Veeder Root C628 Preset & Batch Counters Catalog Page

VEEDER-ROOT brand

RECOGNIZED

VEEDER-ROOT brand

Electronic Predetermining Counters

C628 Preset & Batch Counters

AWESOME preset & batch counters with large,

P R

I N G

blazing bright, color changing displays

All in the family - Matching C628 series products in other sections of this catalog:

C628 Totalizers: Section 1 C628 Rate Meters: Section 4 C628 Elapsed Timers: Section 5

File No.: E185087

The Veeder-Root brand C628 Counters are members of a family of 1/8 DIN instruments which offer breakthrough display technology as well as easy-to-program user setup. The large LED display features the ability to change color based on process status such as exceeding the count preset. Therefore, when monitoring count, position, length, or other critical values, the C628 provides operators with an instant visual alert to changes in the application's status.

■ AWESOME 0.71” high digit LED display (27% larger than other 1/8

DIN units)

■ Programmable color change display based on an event

■ Batch units - Independent display of background total

■ Programmable help function and secondary legend display

■ Dual preset units - Preset 1 programmable as absolute value or

prewarn which tracks Preset 2

■ Choice of NPN or PNP primary input

■ Filter speed settable for 20, 200, or 10,000 Hz

■ Standard Outputs: 1 NPN transistor (2 NPN transistors on Dual &

Batch units) & 1 relay (optional 2nd relay on Dual & Batch units)

■ Front panel reset enable and preset lockout

■ Optional RS-485 plug in card

■ CE approved, UL, CUL recognized

Single (C628-7XXX) and dual (C628-8XXX) preset models are available with programmable latched or timed output operation. A batch model (C628-9XXX) also has a preset tied to output 1 as well as a batch preset tied to output 2. This model displays count, batch value, and background total.

SPECIFICATIONS

Count Inputs: Sinking/Sourcing or Contact Closure

Frequency: 10 kHz max. (5 kHz Quadrature) Logic Low ≤ 2.0 VDC, Logic High ≥ 3.0, 30V max. Impedance: 10 KΩ to common - Sourcing; 4.7 KΩ to +Voltage Sinking

Calibrator: Multiplier 0.0001 to 9.9999 Control Inputs: Sinking, Edge Sensitive

Logic Low ≤ 2.0 VDC, Logic High ≥ 3.0 Impedance: 4.7 KΩ to +Voltage Response Time: 25 ms Functions: Input 1 - Remote Reset; Input 2 - Security Lockout

Outputs: Solid State: NPN open collector, 30 VDC max., 100 mA max.

Relay: SPDT, 2 amp resistive @ 110 VAC Latency: 75 µ seconds, plus 8 ms for relay pull-in

Communication: RS-485; Serial asynchronous, UART to UART;

Open ASCII: One start bit, even parity seven data bits, one stop bit; Baud Rate selectable from 9600, 4800, 2400, or 1200 Maximum Zones: 99

Supply Voltage: 90-264 VAC, 50/60 Hz, or 20-50 VAC/VDC; 4 Watts

Accessory Power Supply: 9-15 (unregulated VDC), 125 mA max. Display: Red/Green, 7 segment LED

Primary display: 5 digits, 0.71" (18mm) height Secondary display: single digit, 0.3" (7mm) height Annunciators: Output 1 & Output 2 (for Dual & Batch units) status

Dimensions: 48mm x 96mm, 110mm deep Mounting: Panel mount (mounting bracket supplied), 45mm x 92mm

cutout

Connections: Screw type terminals - combination head Front Panel Rating: NEMA 4X/IEC IP65 Case Material: GE Lexan 940 Weight: 0.56 lbs. Operating Temp.: 0° to 55° Celsius, 32° to 131° Fahrenheit Storage Temp.: -20° to 80° Celsius, -4° to 176° Fahrenheit Relative Humidity: 20% to 95% non-condensing Approvals: CE; UL, CUL recognized

Ordering Information:

C62

Dimensions:

VEEDER-ROOT

2nd Relay Option 0 None 1 2nd Relay

Dual & Batch Units)

82344

RST

PGM

96mm

Panel Cutout: 45mm x 92mm(1.77" x 3.62")

Function 7 Single Preset 8 Dual Preset 9 Batch

(only with

OP1 OP2

48mm

Power Supply 0 90-264 VAC 2 20-50 VAC/VDC

Serial Communication Option 0 None 5 RS-485

100mm

10mm

2.08

DANAHER INDUSTRIAL CONTROLS