Veeder Root C628 AWESOME Display Totalizer Catalog Page

VEEDER-ROOT brand

Electronic Totalizing Counters

C628 AWESOME Display Totalizer

The Veeder-Root brand C628 Totalizer is a member of a family of 1/8 DIN instruments which offer breakthrough display technology as well as easy-to-program user setup. Its large LED display features the ability to change color based on process status such as exceeding the count preset. Therefore, when monitoring item or piece counting, length measurement, or other critical values, the C628 provides operators with an instant visual alert to changes in the application's status.

■ AWESOME 0.71” high digit LED display (27% larger than other 1/8

DIN units)

■ Programmable color change display based on an event

■ Programmable help function and secondary legend display

■ Choice of NPN or PNP primary input

■ Filter speed settable for 20, 200, or 10,000 Hz

■ Front panel reset enable and preset lockout

■ Optional RS-485 plug in card

■ CE approved, UL, CUL recognized

The bidirectional C628 totalizer provides count/direction operation and A+B or A-B operation, as well as a phased input from an encoder (quadrature). The front panel is rated NEMA 4X/IEC IP65 for use in washdown or dusty environments.

Powerful, full-featured totalizer with large, blazing bright display… alerts by changing color

All in the family - Matching C628 series products in other sections of this catalog:

C628 Counters & Position Indicators: Section 2 C628 Rate Meters: Section 4 C628 Elapsed Timers: Section 5

File No.: E185087

RECOGNIZED

Mounting: Panel mount (mounting bracket supplied), 45mm x 92mm

cutout

Connections: Screw type terminals - combination head Front Panel Rating: NEMA 4X/IEC IP65 Case Material: GE Lexan 940 Weight: 0.56 lbs. Operating Temp.: 0° to 55° Celsius, 32° to 131° Fahrenheit Storage Temp.: -20° to 80° Celsius, -4° to 176° Fahrenheit Relative Humidity: 20% to 95% non-condensing Approvals: CE; UL, CUL recognized

Ordering Information:

Power Supply 0 90-264 VAC 2 20-50 VAC/VDC

RECOGNIZED

SPECIFICATIONS

Count Inputs: Sinking/Sourcing or Contact Closure

Frequency: 10 kHz max. (5 kHz in quadrature mode) Logic Low ≤ 2.0 VDC, Logic High ≥ 3.0, 30V max. Impedance: 10 KΩ to common - Sourcing; 4.7 KΩ to +Voltage Sinking

Calibrator: Multiplier 0.0001 to 9.9999 Control Inputs: Sinking, Edge Sensitive

Logic Low ≤ 2.0 VDC, Logic High ≥ 3.0 Impedance: 4.7 KΩ to +Voltage Response Time: 25 ms Functions: Input 1 - Remote Reset; Input 2 - Security Lockout

Communication: RS-485; Serial asynchronous, UART to UART;

Open ASCII: One start bit, even parity seven data bits, one stop bit; Baud Rate selectable from 9600, 4800, 2400, or 1200 Maximum Zones: 99

Supply Voltage: 90-264 VAC, 50/60 Hz, or 20-50 VAC/VDC; 4 Watts Accessory Power Supply: 9-15 (unregulated VDC), 125 mA max. Display: Red/Green, 7 segment LED

Primary display: 5 digits, 0.71" (18mm) height Secondary display: single digit, 0.3" (7mm) height

Dimensions: 48mm x 96mm, 110mm deep

1.02

DANAHER INDUSTRIAL CONTROLS

Dimensions:

VEEDER-ROOT

82344

RST

PGM

96mm

Panel Cutout: 45mm x 92mm (1.77" x 3.62")

Serial Communication Option 0 None 5 RS-485

OP1 OP2

48mm

10mm

100mm

9/24/98