Veeder Root S628 AWESOME Temp. Indicator Catalog Page
DYNAPAR brand
VEEDER-ROOT brand
Process Indicators
Process Indicators
S628 AWESOME Temp. Indicator
Temperature indicator
with blazing bright, large
display… changes color
when reaches alarm value
The Veeder-Root brand S628 Temperature Indicator is a member of a
family of 1/8 DIN instruments which offer breakthrough display technology as well as easy-to-program user setup. Its large LED display
features the ability to change color based on process status such as
exceeding an alarm value. Therefore, when monitoring temperature as
a critical value, the S628 provides operators with an instant visual alert
to changes in the application's status.
■ AWESOME 0.71” high digit LED display (27% larger than other 1/8
DIN units)
■ Programmable color change display based on an event
■ Programmable help function and secondary legend display
■ Field configurable alarm outputs
■ Max. and min. value capture
■ Plug in option cards include: 2nd relay, digital input, linear output,
and RS-485 communication
■ Accepts most standard thermocouple types and 3 & 4 wire RTDs
■ Standard outputs: 2 NPN transistors & 1 relay (optional 2nd relay)
■ 250 ms sample time with 0.1% accuracy
■ CE approved
Selection of input type is done easily from the front panel. Programmable filtering is used to ensure an accurate display even in electrically
noisy environments, while a programmable offset value can be used to
correct for known errors in the process. The two alarms can be setup
for high or low operation, reverse or direct acting, and can be latched.
SPECIFICATIONS
Sensor Input: B, J, K, N, S, and T thermocouples
Accuracy: ±0.1% of span
Sample Rate: 250 ms
Resolution: 14 bits
Sensor Break: Detected within 2 seconds
Control Inputs: Sourcing, Edge Sensitive
Logic Low ≤ 2.0 VDC, Logic High ≥ 3.0
Impedance: 4.7 KΩ to + voltage - Sourcing
Response Time: 25 ms
Function: Programmable
Outputs: Solid State: NPN open collector, 30 VDC max., 100 mA max.
Relay: SPDT, 5A resistive@ 110 VAC
Latency: 75 µ seconds, plus 8 ms for relay pull-in
Linear Outputs: 0-20mA, 4-20mA, 0-10V, 2-10V, 0-5V, 1-5V
Accuracy: ±0.25% (mA at 250Ω, V at 2kΩ); degrades linearly to ±0.5%
Resolution: 8 bits in 250ms (10 bits in 1s typ.)
Update: Approximately 4/s
Load Impedance: mA ranges: 500Ω max.; V ranges: 500Ω min.
Communication: RS-485; Serial asynchronous, UART to UART;
Open ASCII: One start bit, even parity seven data bits, one stop bit;
Baud Rate selectable from 9600, 4800, 2400, or 1200
Maximum Zones: 99
Supply Voltage: 90-264 VAC, 50/60 Hz, or 20-50 VAC/VDC; 4 Watts
Accessory Power Supply: 24 VDC @ 30 mA
Display: Red/Green, 7 segment LED
Primary display: 5 digits, 0.71" (18mm) height
Secondary display: single digit, 0.3" (7mm) height
Annunciators: Output 1 & Output 2 status
Dimensions: 48mm x 96mm, 110mm deep
Mounting: Panel mount (mounting bracket supplied), 45mm x 92mm
cutout
Connections: Screw type terminals - combination head
Front Panel Rating: NEMA 4X/IEC IP65
Case Material: GE Lexan 940
Weight: 0.56 lbs.
Operating Temp.: 0° to 55° Celsius, 32° to 131° Fahrenheit
Storage Temp.: -20° to 80° Celsius, -4° to 176° Fahrenheit
Relative Humidity: 20% to 95% non-condensing
Approvals: CE
Ordering Information:
Linear Output
S62
Dimensions:
VEEDER-ROOT
VEEDER-ROOT
8
2nd Relay
Option
0 None
1 2nd Relay
82344
RST
PGM
96mm
Panel Cutout: 45mm x 92mm (1.77" x 3.62")
Option
0 None
3 Linear Output
1
OP1
OP2
48mm
Power Supply
0 90-264 VAC
2 20-50 VAC/VDC
Serial
Communication
Option
0 None
5 RS-485
6 Digital Input
100mm
10mm
9
P
R
O
C
E
S
S
I
N
D
I
C
A
T
O
R
S
DANAHER INDUSTRIAL CONTROLS
9.07
Loading...