Veeder Root C628 AWESOME Elapsed Timers Catalog Page
VEEDER-ROOT
PGM
RST
OP1
OP2
48mm
96mm
82344
VEEDER-ROOT
100mm
10mm
VEEDER-ROOT brand
Electronic Timers
The Veeder-Root brand C628 Elapsed Timer is a member of a family of
1/8 DIN instruments which offer breakthrough display technology as well
as easy-to-program user setup. Its large LED display features the ability
to change color based on process status such as exceding the preset
value. Therefore, when monitoring an application's elapsed time, the
C628 can provide operators with an instant visual alert to changes in the
application's status.
■ AWESOME 0.71” high digit LED display (27% larger than other 1/8
DIN units)
■ Programmable color change display based on an event
■ Programmable help function and secondary legend display
■ Programmable for single input or cumulative operation
■ Choice of NPN or PNP primary input
■ Filter speed settable for 20, 200, or 10,000 Hz
■ Standard outputs: 1 NPN transistor & 1 relay
■ Front panel reset enable and preset/alarm lockout
■ Optional RS-485 plug in card
■ CE approved, UL, CUL recognized
The C628 Elapsed Timer has a definable set value at which an output
will activate. The unit can be programmed to operate in a cumulative
(elapsed time continues to accumulate during all instances when the
input is active) or single (time value will display the elapsed time of an
individual input and will reset to zero for each successive new pulse)
input function mode. In addition, the time format (seconds, minutes,
hours, minutes & seconds, or hours & minutes) and timing direction (up
or down) can be selected.
C628 AWESOME Elapsed Timers
Large, blazing bright,
color-changing display…
cumulative or single
timing operation
All in the family - Matching C628 series
products in other sections of this catalog:
C628 Totalizers: Section 1
C628 Counters & Position Indicators: Section 2
C628 Rate Meters: Section 4
File No.: E185087
Display: Red/Green, 7 segment LED
Primary display: 5 digits, 0.71" (18mm) height
Secondary display: single digit, 0.3" (7mm) height
Time Formats: Seconds, Minutes, and Hours: XXX.X
Minutes & Seconds and Hours & Minutes: XX.XX
Dimensions: 48mm x 96mm, 110mm deep
Mounting: Panel mount (mounting bracket supplied), 45mm x 92mm
cutout
Connections: Screw type terminals - combination head
Front Panel Rating: NEMA 4X/IEC IP65
Case Material: GE Lexan 940
Weight: 0.56 lbs.
Operating Temp.: 0° to 55° Celsius, 32° to 131° Fahrenheit
Storage Temp.: -20° to 80° Celsius, -4° to 176° Fahrenheit
Relative Humidity: 20% to 95% non-condensing
Approvals: CE, UL, CUL
Ordering Information:
Power Supply
0 90-264 VAC
2 20-50 VAC/VDC
C
62
8
0
60
5
T
E
L
O
T
E
T
I
C
A
M
T
L
E
R
R
I
O
S
N
Z
I
I
C
N
G
SPECIFICATIONS
Count Inputs: Sinking/Sourcing or Contact Closure
Frequency: 10 kHz max.
Logic Low ≤ 2.0 VDC, Logic High ≥ 3.0, 30V max.
Impedance: 10 KΩ to common - Sourcing; 4.7 KΩ to +Voltage Sinking
Control Inputs: Sinking, Edge Sensitive
Logic Low ≤ 2.0 VDC, Logic High ≥ 3.0
Impedance: 4.7 KΩ to +Voltage
Response Time: 25 ms
Functions: Input 1 - Remote Reset; Input 2 - Security Lockout
Outputs: Solid State: NPN open collector, 30 VDC max., 100 mA max.
Relay: SPDT, 2 A resistive@ 110 VAC
Latency: 75 µ seconds, plus 8 ms for relay pull-in
Communication: RS-485; Serial asynchronous, UART to UART;
Open ASCII: One start bit, even parity seven data bits, one stop bit;
Baud Rate selectable from 9600, 4800, 2400, or 1200
Maximum Zones: 99
Supply Voltage: 90-264 VAC, 50/60 Hz, or 20-50 VAC/VDC; 4 Watts
Accessory Power Supply: 9-15 (unregulated VDC), 125 mA max.
Serial
Communication
Option
0 None
5 RS-485
Dimensions:
Panel Cutout: 45mm x 92mm (1.77" x 3.62")
VEEDER-ROOT • EAGLE SIGNAL • DYNAPAR
5.21
Loading...