- 8

D. Pipe Mount Type ------------------------------------------------------------------------------ 10

E. Gooseneck Mount Type --------------------------------------------------------------------- 12

F. Wall Mount Type ------------------------------------------------------------------------------ 13

G. Corner Mount Type --------------------------------------------------------------------------- 15

H. Pole Mount Type ------------------------------------------------------------------------------ 17

Quick Operating Keys ------------------------------------------------------------------------------------- 18

Diagnostic ------------------------------------------------------------------------------------------------------ 20

OSD Menu Setting-------------------------------------------------------------------------------------------- 21

A. OSD Menu Table ------------------------------------------------------------------------------ 21

B. DOME SET ------------------------------------------------------------------------------------- 22

C. CAMERA SET --------------------------------------------------------------------------------- 27

D. PRESET ---------------------------------------------------------------------------------------- 29

E. AUTO SCAN SET----------------------------------------------------------------------------- 30

F. TOUR SET ------------------------------------------------------------------------------------- 31

G. PRIVACY SET --------------------------------------------------------------------------------- 32

H. PATTERN SET -------------------------------------------------------------------------------- 33

I. ALARM SET------------------------------------------------------------------------------------

34

J. SECTOR SET --------------------------------------------------------------------------------- 35

DIP Switch Setting ------------------------------------------------------------------------------------------ 36

A. Factory Default setting --------------------------------------------------------------------- 36

B. ID Setting (1-ON, 0-OFF)(1->10)---------------------------------------------------------- 36

C. Protocol Setting ------------------------------------------------------------------------------- 37

D. Baud Rate Setting ---------------------------------------------------------------------------- 37

E. 485 Terminations ------------------------------------------------------------------------------ 37

Trouble Shooting --------------------------------------------------------------------------------------------- 38

Specication -------------------------------------------------------------------------------------------------- 39

Dimension -------------------------------------------------------------------------------------------------- 40

Website: www.Veilux.net Phone # [phone]

2

The unit should be installed by the trained

personnel

Switch off immediately if the product emits

smoke or abnormal heat.

Never install the product in area exposed to

water, oil or gas.

Never install the product on a ceiling that

cannot hold its weight.

Never touch the power cord with wet hands.

Clean only with dry cloth.

Never install the product in extreme high or low

temperature.

Ensure that the product is not subjected to

strong impacts and vibration

Never expose the camera to direct sunlight

Never touch the front glass of the product.

Warning

Never manually move the pan/tilt as-

sembly. Serious and permanent dam-

age will occur

Veilux Model # VP-58CND12X User Manual

WARNINGS & CAUTION

If you fail to read this information and

handle the product incorrectly, death or

serious injury may occur.

This symbol is intended to alert the
user to the presence of un-insulated
“dangerous voltage” within the prod­uct’s enclosure that may be of suf-

cient magnitude to constitute a risk of

electric shock to persons.

This symbol is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the
literature accompanying the appliance.

Website: www.Veilux.net Phone # [phone]

3

What’s in the Box ?

1. Camera

2. Screws ( Ø4x16 screw 5EA )

3. Terminal block 5pin 2EA (DC Type)

4. Terminal block 5pin 1EA , 6pin 1EA

(AC 24V Type)

5. Manual

6. Screw Cap (1 EA)

Veilux Model # VP-58CND12X User Manual

GENERAL FEATURES

12X Zoom Mini Speed Dome

12X Optical Zoom with 16X digital zoom

±0.05° dome system accuracy with full

micro step

With 0.05° positional accuracy, the camera provides
excellent sensitive and delicate control. This is achieved by
full micro step motors and twin gear system

360û Endless Rotation

12X mini speed dome is capable of endless rotation of 360
degrees

Compensation function: preset position

The function provides absolute preset position even in

difcult applications where vibration and strong winds may

otherwise affect dome performance.

Over 200°/Sec Preset Speed

The 360° full pan function moves through a maximum
of 200°/sec., enabling you to quickly pinpoint the spot
you want to watch. Tilt speed is also driven at 200°/sec on
preset seek.

Polarity Protection of Power (DC12V)

This protection function prevents damage to the domes
power board if the dc supply is connected with incorrect
polarity.

Filter changeable True Day/Night

Top quality images are assured under day and night
conditions due to the true day / night camera with IR cut

lter. Low light sensitivity is further increased by the

cameras digital slow shutter.

Indoor / Outdoor applications

The domes small size and construction to IP 66 ingress
protection rating make it ideal for internal or external
applications.

Quick Operation Keys

This camera provides quick function keys to allow
control by most keyboards and DVRs that have Pelco
protocol support.

Various Surveillance Functions

Auto Scan repeats pan and tilt between two preset

positions with different speed and dwell time.

8 Group Tour up to 8 Programmable Group tours are

available with each group is consisting of up to 60 preset
steps with different speed and dwell times along with 16
character titling.

165 Preset positions up to 165 programmable

preset positions are available with 16 character title.

8 Patterns up to 8 programmable user-dened patters

are available with 16 character title. Each can be up to 50
seconds long, giving a total of 400 seconds.

8 Sectors up to 8 programmable user-dened sectors

are available with 16 character titling.

4 Privacy Masking Zones up to 4 programmable

user-dened privacy masking zones are available.

4 Alarm input up to 4 alarms can be wired to the dome

head and can activate presets, tours, or patterns.

150°/S – Manual speed

The dome provides up to 150°/sec of manual speed and
is also adjustable from 100°/sec to 150°/sec in 10°/sec
increments.

1/4” Sony Super HAD CCD

Equipped with Sony Super HAD CCD technology, the
camera provides excellent sensitivity and low smear
levels.

Intelligent Pan/Tilt Controlling Intelligent

Pan/Tilt function is continually increases or decreases

pan and tilt speeds in proportion to zoom.

Dome Housing

The elegantly designed aluminum body and Poly
Carbonate dome cover provide a very solid product for a
wide range of applications.

Password Protection

It is possible to password protect all dome settings to
prevent unauthorized changes.

Website: www.Veilux.net Phone # [phone]

4

Veilux Model # VP-58CND12X User Manual

NAMES OF EACH PART

FIG. 1

1. Surface Mount Adaptor

2. Cap Screw (PT3/4, 1EA)

3. Dip Switch

4. Terminal Block

5. Main body

Website: www.Veilux.net Phone # [phone]

5

● Do not over tighten screws. This can cause damage.

Veilux Model # VP-58CND12X User Manual

INSTALLATION

A. CONNECTIONS

A-1

1. Loose the screws on the domes cover and remove it from the base.
(Screws won’t be removed)

2. Loosen the screws which connect mount cover and Main base and separate dome
cover from the main base. (These are captive screws that do not remove)

3. Connect power to Power and GND.

4. Connect video to video and GND.

5. Connect communication cable to RS-485 connectors.

6. Connect alarm common cables to GND. Connect the alarm input cables to their
relevant terminal (1-4) Alarm polarity can be programmed as N/O or N/C

■ 12VDC type

■ 24VAC

type

Website: www.Veilux.net Phone # [phone]

6

FIG. 2

Veilux Model # VP-58CND12X User Manual

INSTALLATION

B. CEILING MOUNT TYPE

1. Fix the surface mount adaptor with 4pcs of screws on the place where you want to install. (FIG. 3)

Caution ) Be sure to use seal tape for 3/4” cap screw to prevent a water leakage.

2. When you use pipe, please note the standard size of pipe. (FIG.4) Caution ) Be sure to use seal

tape for pipe screw to prevent a water leakage.

3. Re-assemble the dome.

FIG. 5

Website: www.Veilux.net Phone # [phone]

7

FIG. 3

FIG. 4

Contents

■ Embedded mount bracket 1ea ■ Holder 3ea

■ Decoration cover 1ea ■ Safety wire 2ea

■ Screw – M3.0 x 6 5ea ■ Screw - Ø4.0 x 16 1ea

Veilux Model # VP-58CND12X User Manual

INSTALLATION

C. EMBEDDED MOUNT TYPE

Website: www.Veilux.net Phone # [phone]

8

SAFETY WIRE HOLE

LOCK LEVER

LOCK LEVER

SUSPENSION

SAFETY WIRE (150cm)

LOCK LEVER

LOCK LEVER

FIG. 6

FIG. 7

SAFETY WIRE (25cm)

M3 SCREW

M3.0 SCREW

CAMERA

HOLDER

DECORATION COVER

FIG. 8

Veilux Model # VP-58CND12X User Manual

INSTALLATION

1. Make a hole, 190mm, on the ceiling. (FIG. 6)

2. Hook the safety wire over suspension and safety wire hold of embedded mount
bracket.

Fold the lock levers and insert the bracket into the hole.

You can x the lock lever by driving screws. (FIG. 7)

3. Fix the decoration cover on the rear of camera by holder screws (M3.0) (FIG. 8)

4. Drive the screw (M4.0) to x safety wire of camera and hook the safety wire over safety

wire hold of embedded mount bracket. (FIG. 9)

5. Install the camera by inserting cover lock and twisting it clockwise. (FIG. 10)

6. Fix the decoration cover by screw (Ø4.0x16) (FIG. 10)

Website: www.Veilux.net Phone # [phone]

9

FIG. 9

FIG. 10

10

Contents

■ Pipe mount bracket 1ea ■ Rubber 1ea

■ Screw – M4.0 x 8 4ea ■ Set anchor bolt (W5/16) 4ea

Veilux Model # VP-58CND12X User Manual

INSTALLATION

D. PIPE MOUNT TYPE

Website: www.Veilux.net Phone # [phone]

SCREW M4x8 (4ea)

BRACKET

(RUBBER BOTTOM VIEW)

RUBBER

BOTTOM COVER

FIG. 11

1. A s above FIG.11 , assemble rubber and bracket on the bottom of camera.

2. A fter finishing assembly, it will be shown as below. (FIG.12)

FIG. 12

11

Veilux Model # VP-58CND12X User Manual

INSTALLATION

3. If you want to install the speed dome on the concrete wall, you need to make 12.5mm diameter

4 holes by drill like FIG. 13 (Depth 37mm)

4. Install SET ANCHOR BOLT on the holes.

5. As shown on FIG.15, after assembling mini PTZ and bottom cover assembly, drive the pipe mount

bracket and x. (FIG.15) Caution ) Be sure to use seal tape for pipe screw to prevent a water

leakage.

Website: www.Veilux.net Phone # [phone]

<the cable

int

o the ceiling>

FIG. 13

<the cable out of the ceiling>

FIG. 14

PIPE MOUNT BRACKET

THREAD SEAL TAPE

BOTTOM COVER ASSEMBLY

MINI SPEED DOME CAMERA

FIG. 15

12

■

Rub b er 1 e a

■

S cr ew M 4 x 8 4 e a

Veilux Model # VP-58CND12X User Manual

INSTALLATION

E. GOOSENECK MOUNT TYPE

Contents

■ Gooseneck mount bracket 1ea

■ Set anchor bolt (W5/16) 4ea

1. If you want to install the speed dome on the concrete wall, you need to make 12.5mm diameter

4 holes by drill like FIG.16 (Depth 37mm)

2. Install SET ANCHOR BOLT on the holes.

3. As shown on FIG.17, after assembling mini PTZ and bottom cover assembly, drive the gooseneck

mount bracket and x. (FIG.17) Caution ) Be sure to use seal tape for pipe screw to prevent a

water leakage.

Website: www.Veilux.net Phone # [phone]

FIG. 16

<the cable into the ceiling> < the cable out of the ceiling>

GOOSENECK MOUNT BRACKET

THREAD SEAL TAPE.

BOTTOM COVER ASSEMBLY

MINI SPEED DOME CAMERA

FIG. 17

13

Contents

■ Wall mount bracket 1ea ■ Set Anchor Bolt (W5/16) 4ea

■ Hexagon Socket head cap screw M4.0 x16 4ea

■ Hexagon wrench 3mm L Type 1ea

<the cable out of the ceiling>

Veilux Model # VP-58CND12X User Manual

INSTALLATION

F. WALL MOUNT TYPE

1. If you want to install the speed dome on the concrete wall, you need to make 12.5mm diameter

4 holes by drill like FIG. 1 (Depth 37mm) (FIG.18)

2. Install SET ANCHOR BOLT on the holes.

3. To install Wall Mount Bracket

Tip> Select a ceiling board strong enough to hold 4 times the total weight of the camera

(Weight combined camera: approx.5kg)

FIG. 18

FIG. 19

<the cable into the ceiling>

Website: www.Veilux.net Phone # [phone]

14

Veilux Model # VP-58CND12X User Manual

INSTALLATION

4. Assemble a wall mount bracket and camera by Hexagon socket head cap screws

(M4.0X16) (FIG. 20)

FIG. 20

Website: www.Veilux.net Phone # [phone]

HEXAGON SOCKET HEAD CAP
SCREW M4.0x16 4EA

15

Contents

■ Corner mount adaptor 1ea ■ Set Anchor Bolt (W5/16) 4ea ■ M10 Bolt & Nut 4ea

Veilux Model # VP-58CND12X User Manual

INSTALLATION

G. CORNER MOUNT TYPE

1. First mark the positions of holes placing the corner mount bracket. (FIG. 21)

2. Make 12.5mm diameter 4 holes by drill. (Depth 37mm)

3. Install SET ANCHOR BOLT on the holes.

4. Fix the wanted bracket on the corner mount bracket with 4 ea of M10 BOLT before you install

the corner mount bracket. (FIG. 22)

5. Screw the set anchor bolt of the bracket by nut on the wall. (FIG. 23)

Website: www.Veilux.net Phone # [phone]

FIG. 21

mark the positions
of holes

M10.0 BOLT

GOOSENECK MOUNT
BRACKET

GOOSENECK MOUNT
BRACKET

CORNER MOUNT
BRACKET

CORNER MOUNT
BRACKET

FIG. 22

FIG. 23

16

Veilux Model # VP-58CND12X User Manual

INSTALLATION

6. After driving a bottom cover assembly to gooseneck mount bracket, as shown on FIG 23,

assemble mini PTZ with bottom cover assembly. (FIG. 24) Caution ) Be sure to use seal

tape for pipe screw to prevent a water leakage.

Website: www.Veilux.net Phone # [phone]

GOOSENECK MOUNT
BRACKET

CORNER BRACKET

THREAD SEAL TAPE

BOTTOM COVER ASSEMBLY

MINI SPEED DOME CAMERA

FIG. 24

17

Contents

■ Pole mount adaptor 1ea ■ Band Clamp 2ea ■ M10 Bolt & Nut 4ea

Veilux Model # VP-58CND12X User Manual

INSTALLATION

H. POLE MOUNT TYPE

1. Fix the wanted bracket on the pole mount bracket with 4 ea of M10 BOLT before you install the
pole mount bracket. (FIG. 25)

2. Tie the bracket with SUS BAND tightly. (FIG. 26)

3. As shown FIG. 26 after installing a wall mount bracket, x a camera on the wall mount bracket.

(FIG. 27)

Website: www.Veilux.net Phone # [phone]

FIG. 25

M10

BOLT

WALL MOUNT BRACKET

POLE MOUNT BRACKET

SUS

BAND

FIG. 26

HEXAGON SOCKET HEAD CAP SCREW
M4.0x16 4ea

FIG. 27

18

65 + preset

This feature is operated by preset number but not included in OSD main menu.

Veilux Model # VP-58CND12X User Manual

QUICK OPERATING KEYS

The dome supports Pelco-D/P, SAMSUNG and VICON protocols.

The dome may be used with any controller or DVR etc that supports the Pelco D and Pelco

P protocols.

The default setting of the dome is Pelco D / P with 2400 bps (baud rate).

[PELCO D/P, SAMSUNG PROTOCOLS]

The comprehensive feature set of the dome is available from Pelco compatible controllers via quick

operation keys as dened below.

1-64 + preset and 100~200 + preset are used for normal user presets.

Presets 65-99 + are reserved for special functions.

For example, to enter OSD MENU, press the button 95 +PRESET

<Quick Operation Key Table 1, Pelco D/P, SAMSUNG>

<Quick Operation Keys Table 2> Use these function keys if controller has these keys>

●

: “Preset Status” is displayed, to remove this screen, press Focus Near button.

●

92 + preset : This feature freezes the current live image during tour, auto scan or pattern opera-

tion. When you press 92 + preset button, the image freezes but the camera is still working as

per operation such as tour, pattern or auto scan. To return to normal images, press 92 + preset

button again.

● If a controller asks for an unsupported feature “Not available” is displayed on the monitor.

Website: www.Veilux.net Phone # [phone]

Number Note Function

1 ~ 64, 100~200 +Preset PRESET Execute Preset 1 ~ 64

65 + Preset PRESET STATUS Display Preset Status

66 +Preset AUTO SCAN Execute Auto Scan

67 +Preset AUTO FLIP Selectable On/Off/Auto in Auto Flip function

71~78 +Preset GROUP TOUR Execute Group Tour #1 ~ #8

81~88 +Preset PATTERN Execute Pattern #1 ~ #8

91 + Preset ZERO POSITION Search For Pan / Tilt Zero Position

92 + Preset FREEZE Select Freezing of current image

93 + Preset BLC MODE Selectable On/Off in BLC function

94 + Preset D/N MODE Selectable Day/Night Mode (Auto/Day/Night Mode)

95 + Preset OSD MAIN MENU To enter OSD Main Menu

96 + Preset FOCUS ADJUST Focus adjustment

97 +Preset ALARM Selectable Enable/Disable all Alarms

Menu Function

Tilt Up / Down Sub menu cursor moves up / down

Pan Left / Right Enter to the sub menu or status change or decrement

Focus Near Using for Enter key when user select YES or NO

Focus Far Using for function changing keys when set coordinate

Zoom Tele Status cursor to the right

Zoom Wide Status cursor to the left

19

Veilux Model # VP-58CND12X User Manual

QUICK OPERATING KEYS

[VICON PROTOCOL]

If user wants to choose Vicon Protocol, the user may change the dip switch rst.

(Refer to Page #36 DIP SWITCH SETTING - PROTOCOL) Baud Rate: 4800 (Vicon

default)

The operation system is almost same as Pelco D/P protocols but some special features are

different way as noted below’

<Quick Operation Key Table 2: VICON>

<Quick Operation Keys Table 2> Use these function keys if controller has these keys>

Website: www.Veilux.net Phone # [phone]

Number Note Function

1 ~ 79 +Preset PRESET Execute Preset 1 ~ 79

80~87 +Preset GROUP TOUR Execute Group Tour #1 ~ #8

88~89 +Preset PATTERN Execute Pattern #1 ~ #2

90 + Preset Focus Mode Set Focus Mode Toggle to Auto or Manual

90 + Preset Save Pan/Tilt Lockout PAN/TILT Lock or Unlock setting

91 + Preset Save ZERO POSITION Search For Pan / Tilt Zero Position

92 + Preset Save ALARM Selectable Enable/Disable all Alarms

93 + Preset Save BLC MODE Selectable On/Off in BLC function

94 + Preset Save OSD MAIN MENU To enter OSD Main Menu

95 + Preset Save D/N MODE Selectable Day/Night Mode (Auto/Day/Night Mode)

96 + Preset Save SECTOR SECTOR setting menu entrance

97 + Preset Save DOME Reset Initial DOME Reset - Rebooting

98 + Preset Save AUTO PAN AUTO PAN setting menu entrance

99 + Preset Save Pan/Tilt Speed Manual Pan/Tilt Max Speed setting

Menu Function

Tilt Up / Down Sub menu cursor moves up / down

Pan Left / Right Enter to the sub menu or status change or decrement

A/P Using for Enter key when user select YES or NO

A/I Using for function changing keys when set coordinate

Zoom Tele Status cursor to the right

Zoom Wide Status cursor to the left

20

CAMERA ID : 001

BAUD RATE : 2400 BPS

WAITING………

PAN ORIGIN TEST OK

TILT ORIGIN TEST OK

TX CONNECTION TEST OK

CAMERA COMM TEST OK

Veilux Model # VP-58CND12X User Manual

DIAGNOSTIC

Whenever the dome is powered on, a standard diagnostic is operated.

The following messages are displayed on the monitor.

A. Pan Origin Test

Zero point of Pan is located during the Panning test.

B. Tilt Origin Test

Zero point of Tilt is located during the Tilt test.

C. TX connection Test

The TX connection test looks for commands from a controller to the dome. If no commands are

detected the test will exit after 60 seconds.

During the 60 seconds, the camera must receive a signal from the controller or DVR, so please

operate the controller during this phase. As soon as the dome detects a command “OK” will be

displayed and the test will move on to the next step.

If the Tx connection test fails check the RS 485 wiring.

D. Camera Comm. Test

Camera communication is also checked.

OK should be displayed in these four tests before installation.

If all the above Tests are OK, “NOW EEPROM CHECKING” and “ALL DATA INITIALIZING” is dis-

played and the camera is ready to operate.

Website: www.Veilux.net Phone # [phone]

Veilux Model # VP-58CND12X User Manual

OSD ME NU S ETTING

A. OSD MENU TABLE

Website: www.Veilux.net Phone # [phone]

21

MAIN MENU DOME SETUP

CAMERA SET

AUTO SCAN

TOUR

PRAVACY

PATTERN

ALARM

SECTOR

EXIT

DOME SET

CAMERA ID : CAM1

RECOVER : OFF

MANUAL SPEED : 100 °/S

AUTO FLIP

: OFF

ZOOM SPEED : FAST

ALARM : DISABLE

LANGUAGE : ENGLISH

[NEXT PAGE]

SAVE AND EXIT

CAMERA SET

FLICKER : OFF/ON

MIRROR : OFF /ON

D ZOOM : OFF/ON

WB MODE

: AWB MODE

PIC FLIP : OFF/ON

BLC : OFF/ ON

D/N MODE : AUTO

DSS MODE : OFF/ON

EXIT

PRESET SET

PRESET NO: 001

PRESET ID: PRESET01

PAN:XXX.X.XX.X TILT:XXX.X.XX.X

SAVE

EXIT

AUTO SCAN SET

START ANGLE : XXX.X.XX.X

END ANGLE : XXX.X.XX.X

DIRECTION

: CW

ENDLESS : OFF/ON

SPEED : QUICK

DWELL TIME : 03

SAVE AND EXIT

EXIT

TOUR SET

TOUR NO. : 01

TOUR TITLE : TOUR01

TOUR STEP : 01

PRESET NO : 01

DWELL TIME : 3

SPEED : 20 0°/S

SAVE AND EXIT

EXIT

PRIVACY SET

PRIVACY NO. : 01

DISPLAY : ON/OFF

ACTION : MOVE/ADJUST

SAVE

EXIT

PATTERN SET

PATT NO. : 01

PATT TITLE PATTERN01

DATA FILL : 100 %

SAVE

EXIT

ALARM SET

ALARM NO. : 01

ALARM INPUT

: OFF

ALARM ACT : 01

SAVE

EXIT

SECTOR SET

SECTOR NO : 01

SECTOR ID : SECTOR01

SECTOR START: XXX.X.XX.X

SECTOR END : XXX.X.XX.X

SAVE

EXIT

DOME

SET

SYSTEM LOCK : OFF

[PASS WORD]

[OSD DISPLAY] [SYSTEM STATUS]

[INITIALIZATION]

[PREVIOUS PAGE]

OSD DISPLAY

CAMERA ID : OFF/ON

PRESET ID: OFF/ON

SECTOR ID: OFF ON

COORDINATE:ON/OFF

[PREVIOUS PAGE]

[SYSTEM STATUS]

PROTOCOL : PELCO D,P

BAUD RATE: 2400BPS

FIRMWARE VER.:2.00

UPGRADED DATE: 06.28,06 CAMERA MODULE: SDM100

[PREVIOUS PAGE]

[INITIALIZATION]

[TOUR CLEAR]

[PRESET CLEAR]

[SECTOR CLEAR]

[PRIVACY CLEAR]

[PATTERN CLEAR]

[LOAD OPTIMIZED DEFAULT

[REVIOUS PAGE]

22

ZOOM

DOME SET

CAMERA ID : CAM1 RE­COVER : OFF

MANUAL SPEED : 100°/S
AUTO FLIP : OFF

ZOOM SPEED : FAST

ALARM : DISABLE

LANGUAGE : ENGLISH

[NEXT PAGE]

SAVE AND EXIT

EXIT

MAIN MENU

DOME SETUP
CAMERA SET

PRESET

AUTO SCAN

TOUR

PRIVICY

PATTERN

ALARM

SECTOR

EXIT

* Use “ up down” to move the position and “ left right” to make selection

Veilux Model # VP-58CND12X User Manual

OSD MENU SETTING

To enter OSD Menu, press the button 95 + PRESET.

B. Dome Setup

In order to enter Dome setup, select right direction when the cursor is on dome setup.

DEFAULT SETTING

B-1. DOME SET - CAMERA ID

To set camera name, and select a title of up to 16 characters using left or right direction keys or

joystick.

Press TELE button to move to the next character from left to right direction and

ZOOM WIDE button to move to the next character from right to left direction (Space

displays when ￡ appears)

Website: www.Veilux.net Phone # [phone]

23

default setting is DISABLED.

This function can be recalled by pushing 97 + preset button.

DOME SET

SYSTEM LOCK: : OFF
[PASS WORD] [OSD
DISPLAY] [SYSTEM
STATUS] [INITIAL­IZATION] [PREVIOUS
PAGE]

The default setting is 100û/sec

The

default setting is FAST.

The default setting is ENGLISH.

The default setting is OFF.

Veilux Model # VP-58CND12X User Manual

OSD MENU SETTING

B-2. DOME SET - RECOVER

This feature allows the dome to revert to a specic programmed action when the dome has not

received a command for the recovery timer period.

Actions can be Auto scan, group tour and pattern. The recovery time can be programmed from

15 second to 90 seconds. The default setting is OFF.

B-3. DOME SET - MANUAL SPEED

The manual speed of Pan/Tilt is selectable from 100û/sec up to 150û/sec.

B-4. DOME SET - AUTO FLIP

Auto Flip enables the dome to automatically do a 180û turn when the tilt bottom point is reached.

default setting is OFF. This function can be recalled by pushing 67+ preset button.

B-5. DOME SET - ZOOM SPEED

Zoom speeds are selectable as FAST or SLOW mode. The

B-6. DOME SET - ALARM

You must enable the alarms for them to operate. The

B-7. DOME SET - LANGUAGE

Multiple languages are selectable (English, German, Dutch, Danish, French)

B-8. DOME SET - [NEXT PAGE]

DEFAULT SETTING

B-8-1. DOME SET - [NEXT PAGE] - SYSTEM LOCK

All stored dome settings can be password protected to prevent unauthorized changes.

In order to enter [PASS WORD] page, the system lock status must rstly be set as ON.

Website: www.Veilux.net Phone # [phone]

24

ENTER PASSWORD

BY ENTERING PRESET CODE

PASSWORD ***

CONFIRM ***

ENTER PASSWORD

BY ENTERING PRESET CODE

PASSWORD ***

CONFIRM ***NOT CORRECT

ENTER PASSWORD

BY ENTERING PRESET CODE

PASSWORD ***

CONFIRM ***CONFIRMED

OSD DISPLAY

CAMERA ID : OFF

PRESET ID : OFF

SECTOR ID : OFF

COORDINATE : ON [PRE­VIOUS PAGE]

Veilux Model # VP-58CND12X User Manual

OSD MENU SETTING

B-8-2. DOME SET - [NEXT PAGE] - [PASSWORD]

To enter this page to set a password, move joystick or pan key in the right direction.

The password must be set by preset number from 001 to 255 (Default 99)

Enter any number from 001~255 on the password blank area and again for conrmation on

blank area. Then “CONFIRMED” is displayed on the monitor and the menu will go back to the
previous page automatically.

<CONFIRMED> <CANCELLED>

If you press an incorrect number between PASSWORD and CONFIRM, “NOT CORRECT” is
displayed on the monitor.

B-8-3. DOME SET - [NEXT PAGE] - [OSD DISPLAY]

The camera ID setting denes whether the camera OSD display is displayed or switched off.

DEFAULT SETTING

Website: www.Veilux.net Phone # [phone]

* When a password has been set, the operator must enter the correct password in order to

enter OSD MAIN MENU, or to change any of the domes conguration

data

* If you set a password you must ensure that it does not get lost. If this happens the
dome

must be returned for workshop
repair

25

SYSTEM STATUS

PROTOCOL : PELCO D, P

BAUD RATE : 2400 BPS

FIRMWARE VER. : X.XX

UPGRADED DATE : YY.MM.DD

CAMERA MODULE : XXXXXXXX
[PREVIOUS PAGE]

INITIALIZATION

[TOUR CLEAR] [PRESET
CLEAR] [SECTOR CLEAR]
[PRIVACY CLEAR] [PATTERN
CLEAR] [LOAD OPTIMIZED DE­FAULT] [PREVIOUS PAGE]

TOUR CLEAR

ARE YOU SURE? YES NO

TOUR CLEAR

Veilux Model # VP-58CND12X User Manual

OSD MENU SETTING

B-8-4. DOME SET - [NEXT PAGE] - [SYSTEM STATUS]

This page shows the information of this camera.

DEFAULT SETTING

- Protocol and baud rate are shown according to the dip switch setting (Refer to page 36,

37)

- Firmware version and upgraded date will be changed if the dome has been upgraded.

- The camera module type is stated as follows.

● SDM100 : SAMSUNG 10X ZOOM CAMERA MODULE.

B-8-5. DOME SET - [NEXT PAGE] - [INITIALIZATION]

To clear the current settings select the item that you wish to reset back to factory defaults.

- To clear the memorized data, move the joystick or pan right key until the cursor is on the
required item.

Website: www.Veilux.net Phone # [phone]

26

LOAD OPTIMIZED DEFAULT

ARE YOU SURE? YES NO

ALL DATA INITIALIZING

Veilux Model # VP-58CND12X User Manual

OSD MENU SETTING

Press FOCUS NEAR button when the cursor is at YES in order to clear memorized data.

Then each item such as tour, preset, and sector will icker for about 2~3 seconds. After this

process, the menu is returned to the previous page.

- To clear all data and return to factory defaults, move the joystick right or press the
pan

right key to when the cursor is at [LOAD OPTIMIZED DEFAULT] to enter the next page.

- Move joystick or the pan right keys so that the cursor is over YES, then press the
FOCUS NEAR button.

“ALL DATA INITIALIZING” is then displayed for about 5~7 seconds and then the menu is re­turned to the previous page automatically.

B-9. DOME SET - [NEXT PAGE] - SAVE AND EXIT

To save the memorized data and escape this page, move the joystick right or press the pan right
key when cursor is at SAVE AND EXIT.

B-10. DOME SET - [NEXT PAGE] - EXIT

In order to escape this page, move the joystick right or press the pan right key when the cursor
is at EXIT

Website: www.Veilux.net Phone # [phone]

* Use the above method for [PRESET CLEAR], [SECTOR CLEAR], [PRIVACY CLEAR],

[PATTERN CLEAR], [TOUR
CLEAR].

27

CAMERA SET

FLICKER : OFF

MIRROR : OFF

APERTURE : 10

D ZOOM : OFF

WB MODE : AWB MODE

PIC FLIP : OFF

BLC : OFF

D/N MODE : AUTO

DSS MODE : OFF

EXIT

The default setting is OFF.

The default setting is OFF.

default seeting is 10.

Veilux Model # VP-58CND12X User Manual

OSD MENU SETTING

C. CAMERA SET

DEFAULT SETTING

C-1. CAMERA SET - FLICKERLESS

The icker less feature has options of 50Hz and 60Hz.

The default setting is OFF (NTSC: 60Hz / PAL: 50Hz). The icker less mode only needs to be

set when there is a mismatch between the power frequency and camera sync rate.

C-2. CAMERA SET - MIRROR

This feature literally swaps the image left and right as if looking into a mirror.

C-3. CAMERA SET - APERTURE

Aperture correction enhances the picture details and sharpness by increasing the gain of the
caemra. Increade the value to sharpen the image, decrease to soften it The
(the aperture level is from 01 ~ 15)

C-4. CAMERA SET - D ZOOM

If neabled digital zoom is applied when the zoom lens has reached its maximum optical zoom in
capability The default setting is OFF.

C-5. CAMERA SET - WB MODE

White balance functions has 4 modes and may need to be changed depending on the situation.

● AWB Mode – 3,200ûK to 6, 000ûK (Default)

● Indoor – up to 3,200ûK

● Outdoor – up to 5,800ûK

● ATW Mode - 2,000ûK to 10, 000ûK

Website: www.Veilux.net Phone # [phone]

28

The default setting is OFF.

The default setting is AUTO MODE.

The default setting is OFF.

Veilux Model # VP-58CND12X User Manual

OSD MENU SETTING

C-6. CAMERA SET - PIC FLIP

The picture ip feature swps the top and bottom of the image, literally inverting it.

C-7. CAMERA SET - BLC (Back Light Compensation)

The default setting is OFF and BLC modes can be OFF/ON.

● OFF – Backlight compensation is not activated.

● ON – Back light compensation is activated.

This function can be recalled by pushing 93 + preset button.

C-8. CAMERA SET - D/N MODE

The dome camera can operate in day /night mode and will switch depending on lighting

conditions. Alternatively it can be forced into color only mode.

This function can be recalled by pushing 94 + preset button.

C-9. CAMERA SET - DSS MODE (DIGITAL SLOW SHUTTER)

If digital slow shutter is enabled the exposure time of the camera is increased, this allowing
more light to be collected and improving low light response. This setting should not be enabled

if the dome is touring at night or fast moving objects are likely to be in the scene as smearing is

also increased.

C-10. CAMERA SET - EXIT

To escape this page, move the joystick right or press the pan right key.

Website: www.Veilux.net Phone # [phone]

29

The

PRESET SET

PRESET NO :001

PRESET ID :PRESET001-------

PAN :XXX.XX TILT : XXX.XX

SAVE

EXIT

Veilux Model # VP-58CND12X User Manual

OSD MENU SETTING

D. PRESET SET

To enter PRESET SET, move joystick to the right direction.

DEFAULT SETTING

D-1. PRESET - PRESET NO.

Up to 165 preset positions are available. Use the joystick or pan left/right keys to select the
number.

D-2. PRESET - PRESET ID

To create preset titles use the joystick or pan left/right keys to navigate the menu.

ZOOM TELE button moves to the next character from left to right and ZOOM WIDE

button moves to the next character from right to left (Space displays when £ appears)

D-3. PRESET - PAN: XXX.X TILT: XX.X

Press FOCUS FAR button in order to set preset position then, use the joystick or pan left/right
keys to the position where memorized preset number .is needed. Then press FOCUS FAR but­ton again after setting a preset location.

D-4. PRESET - SAVE

Move the joystick right or press the pan right key when the cursor is at SAVE and then the
cursor will be located on Preset ID for the continuous preset No. setting.

D-5. PRESET - EXIT

To escape this page, move the joystick right or press the pan right button.

Website: www.Veilux.net Phone # [phone]

30

FOCUS FAR button again is to escape.

FOCUS FAR button again is to escape.

AUTO SCAN SET

START ANGLE : XXX.X.XX.X
END ANGLE : XXX.X.XX.X

DIRECTION : CW

ENDLESS : OFF
SPEED : 10°/S

DWELL TIME : 03

SAVE AND EXIT

EXIT

The default setting is OFF.

default setting is 10û/S.

The default setting is 03 seconds.

Veilux Model # VP-58CND12X User Manual

OSD MENU SETTING

E. AUTO SCAN SET

DEFAULT SETTING

E-1. AUTO SCAN - START ANGLE

To set the start position, press FOCUS FAR button then move the dome to the required start
position. Press

E-2. AUTO SCAN - END ANGLE

To set the end position, press FOCUS FAR button then move the dome to the required end
position. Press

E-3. AUTO SCAN - DIRECTION

Auto Scan directions are available as CW or CCW.

● CW: Clock wise direction (Default)

● CCW: Count Clock Wise Direction.

E-4. AUTO SCAN - ENDLESS

Auto Scan can be set to endless rotation by enabling the endless option.

E-5. AUTO SCAN - SPEED

Auto scan speed can be programmed from 05û/S up to 35û/S.

The

E-6. AUTO SCAN - DWELL TIME

The dwell time at the start and end points can be programmed from 1 second to 30 seconds.

E-7. AUTO SCAN - SAVE AND EXIT

To save the memorized data and escape this page, move the joystick right or press the pan
right key when the cursor is at SAVE AND EXIT.

E-8. AUTO SCAN - EXIT

To escape this page, move the joystick right or press the pan right key.

Website: www.Veilux.net Phone # [phone]

*

66 + pre­set

button is working as AUTO SCAN after set­ting.

31

The default setting is 200û/S.

TOUR SET

TOUR NO : 01
TOUR TITLE : TOUR01

TOUR STEP : 01

PRESET NO. : 01

DWELL TIME : 03

SPEED : 200 /S

SAVE

EXIT

The default setting is BLK

setting is 03 seconds.

Veilux Model # VP-58CND12X User Manual

OSD MENU SETTING

F. TOUR SET

8 Programmable tours can be set and each tour can have up to 64 preset steps.
After setting up the tours the 71~78 + preset buttons launch group tours # 1~8

DEFAULT SETTING

F-1. TOUR SET - TOUR NO.

Up to 8 group tours can be programmed.

F-2. TOUR SET - TOUR TITLE

To set a tour title, use the joystick left/right or pan left/right keys.

Each title can have up to 16 characters.

Press

ZOOM TELE button to move the next character from left to the right and ZOOM WIDE

button to move the next character from right to left (Space displays when appears) The tour
title is not displayed on the monitor and is only for the reference of user.

F-3. TOUR SET - TOUR STEP

Each tour group consists of up to 60 preset steps with different dwell time and speed.

It is possible to match any preset # for any tour step.

F-4. TOUR SET - PRESET NO.

For each tour step it is possible to select any preset number up to 64.

F-5. TOUR SET - DWELL TIME

Dwell time can be programmed from 1-99 seconds. The default

F-6. TOUR SET - SPEED

Each tour step can be set with a different speed up to 200û/S and it is selectable from 10û/S.

F-7. TOUR SET - SAVE

To save the memorized data and escape this page, move the joystick right or press the pan
right key when cursor is at SAVE

F-8. TOUR SET - EXIT

To escape this page, move the joystick right or press the pan right key.

Website: www.Veilux.net Phone # [phone]

32

FOCUS FAR button to escape the ADJUST mode.

PRIVACY SET

PRIVACY NO : 01
DISPLAY : OFF

ACTION : MOVE

SAVE

EXIT

default setting is OFF.

Veilux Model # VP-58CND12X User Manual

OSD MENU SETTING

G. PRIVACY SET

4 Privacy masking zones can be set.

DEFAULT SETTING

G-1. PRIVACY SET - PRIVACY NO.

Up to 4 privacy masking zones can be set.

G-2. PRIVACY SET - DISPLAY.

Move the joystick right or left or press pan right/left to set ON in order to show the selectable
block in the center of the monitor. This block appears as a translucent square with blue color
when set ON. The

G-3. PRIVACY SET - ACTION (MOVE / ADJUST)

To set the blocking area, press FOCUS FAR button when MOVE MODE is displayed.

Then use the joystick or pan keys to the user dened area in order to set the blocking area.

Then press FOCUS FAR button again to escape from MOVE MODE.
To adjust the size of the blocking area, move the joystick or use the pan keys when the cursor is
on ACTION. After it has changed to ADJUST MODE, press FOCUS FAR button in order to
adjust the size of the blocking area. The size of the blocking area can be adjusted by using
joystick up/down or left right – or the pan and tilt keys. After adjusting the size of the blocking
area, press

● ADJUST : You can change the masking size by using the joystick or pan keys

● MOVE : You can move the masking area by using the joystick or pan keys (Default)

G-4. PRIVACY SET - SAVE

After setting the privacy masking zone, to save the data, move the joystick right or pan right key
when the cursor is on SAVE. After saving the data, the cursor moves to PRIVACY NO.2 auto­matically to prepare for the next privacy masking zone.

G-5. PRIVACY SET - EXIT

To escape this page, move the joystick right.

Website: www.Veilux.net Phone # [phone]

33

PATTERN SET

PATT NO : 01

PATT TITLE: PATTERN01□□□□□□□

DATA FILL : 0%

SAVE

EXIT

Veilux Model # VP-58CND12X User Manual

OSD MENU SETTING

H. PATTERN SET

8 programmable patterns are available, each with a programmable title.

After setting up each pattern # 1~8, 81~88+ preset buttons will recall Patterns # 1~8.

DEFAULT SETTING

H-1. PATTERN SET - PATT NO.

Up to 8 programmable user-dened patterns are available.

H-2. PATTERN SET - PATT TITLE

To set PATTERN TITLE move Joystick left/right or use the pan keys.

Press

ZOOM TELE button moves to the next character from the left / right and ZOOM WIDE
button moves to the next character from the right / left (Space displays when ￡ appears) The
pattern title is not displayed on the monitor, but only for the reference of the user.

H-3. PATTERN SET - DATA FILL

To memorize a pattern, press FOCUS FAR button in order to start the process.

The progress is shown as % lled. Press FOCUS FAR button again in order to escape.

H-4. PATTERN SET - SAVE

To save the memorized pattern data, move the joystick right or press the pan right key when the
cursor is on SAVE. Then the cursor moves to the PATT NO.02 in order to prepare for the next
pattern.

H-5. PATTERN SET - EXIT

To escape this page, move the joystick right or press the pan right key.

Website: www.Veilux.net Phone # [phone]

34

ALARM SET

ALARM NO : 01
ALARM INPUT : OFF
ALARM ACT : 001

SAVE

EXIT

The default setting is OFF.

Veilux Model # VP-58CND12X User Manual

OSD MENU SETTING

I. ALARM SET

4 Alarm inputs are available and each input can activate presets, group tours or patterns.

DEFAULT SETTING

I-1. ALARM SET - ALARM NO.

Up to 4 alarms are selectable by using joystick right or pressing the pan right key when the
cursor is on ALARM NO.

I-2. ALARM SET - ALARM INPUT

Alarm inputs can be programmed as NC (Normally Close) or NO (Normally Open)

I-3. ALARM SET - ALARM ACT

Active alarms can trigger modes such as presets, Group tours 1-8, and Patterns 1-8.

Use the joystick or pan keys to select any preset number, group tour no. or pattern no.

I-4. ALARM SET - SAVE

After setting up the alarm features, to save the data move the joystick right or press the pan
right key when the cursor is on SAVE. After saving the data, the cursor moves to Alarm NO.2
automatically to prepare for the next alarm.

I-5. ALARM SET - EXIT

To escape this page, move the joystick right or press the pan right key.

Website: www.Veilux.net Phone # [phone]

* Before activating Alarms, you must set ALARM ENABLE at DOME SET – ALARM – EN­ABLE

(Refer to page

23)

35

FOCUS FAR button again to escape.

SECTOR SET

SECTOR NO : 01

SECTOR ID: SECTOR01□□□□□□□□

SECTOR START: XXX.X.XX.X

SECTOR END : XXX.X.XX.X

SAVE

EXIT

Start Position

End Position

Veilux Model # VP-58CND12X User Manual

OSD MENU SETTING

J. SECTOR SET

Up to 8 programmable sectors are available, each with a 16 character title.

This feature allows the various areas of the domes 360û rotation to be given logical titles.

When the dome is moved the relevant title for each area is displayed as the dome
passes through the area.

DEFAULT SETTING

J-1. SECTOR SET - SECTOR NO.

Up to 8 programmable sectors are available.

J-2. SECTOR SET - SECTOR ID

To set a SECTOR ID, use the joystick or pan left/right keys.

Press ZOOM TELE button to move to the next character from left to right and ZOOM WIDE

button to move to the next character from right to left (Space displays when ￡ appears)

J-3. SECTOR SET - SECTOR START

To set a SECTOR START position, press FOCUS FAR button then move the joystick or pan
keys to set the position. Press

J-4. SECTOR SET - SECTOR END

To set a SECTOR END position, press FOCUS FAR button then move the joystick or pan keys
to set the position. To press FOCUS FAR button again to escape.

J-5. SECTOR SET - SAVE

After setting the SECTOR positions, to save the data move the joystick right or press the pan
right key when the cursor is on SAVE. After saving the data, the cursor moves to SECTOR NO.2
automatically to prepare for the next SECTOR.

J-6. SECTOR SET - EXIT

To escape this page, move the joystick right or press the pan right key.

K. EXIT

To escape OSD Main Menu, move joystick to the right or left direction then this camera is

Ready to operate.

Website: www.Veilux.net Phone # [phone]

36

* Factory default: Camera ID = 1, PELCO-D Baud Rate: 2400bps

Protocol

ID Set

Veilux Model # VP-58CND12X User Manual

DIP SWITCH SETTING

A. FACTORY DEFAULT SETTING

The dome cameras RS 485 address is set using switches 1-6 of DIP SW1, refer to the
table below...

Open the camera case to set ID using DIP SW1.

Termination

Baud rate

B. ID SETTING (1-ON, 0-OFF) (1è10)

Website: www.Veilux.net Phone # [phone]

DIP SW ID VALUE DIP SW ID VALUE DIP SW ID VALUE

100000XXXX 1 111010XXXX 23 101101XXXX 45

010000XXXX 2 000110XXXX 24 011101XXXX 46

110000XXXX 3 100110XXXX 25 111101XXXX 47

001000XXXX 4 010110XXXX 26 100011XXXX 48

101000XXXX 5 110110XXXX 27 100011XXXX 49

011000XXXX 6 001110XXXX 28 010011XXXX 50

111000XXXX 7 101110XXXX 29 110011XXXX 51

000100XXXX 8 011110XXXX 30 001011XXXX 52

100100XXXX 9 111110XXXX 31 101011XXXX 53

010100XXXX 10 000001XXXX 32 011011XXXX 54

110100XXXX 11 100001XXXX 33 111011XXXX 55

001100XXXX 12 010001XXXX 34 000111XXXX 56

101100XXXX 13 110001XXXX 35 100111XXXX 57

011100XXXX 14 001001XXXX 36 010111XXXX 58

111100XXXX 15 101001XXXX 37 110111XXXX 59

000010XXXX 16 011001XXXX 38 001111XXXX 60

100010XXXX 17 111001XXXX 39 101111XXXX 61

010010XXXX 18 000101XXXX 40 011111XXXX 62

110010XXXX 19 100101XXXX 41 111111X XXX 63

001010XXXX 20 010101XXXX 42

101010XXXX 21 110101XXXX 43

011010XXXX 22 001101XXXX 44

37

Factory Default: Pelco-D or Pelco-P (Auto detection)

Veilux Model # VP-58CND12X User Manual

DIP SWITCH SETTING

C. PROTOCOL SETTING

7th~8

th

dip switches are used for Protocol Setting.

D. BAUD RATE SETTING

The 9

th

Dip Switch is used for BAUD RATE setting.

DIP SW can be changeable to 2400bps, 9600bps.

Factory Default: 2400bps. (If user selects Vicon protocol, then Baud rate is automatically set

as 4800bps.

E. 485 TERMINATIONS

10

th

Dip Switch is used for 100Ω termination.

Set on 10

th

Dip Switch only for the last looped camera from the controller.

Even in case of only one camera, set on 10

th

Dip Switch of the camera.

Website: www.Veilux.net Phone # [phone]

DIP SW1- 7 DIP SW1- 8

OFF OFF Pelco-D or Pelco-P

ON OFF VICON

OFF ON SAMSUNG

ON ON

DIP SW1 9

th

BAUD RATE

OFF

2400bps(Default)
4800bps(VICON)

ON 9600bps

TERMINATION
SW-ON

CAM 1 CAM 2 CAM n-1 CAM n

38

Veilux Model # VP-58CND12X User Manual

TROUBLE SHOTING

If you have trouble setting up or operating the camera, refer to the following.

Website: www.Veilux.net Phone # [phone]

PROBLEM SOLUTION

No operation

Check if the power supply is DC12V.

Check if RS-485 communication cable is connected correctly.

Check camera ID setting.

Check the RS 485 termination.

No picture

Check if all the cables are connected correctly.

Check if the monitor is adjusted correctly.

Check for video locally at the dome.

Dark screen Check video termination and monitor settings

Abnormal camera

operation

Check if PSU voltage level at the dome

Check the RS 485 termination.

39

Veilux Model # VP-58CND12X User Manual

SPECIFICATIONS

DIMENSIONS

Website: www.Veilux.net Phone # [phone]

MODEL 12X Mini Speed Dome Camera

PAN /TILT

Pan Rotation Angle 360 Endless

Pan Speed

Manual Preset Max 150 /sec Max 200 /sec

Tilt Rotation Angle 0 ~ 90

Tilt Speed

Manual Preset Max 150 /sec Max 150 /sec

FUNCTIONS

Presets

165 positions with a 16-character label available for each

Privacy Masking Zones 4 Programmable privacy masking zones

Pattern 8 Programmable pattern tour

Sector 8 Programmable sectors

Group Scanning

Max.8 Programmable group tours (each one consisting of up to
60 preset steps with different steps)

Auto scan Programmable Auto scan

Password Protection Yes

Alarm Input 4 alarms OFF/NC/NO (with various programmable states)

Alarm Actions Activate preset, tour and patterns

Auto Flip ON / OFF

OSD Menu Multiple Languages on screen

Communication RS-485

Protocol Pelco D/P, VICON, SAMSUNG

POWER Power Consumption

12V DC 750mA, 10W MAX (1.3A, 16W MAX with Heater)

Power Supply 12V DC 750mA (1.3A with Heater)

OTHERS

Construction Anti-vandal bubble (Poly carbonate), Body (Aluminum)

Motor Type Stepper Motor

Operating Temperature -10 C ~ 50 C (-40 C ~60 C with heater)

Certications IP66,CE,FCC

Image Sensor 1/4” Sony Super HAD CCD

CAMERA
MODULE

Total Image Pixels

NTSC

PAL

811(H) * 508(V) 410K 795(H) * 596(V)
470K

Number Of Effective
Pixels

NTSC PAL

768(H) * 494(V) 380K 752(H) * 582(V)
440K

Horizontal resolution 560 TV Lines/ B/W 660 TV Lines

Lens

Optical 12x Optical Zoom f=3.94 ~ 46.05mm (F1.67~1.88)

Digital 12x (192x with optical)

Day & Night (ICR) Auto/ Day/ Night

Digital Slow Shutter ON / OFF

Min. illumination

Normal mode
Night mode

0.2Lux / F1.6 (Color: 50IRE) 0.04Lux / F1.6
(B/W : IRC ON)

Luminance S/N Ratio More than 502B

Video Output Composite video output 75Ω Terminated

BLC ON / OFF

Flicker less

NTSC PAL ON / OFF (1/100) ON / OFF (1/120)

WHITE BALANCE ATW/AWC/INDOOR/OUTDOOR

Website: www.Veilux.net Phone # [phone]

40

Veilux Model # VP-58CND12X User Manual

UNITS : mm