Veeder-Root TLS-350 Series, 329956-001, 329950-001, 329357-001, 329399-001 Installation Manual

Manual No: 576013-813 ● Revision: D

Installation Guide

TLS-350 Series Sensor Modules

Notice

Veeder-Root makes no warranty of any kind with regard to this publication, including, but not limited to, the
implied warranties of merchantability and fitness for a particular purpose.

Veeder-Root shall not be liable for errors contained herein or for incidental or consequential damages in
connection with the furnishing, performance, or use of this publication.

Veeder-Root reserves the right to change system options or features, or the information contained in this
publication.

This publication contains proprietary information which is protected by copyright. All rights reserved. No part
of this publication may be photocopied, reproduced, or translated to another language without the prior written
consent of Veeder-Root.

DAMAGE CLAIMS

1. Thoroughly examine all components and units as soon as they are received. If damaged, write a complete
and detailed description of the damage on the face of the freight bill. The carrier's agent must verify the
inspection and sign the description.

2. Immediately notify the delivering carrier of damage or loss. This notification may be given either in person
or by telephone. Written confirmation must be mailed within 48 hours. Railroads and motor carriers are
reluctant to make adjustments for damaged merchandise unless inspected and reported promptly.

3. Risk of loss, or damage to merchandise remains with the buyer. It is the buyer's responsibility to file a claim
with the carrier involved.

RETURN SHIPPING

For the parts return procedure, please follow the appropriate instructions in the "General Returned Goods
Policy" and "Parts Return" pages in the "Policies and Literature" section of the Veeder-Root North American
Environmental Products price list.

© Veeder-Root 2003. All rights reserved

.

Table of Contents

i

Introduction

Contractor Certification Requirements ..............................................................................1

Related Manuals ...............................................................................................................1

Safety Precautions ............................................................................................................2

Warnings and Important Notes .........................................................................................2

Installation

Module/Connector Positions .............................................................................................3

Installing Modules .............................................................................................................3

Connecting Sensor Wiring to Modules ..............................................................................5

Figures

Figure 1. CPU/ECPU Boards - Battery Backup Switch in On Position ..................4

Figure 2. Locating the intrinsically safe bay in the TLS Console ...........................5

Figure 3. Type A Interface Module Wiring Diagram ...............................................6

Figure 4. Interstitial Sensor Interface Module Wiring Diagram ..............................7

Figure 5. Type B Interface Module Wiring Diagram ...............................................7

Figure 6. Vapor Sensor Interface Module Wiring Diagram ....................................8

Figure 7. Groundwater Sensor Interface Module Wiring Diagram .........................8

Table of Contents

ii

Introduction

This manual contains procedures for the installation or replacement of the following sensor interface modules:

• Veeder-Root Type A Interface Module
Part No. 329956-001 (with console)

• Veeder-Root Type B Interface Module
Part No. 329950-001 (with console)

• Veeder-Root Vapor Sensor Interface Module
Part No. 329357-001 (with console)

• Veeder-Root Groundwater Sensor Interface Module
Part No. 329399-001 (with console)

• Veeder-Root Interstitial Sensor Interface Module
Part No. 329358-001 (with console)

The above parts are for TLS 350 Series Consoles designed and manufactured by Veeder-Root. This manual
assumes all preliminary site preparation is completed, and that field wiring from the sensor junction box to the
console is in place.

Contractor Certification Requirements

Veeder-Root requires the following minimum training certifications for contractors who will install and setup the
equipment discussed in this manual:

Level 1 Contractors holding valid Level 1 Certification are approved to perform wiring and conduit routing,
equipment mounting, probe and sensor installation, tank and line preparation, and line leak detector installation.

Level 2/3 Contractors holding valid Level 2 or 3 Certifications are approved to perform installation checkout,
startup, programming and operations training, troubleshooting and servicing for all Veeder-Root Tank Monitoring
Systems, including Line Leak Detection and associated accessories.

Warranty Registrations may only be submitted by selected distributors.

Related Manuals

If site preparation or field wiring is necessary, you must refer to the following manual for installation instructions:

576013-879 TLS-3XX Series Consoles Site Prep and Installation Manual

1