Veeder Root C342 Time Totalizer Catalog Page
VEEDER-ROOT brand
Sold by AA Electric 1-800-237-8274 • Lakeland, FL • Lawrenceville, GA • East Rutherford, NJ www.A-Aelectric.com njsales@a-aelectric.com
Electronic Timers
A very compact elapsed time meter available in two operating modes:
Hours:Minutes:Seconds, or Hours and 1/100 Hour. Standard versions
are offered with an 8 digit LCD display or 6 digit LED display. Chose
from self powered models containing a permanent 7 year lithium battery,
or from models accepting an external 12 - 24 VDC power supply.
Externally powered units utilize a nonvolatile RAM to keep timed data
during absence of power.
Easy field programing allows interface to PNP or NPN start/stop signals,
or you may choose a model that directly accepts high voltage AC or DC
(12-250 VAC/DC) as its input.
LED models are available with an optional factory programmed preset
limit (preset-time specified when ordered) and feature a transistor output
that can perform control functions or interact with a PLC. A 6 character
alphanumeric message (characters derived from seven segment
pattern) can be programmed to appear when the preset time value is
reached.
■ Available with a 8 digit LCD display or a 6 digit LED
■ LED units offer factory entered preset values, and transistor output
■ Choose from internal battery or DC powered units
■ Field programmable to accept PNP or NPN signals, with models
available for high voltage inputs
■ Compact 1/32 DIN bezel size and short depth
■ Display can be reset from the front panel or remotely; front reset
button can be disabled
■ IP65 rated front panel for use in washdown environments
C342 Time Totalizer
Ultra-compact 1/32 DIN
hourmeters… available with
LCD or LED display and
AC/DC inputs
All in the family - Matching C342 series products in other sections of this catalog:
C342 Totalizing Counters: Section 1
C342 Tachometers/Rate Indicators: Section 4
Display: LCD: 7.0mm high; LED: 7.6mm high
Time Mode: Hours:Minutes:Seconds, or Hours (1/100 resolution)
Operating Temperature: -10°C to 50°C
Front Panel Rating: IEC IP65
Approvals: CE
Model No. Time Power Signal Display Control
Range Supply Input Type/Digits Output
C342-1464 H:M:S Lithium NPN/PNP LCD/8
C342-2464 H:1/100 Lithium NPN/PNP LCD/8
C342-1474 H:M:S Lithium 12 - 250AC/DC LCD/8
C342-2474 H:1/100 Lithium 12 - 250AC/DC LCD/8
C342-1462 H:M:S 12 - 24VDC NPN/PNP LCD/8
C342-2462 H:1/100 12 - 24VDC NPN/PNP LCD/8
C342-1562 H:M:S 12 - 24VDC NPN/PNP LED/6 *C342-1562A
C342-2562 H:1/100 12 - 24VDC NPN/PNP LED/6 *C342-2562A
* Optional factory programmed preset limit with transistor output. Preset limit
value must be specified at time of order. A 6 character alphanumeric message
(characters derived from seven segment pattern) may also be specified to appear
when the preset time value is reached.
5
T
E
L
O
T
E
T
I
C
A
M
T
L
E
R
R
I
O
S
N
Z
I
I
C
N
G
All units are packaged in a compact 1/32 DIN size case with depths as
short as 32mm. The front panel is rated IEC IP65 for use in washdown
environments. The C342 series also includes matching indicators for
count-totalizing, position indication, and rate metering, as well as an
alphanumeric message display. All are in a uniform 24 x 48 millimeters
bezel size package.
SPECIFICATIONS
Input, NPN/PNP models: Signal field selectable;
Logic Low < 0.7 VDC, Logic High > 5 VDC; 30 VDC max.
Input, AC/DC input models: 12 - 250 VAC/VDC
Optional Output: PNP, 10mA
Power Source:
External Power Supply Models: 12 -24 VDC +20%/-10%
Internally Powered Models: Lithium Battery, 7 years typical life
Dimensions:
48 mm
VEEDER-ROOT
24
9999:59:59
mm
12345678
Panel Cutout: 22, ±0.3mm x 45, ±0.6mm
8
See Note
mm
Note: C342-1464, -2464, -1462, -2462= 32mm
C342-1562, -2562, -1474, -2474= 60mm
32
mm
DANAHER INDUSTRIAL CONTROLS
Mounting
Grooves
Bracket Arm
5.13
Loading...