VEEDER-ROOT brand
Electronic Totalizing Counters
A compact totalizing counter module for printed circuit board or panel
mounting. 8 digit, 8mm high, LCD display with backlight capability. An
external lithium battery (not supplied), is normally used to support
memory and counting. Current demand is typically 3µA quiescent, 6µA
counting. Backlight requires additional current.
Count speeds to 10kHz are possible. An internal contact-bounce filter
allows accurate counting from switch or relay contacts.
Electrical connections are made via rear pins which may be soldered to
a host printed circuit board or connected by pin terminals. A remote
electronic reset to zero is provided.
■ 8 digit high contrast LCD characters
■ 8mm high digit size
■ Quiescent current less than 3µA
■ Display backlight capability
■ Remote reset input
MicroMITE 7999F8-302
High speed totalizing counter
with backlighted display… maximum visual impact in a small
package
Dimensions:
48mm
37mm
24mm
13mm
14.0mm
1
E
T
L
O
E
T
C
A
T
L
R
I
O
Z
N
I
I
N
C
G
An ideal choice where maximum display impact is wanted in a small
area. Typical applications include test instruments, and cycle or event
counting.
SPECIFICºATIONS
Supply voltage: 2.7 - 3.3VDC
Current consumption: 3µA quiescent, 6µA counting (typical); backlight
80mA
Display: 8 digit black LCD, 8mm characters with leading zero blanking
Count Range: 99999999 display rollover to 0
Count Inputs:
maximum, negative edge triggered, 0.7v threshold, 25mS minimum
pulse length;
High Speed:
triggered, 0.7v threshold, 18v maximum, 50µS minimum pulse width
Reset Input: Contact closure/open collector, negative edge triggered,
0.7v threshold, 18V maximum, 15mS minimum pulse
Operating temperature: 0°C to +50°C
Storage temperature: -20°C to +70°C
Low Speed:
TTL/CMOS compatible, 10kHz maximum, positive edge
contact closure/open collector, 30Hz
Model Number Description
07999F8-302 Totalizing Counter, unidirectional, display backlight
DANAHER INDUSTRIAL CONTROLS
1.09